Modeling of Joint Operation of a Ground Soil Heat Exchanger and a Thermal Pump Evaporator

• Autorzy: Sydorchuk Bogdan , Naumchuk Oleksandr , Mazurek Paweł A.

Identyfikatory

DOI

10.12911/22998993/131177

• Języki publikacji: EN

Abstrakty

EN

The development of civilization is associated with an increase in demand for energy. Nowadays, the technologies using renewable energy sources are particularly important. The heating systems powered by heat pumps are increasingly used. The article presents an integrated mathematical model that takes into account the joint operation of the ground heat exchanger and the internal circuit of the heat pump. Modeling was done in Matlab environment. The modeling results allow optimizing the evaporator design in order to effectively use the heat pump.

Słowa kluczowe

EN

ground heat exchanger; thermal pump

• Wydawca: Polskie Towarzystwo Inżynierii Ekologicznej ; Lublin University of Technology
• Czasopismo: Journal of Ecological Engineering
• Rocznik: 2021
• Tom: Vol. 22, nr 2
• Strony: 256--261
• Opis fizyczny: Bibliogr. 10 poz., rys.

Twórcy

autor

Sydorchuk Bogdan

• Department of Automation and Computer-Integrated Technologies, National University of Water and Environmental Engineering, Ukraine, 33028, Rivne, 11 Soborna St., Ukraine

• https://orcid.org/0000-0001-6112-9535

autor

Naumchuk Oleksandr

• Department of Automation and Computer-Integrated Technologies, National University of Water and Environmental Engineering, Ukraine, 33028, Rivne, 11 Soborna St., Ukraine

• https://orcid.org/0000-0003-2483-4141

autor

Mazurek Paweł A.

• Faculty of Electrical Engineering and Computer Science, Lublin University of Technology, ul. Nadbystrzycka 38A, 20-618 Lublin, Poland

• https://orcid.org/0000-0002-7098-2084

Bibliografia

• 1. Bomba A., Sydorchuk B., Prysiazhniuk O. 2014. Modelni synhuliarno zbureni zadachi protsesiv vidboru hruntovoho tepla. Visnyk TNTU – Ternopil: TNTU, 74(2), 223–231.
• 2. Cao Y., Faghri A. 1994. Conjugate analysis of a flatplate type evaporator for capillary pumped loops with three-dimensional vapor flow in the groove. International Journal of Heat and Mass Transfer, 37(3), 401–409.
• 3. Chen Y., Halm N.P., Groll E.A. et al. 2002. Mathematical modeling of scroll compressors – part I: compression process modeling. International Journal of Refrigeration, 25(6), 731–750.
• 4. Eskilson P. Claesson J., 1988. Simulation model of thermally interacting heat extraction boreholes. Numerical Heat Transfer, 13, 149–165.
• 5. Lewkowicz M., Alsaqoor S., Alahmer A., Borowski G. 2018. Modeling and optimization of transparent thermal insulation material. Journal of Solar Energy Engineering – Transactions of the ASME, 140(5), Art. no. 054501.
• 6. Nishikawara M., Nagano H., Mottet L., Prat M. 2014. Numerical study of thermal performance of a capillary evaporator in a loop heat pipe with liquidsaturated wick. Journal of Electronics Cooling and Thermal Control, 4, 118–127.
• 7. Rej D. Makmajkl D. 1982. Teplovye nasosy. Energoizdat, 224.
• 8. Tarasova V.A. Kharlampidi D.Kh., Sherstyuk A.V. 2011. Modelirovanie teplovykh rezhimov sovmestnoj raboty gruntovogo teploobmennika i teplonasosnoj ustanovki. Vostochno-evropejskij zhurnal peredovy`kh tekhnologij, 5/8 (53), 34–40.
• 9. Vasilev G.P. 2006. Teplokhladosnabzhenie zdanij i sooruzhenij s ispolzovaniem nizkopotenczialnoj teplovoj energiej poverkhnostnykh sloyov zemli. Izdatelskij dom “Granicza”, 176.
• 10. Yantovskij E.I., Pustovalov Yu.V 1982. Energoizdat, 285.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).