Modelling the power losses in the ferromagnetic materials

• Autorzy: Detka K. , Górecki K.

Identyfikatory

DOI

10.1515/msp-2017-0050

• Języki publikacji: EN

Abstrakty

EN

In this paper, the problem of describing power losses in ferromagnetic materials is considered. The limitations of Steinmetz formula are shown and a new analytical description of losses in a considered material is proposed. The correctness of the developed description is demonstrated experimentally by comparing the results of calculation with the catalogue characteristics for different ferromagnetic materials.

Słowa kluczowe

EN

ferromagnetic material; power loss; modelling; powder cores; ferrite cores; nanocrystalline cores

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2017
• Tom: Vol. 35, No. 2
• Strony: 398--404
• Opis fizyczny: Bibliogr. 14 poz., rys., tab.

Twórcy

autor

Detka K.

• Gdynia Maritime University, Department of Marine Electronics, Morska 81 – 87, 81-225 Gdynia, Poland

autor

Górecki K.

• Gdynia Maritime University, Department of Marine Electronics, Morska 81 – 87, 81-225 Gdynia, Poland

Bibliografia

• [1] BOSSCHE VAN DEN A., VALCHEV V.C., Inductors and transformers for power electronics, Taylor & Francis Group, Florida, 2005.
• [2] BARLIK R., NOWAK M., Energoelektronika - elementy, podzespoły, układy (Power electronics: elements and components, systems), Oficyna Wydawnicza Politechniki Warszawskiej, Warsaw, 2014.
• [3] GÓRECKI K., DETKA K., Mater. Sci. Eng. B-Adv., 177 (15) (2012), 1248
• [4] BOZORTH R., Ferromagnetism, D. Van Nostrand Company, Princeton, 1951.
• [5] CULLITY B.D, GRAHAM C.D., Introduction to magnetism material, John Wiley and Sons, New Jersey, 2011.
• [6] GOODENOUGH J.B., IEEE T. Magn., 38 (5) (2002), 3398.
• [7] GÓRECKI K., ZARĘBSKI J., DETKA K., Application of the electrothermal average inductor model for analyses of boost converters, in: NAPIERALSKI A. (Ed.), Proceedings of 22nd International Conference Mixed Design of Integrated Circuits and Systems Mixdes 2015, Lodz, (2015), 417.
• [8] PARCHOMIUK M., IAPGOS, 4 (2014), 113.
• [9] BERTOTTI G., FIORILLO F., SOARDO G., J. Phys. Colloq., 49 (1988).
• [10] WCIŚLIK M., SUCHENIA K., Przeglad Elektrotechniczny, 92 (2) (2016), 152.
• [11] POPESCU M., MILLER T., MCGLIP M., IONEL D., DELLINGER S., HEIDEMANN R., On the Physical Basis of Power Losses in Laminated Steel and Minimum-Effort Modeling in an Industrial Design Environment, in: Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, New Orleans, (2007), 60.
• [12] OLIVIER CH., Switch. Power Mag., 3 (2) (2002), 28.
• [13] GÓRECKI K., DETKA K, Inform. MIDEM, 45 (1) (2015), 29.
• [14] ZARĘBSKI J., GÓRECKI K., Int. J. Numer. Model. El., 15 (2) (2002), 181.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).