Anti‑impact and vibration‑damping design of cork‑based sandwich structures for low‑speed aerial vehicles

• Autorzy: Sheikhi Mohammad Rauf , Gürgen Selim , Altuntas Onder , Sofuoğlu Mehmet Alper

Identyfikatory

DOI

10.1007/s43452-023-00613-x

• Języki publikacji: EN

Abstrakty

EN

Nowadays, lightweight and eco-friendly composites with improved mechanical properties are highly interesting. Sandwich-structured composites are a type of high-performance structural composite that is lightweight with a high strength-to-weight ratio and excellent specifc energy absorption capabilities. In this study, cork-based sandwich structures resistant to impact and vibrations were designed and produced for the possibility of being used in the protective structures of low-speed aerial vehicles. To identify and match the best combination of different face sheets with a cork core, first, aramid fabric-reinforced polymer (AFRP), carbon fiber-reinforced polymer (CFRP), and glass fiber-reinforced polymer (GFRP) face-sheet composites were produced using the compression molding method (prepreg layup). Then, sandwich structures consisting of AFRP, CFRP, GFRP, and aluminum face sheets with a fixed core layer of cork were designed and assembled. Since the design goal of these structures is to use them in low-speed aerial vehicles, impact deceleration and vibration tests were applied to face sheets and sandwich structures individually, which are the most important factors involved in these structures during fight, particularly in rotary-wing drone applications. A low-energy drop-tower system was used for the calculation of deceleration results. Besides, the vibration properties of the structures were investigated using the modal analysis method and based on the natural frequency responses of the tested face sheets and sandwich structures, damping ratios and structural stiffness were measured. According to the results, compared to other face sheets, CFRP showed better resistance along with the cork core, when the structure was exposed to impact and vibration threats. This study provides useful information on cork core sandwich structures for academic and industrial researchers in choosing the right face sheet.

Słowa kluczowe

EN

cork composite; sandwich structure; impact properties; vibration damping

PL

kompozyt korkowy; konstrukcja warstwowa; tłumienie drgań

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2023
• Tom: Vol. 23, no. 2
• Strony: art. no. e71, 2023
• Opis fizyczny: Bibliogr. 35 poz., rys., tab., wykr.

Twórcy

autor

Sheikhi Mohammad Rauf

• Key Laboratory of Traffic Safety On Track of Ministry of Education, School of Traffic and Transportation Engineering, Central South University, Changsha 410075, Hunan, China
• Faculty of Aeronautics and Astronautics, Eskişehir Technical University, Eskişehir, Turkey
• State Key Laboratory for Strength and Vibration of Mechanical Structures, Shaanxi ERC of NDT and Structural Integrity Evaluation, School of Aerospace Engineering, Xi’an Jiaotong University, Xi’an 710049, China

autor

Gürgen Selim

• Department of Aeronautical Engineering, Eskişehir Osmangazi University, Eskişehir, Turkey

autor

Altuntas Onder

• Faculty of Aeronautics and Astronautics, Eskişehir Technical University, Eskişehir, Turkey

autor

Sofuoğlu Mehmet Alper

• Department of Mechanical Engineering, Eskişehir Osmangazi University, Eskişehir, Turkey

