Supervision over technological and measurement processes

• Autorzy: Karkoszka T. , Galus K
• Języki publikacji: EN

Abstrakty

EN

Purpose: of the paper has been an attainment of the thesis: “If there is something we can define, we can measure it. If there is something we can measure, we can analyse that. If there is something we can analyse, we can supervise that. If there is something we can supervise, we can improve that [1]”. Design/methodology/approach: used for the analysis has covered proposition of the supervision over measurement processes system that can be applied in quality assurance. Findings: of analysis are as follows: system of supervision over measurement processes performed (in compliance with real), realised in an organisation processes, can assure the achievement of the accurate and reliable results that, being the base of any feedback in any process, have fundamental meaning in making appropriate decisions. Practical implications: can be applied in case of any organisation, wanting to demonstrate the conformity of processes in the range of requirements that apply to: products, workers, natural environment and others by supervision over measurement equipment. Originality/value: of the presented paper has been obtained by working out the design of supervision over measurement system, also measurement system capability, which should be supplement for supervision over processes system in the assurance of processes and products quality.

Słowa kluczowe

EN

improvement of process; measurement processes; supervision over measurement; calibration; measurement capability

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2011
• Tom: Vol. 44, nr 1
• Strony: 96--102
• Opis fizyczny: Bibliogr. 24 poz., rys., tab.

Twórcy

autor

Karkoszka T.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

autor

Galus K

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

Bibliografia

• [1] M. Brzeziński, Production organization. Design of production systems, Placet Publ., Warsaw, 2007.
• [2] W.J. Latzko, D.M. Saunders, Four days with Dr Deming. A strategy for modern methods of management, Addison Wesley Publ., 2007.
• [3] L.A. Dobrzański, M. Roszak, Implementation and functioning of quality management in research centre, Journal of Achievements in Materials and Manufacturing Engineering 30/2 (2008) 197-203.
• [4] M. Dudek-Burlikowska, Aspects of improving the organization directed to the quality, Journal of Achieyements in Materials and Manufacturing Engineering 43/2 (2006) 101-108.
• [5] S. Thamizhmanii, S. Hasan, A review on an employee empowerment in TQM practice, Journal of Achievements in Materials and Manufacturing Engineering 39/2 (2010) 204-210.
• [6] J.J. Dahlgaard, K. Kristensen, G.K. Kanji, Basis of quality management, PWN Publ., Warsaw, 2000.
• [7] PN-EN ISO 9000. Quality management system. Fundamentals and vocabulary, PKN Publ., Warsaw, 2006.
• [8] M.T. Roszak, D. Szewieczek, Application of value analysis in processes of cog-wheels production, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 559-562.
• [9] D. Szewieczek, T. Karkoszka, A. Zając, Analysis of the clients’ satisfaction in the accredited laboratory, Journal of Achievements in Materials and Manufacturing Engineering 35/1 (2009) 95-102.
• [10] J. Michalska-Ćwiek, Enterprise’s eyaluation according to the polish quality award's criteria, Journal of Achievements in Materials and Manufacturing Engineering 36/2 (2009) 199-206.
• [11] T. Karkoszka, D. Szewieczek, Control of measurement equipment in the aspect of integrated quality management, Journal of Achievements in Materials and Manufacturing Engineering 40/1 (2010) 95-102.
• [12] PN-EN ISO 9001. Quality management system. Requirements, PKN Publ., Warsaw, 2009.
• [13] PN-EN ISO 14001. Environmental management systems. Requirements with guidance for use. PKN Publ., Warsaw, 2004.
• [14] PN-N-18001, Occupational health and safety management systems. Requirements, PKN Publ., Warsaw, 2004.
• [15] PN-EN ISO 10012:2003, Measurement management systems. Requirements for measurement processes and measuring equipment, PKN Publ., Warsaw, 2004.
• [16] E. Jarysz-Kamińska, Control of test and measurement equipment. Regulations and legal requirements, Diagnostics 2/38 (2006) 129.
• [17] W. Jakubiec, J. Malinowski, Metrology of geometric values, WNT Publ., Warsaw, 2007.
• [18] P. Gniatkowski, Control of measurement and test equipment, Ministry of Economy Publ., Warsaw, 1995.
• [19] R. Wacławski, Measurement, monitoring and test equipment, Ministry of Industry and Commerce Publ., Warsaw, 1994.
• [20] M. Michalski, Quality assurance of measurement equipment in measurement laboratory, Ministry of Industry and Commerce Publ., Warsaw, 1995.
• [21] International dictionary of basic terms in metrology, Central Office of Measures Publ., Warsaw, 1996.
• [22] J. Kolasa, Legalisation, authentication and calibration. Metrology in quality systems, Proceedings of the 6th Symposium of Polish ISO Forum Club, Kielce, 2000, 89.
• [23] PN-EN ISO/IEC 17000:2006, Conformity assessment. Terminology and principles, PKN Publ., Warsaw, 2006.
• [24] The Timken Company materials, Sosnowiec, 2009.