Calculation of LCC and LCP of a rail vehicle with the software support

• Autorzy: Ruman F. , Grenčík J.
• Języki publikacji: EN

Abstrakty

EN

Nowadays complex demands are required from products to be reliable and provide their functions safe and without impacts on the environment. When deciding on the purchase of a product, the deciding factor is not only the acquisition costs, but also operating costs, preventive maintenance and corrective maintenance costs and the disposal costs as well. The manufacturer must design a product that will be failure-free and competitive, with the costs as low as possible, which can be achieved through the optimization of acquisition costs, cost of ownership and disposal costs. Ideally, this process should start from the very beginning of the product life and should be evolving with respect to all of the costs to be incurred throughout the life cycle. The aim of the work was to create own methodology for the calculation of costs and profits for the life cycle of a rail vehicle in terms of manufacturer and the operator to comply with all the relevant principles of the EN 60300-3-3 standard. The created methodology was implemented into the MS Excel software. The data on costs and profits during the life cycle of a tram were input into the software data. The data are mutually interconnected and may be monitored for any individual change that will affect other costs or profits for life cycle of a tram.

Słowa kluczowe

EN

tram; LCC; LCP; software

PL

tramwaj; LCC; LCP; oprogramowanie

• Wydawca: Sieć Badawcza Łukasiewicz - Poznański Instytut Technologiczny
• Czasopismo: Logistyka
• Rocznik: 2015
• Tom: nr 4
• Strony: 5539--5546, CD2
• Opis fizyczny: Bibliogr. 3 poz., rys., tab.

Twórcy

autor

Ruman F.

• Department of Transport and Handling Machines, Faculty of Mechanical Engineering, University of Zilina

autor

Grenčík J.

• Department of Transport and Handling Machines, Faculty of Mechanical Engineering, University of Zilina

Bibliografia

• 1. Dopravný podnik mesta Bratislava.
• 2. Kjellsson, U.: Unife – unilife and Unife – Unidata – the first European life cycle cost interface software model: research report, 2000. 8 pp.
• 3. STN EN 60300-3-3: 2005, Manažérstvo spoľahlivosti. Časť 3-3: Návod na používanie. Náklady počas životnosti.

Uwagi

This paper is the result of the project implementation: Modern methods of teaching of control and diagnostic systems of engine vehicles, ITMS code 26110230107, supported by the Operational Programme Educational.