Bibliografia

• 1. Mangalgiri P. Composite materials for aerospace applications. Bull Mater Sci. 1999;22(3):657-64.
• 2. Castanié B, Bouvet C, Ginot M. Review of composite sandwich structure in aeronautic applications. Compos Part C Open Access. 2020;1: 100004.
• 3. Vinson JR. Sandwich structures: past, present, and future. In: Sandwich structures 7: advancing with sandwich structures and materials. Springer; 2005. p. 3-12.
• 4. Davies JM. Lightweight sandwich construction. Wiley; 2008.
• 5. Feng Y, et al. Creative design for sandwich structures: a review. Int J Adv Rob Syst. 2020;17(3):1729881420921327.
• 6. Ma W, Elkin R. Sandwich structural core materials and properties. In: Sandwich structural composites. CRC Press; 2021. p. 1-72.
• 7. Fernandes F, Pascoal R, De Sousa RA. Modelling impact response of agglomerated cork. Mater Des. 2014;58:499-507.
• 8. Fernandes F, et al. Comparing the mechanical performance of synthetic and natural cellular materials. Mater Des. 2015;82:335-41.
• 9. Gil L. Cork composites: a review. Materials. 2009;2(3):776-89.
• 10. Ptak M, et al. Assessing impact velocity and temperature effects on crashworthiness properties of cork material. Int J Impact Eng. 2017;106:238-48.
• 11. Castro O, et al. Cork agglomerates as an ideal core material in lightweight structures. Mater Des. 2010;31(1):425-32.
• 12. Santos Silva J, Dias Rodrigues J, Moreira R. Application of cork compounds in sandwich structures for vibration damping. J Sandwich Struct Mater. 2010;12(4):495-515.
• 13. Gil L. Cork: sustainability and new applications. Front Mater. 2015;1:38.
• 14. Yoon S, et al. Detection of core-skin disbonds in honeycomb composite sandwich structures using highly nonlinear solitary waves. Compos Struct. 2021;256: 113071.
• 15. Gundberg TA. Face sheet materials for sandwich composites. In: Sandwich structural composites. CRC Press; 2021. p. 85-123.
• 16. Palomba G, Crupi V, Epasto G. Collapse modes of aluminium honeycomb sandwich structures under fatigue bending loading. Thin-Walled Struct. 2019;145: 106363.
• 17. Zenkert D. An introduction to sandwich construction. Engineering materials advisory services. 1995.
• 18. Xiong J, et al. Sandwich-walled cylindrical shells with lightweight metallic lattice truss cores and carbon fiber-reinforced composite face sheets. Compos A Appl Sci Manuf. 2014;56:226-38.
• 19. Sergi C, et al. Experimental and numerical analysis of the ballistic response of agglomerated cork and its bio-based sandwich structures. Eng Fail Anal. 2022;131: 105904.
• 20. Sutherland L, Soares CG. Impact resistance of cork-skinned marine PVC/GRP sandwich laminates. Thin-Walled Struct. 2022;180: 109830.
• 21. Fernandes F, et al. Manufacturing and testing composites based on natural materials. Procedia Manuf. 2017;13:227-34.
• 22. Di Bella G, Palomba G. Cork/aluminium double-layer sandwich panels under impact loading for lightweight ship structures. Int J Crashworthiness. 2022. https://doi.org/10.1080/13588265.2022.2130619.
• 23. Nashif AD, Jones DI, Henderson JP. Vibration damping. Wiley; 1991.
• 24. Chung D. Materials for vibration damping. J Mater Sci. 2001;36(24):5733-7.
• 25. Gürgen S, Sofuoğlu MA. Smart polymer integrated cork composites for enhanced vibration damping properties. Compos Struct. 2021;258: 113200.
• 26. Karpenko M, Nugaras J. Vibration damping characteristics of the cork-based composite material in line to frequency analysis. Theor Appl Mech. 2022;60:593-602.
• 27. Stewart R. Going green: eco-friendly materials and recycling on growth paths. Plast Eng. 2008;64(1):16-24.
• 28. Rosa W. Goal 12. Ensure sustainable consumption and production patterns. A new era in global health: nursing and the United Nations 2030 agenda for sustainable development. Springer; 2017. p. 345.
• 29. Kaczynski P, et al. High-energy impact testing of agglomerated cork at extremely low and high temperatures. Int J Impact Eng. 2019;126:109-16.
• 30. Kaczyński P, et al. Development and testing of advanced cork composite sandwiches for energy-absorbing structures. Materials. 2019;12(5):697.
• 31. Sheikhi MR, Gürgen S. Anti-impact design of multi-layer composites enhanced by shear thickening fluid. Compos Struct. 2022;279: 114797.
• 32. Gürgen S, et al. Development of eco-friendly shock-absorbing cork composites enhanced by a non-Newtonian fluid. Appl Compos Mater. 2021;28(1):165-79.
• 33. Fu Z-F, He J. Modal analysis. Elsevier; 2001.
• 34. Schwarz BJ, Richardson MH. Experimental modal analysis. CSI Reliability Week. 1999;35(1):1-12.
• 35. Correia JMD, Serra GF, de Alves Sousa RJ, Pereira AB, Fernandes FAO. Expanded (black) cork for the development of an eco-friendly surfboard: environmental impact and mechanical properties. Sustainability. 2022;14:668.

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).