Monitoring of cutting process in end milling of hard and brittle materials

• Autorzy: Shimana K. , Kondo E. , Yoshidome A. , Yamashita S. , Kawano Y.
• Języki publikacji: EN

Abstrakty

EN

Glass materials have been widely used in optical components in recent years. The purpose of this study was to develop an effective method for real-time detection of the state of cutting tools used in end milling of hard brittle materials. Cutting tests were performed to identify parameters that are useful in monitoring micro tool wear in glass milling. A specific component of the cutting force was found to be related to the progression of tool wear. Furthermore, using fast Fourier transform (FFT) analysis, the peak amplitudes of the cutting forces were found to occur at a specific frequency.

Słowa kluczowe

EN

glass milling; micromachining; brittle materials; end mill

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2014
• Tom: Vol. 14, No. 4
• Strony: 55--64
• Opis fizyczny: Bibliogr. 6 poz., tab., rys.

Twórcy

autor

Shimana K.

• Kagoshima National College of Technology, Department of Electronic Control Engineering, Kagoshima, Japan

autor

Kondo E.

• Kagoshima University, Graduate School of Science and Engineering, Kagoshima, Japan

autor

Yoshidome A.

• Kagoshima National College of Technology, Department of Electronic Control Engineering, Kagoshima, Japan

autor

Yamashita S.

• Kagoshima National College of Technology, Department of Electronic Control Engineering, Kagoshima, Japan

autor

Kawano Y.

• Kagoshima National College of Technology, Department of Electronic Control Engineering, Kagoshima, Japan

Bibliografia

• [1] LAI X., et al, 2008, Modeling and analysis of micro scale milling considering size effect, micro cutter edge radius and minimum chip thickness, Int. J. Mach. Tools Manufac., 48, 1–14.
• [2] RAHMAN M., et al, 2001, Micro milling of pure copper, J. Mat. Proc. Tech., 116, 39–43.
• [3] JEMIELNIAK K., et al, 2008, Application of AE and cutting force signals in tool condition monitoring in micromilling, CIRP J. Manufac. Sci. Tech., 1, 97–102.
• [4] MALEKIAN M., et al, 2009, Modeling of dynamic micro-milling cutting forces, Int. J. Mach. Tools Manufac., 49, 586–598.
• [5] MATSUMURA T., et al, 2005, A study on cutting force in the milling process of glass, J. Manufac. Proc., 7–2, 102–108.
• [6] ONO T., et al, 2008, Influence of tool inclination on brittle fracture in glass cutting with ball end mills, J. Manufac. Proc. Tech., 202, 61–69.