Rotor fault compensation and detection in a sensorless induction motor drive

• Autorzy: Bednarz S.

Identyfikatory

DOI

10.5277/PED170101

• Języki publikacji: EN

Abstrakty

EN

The compensation and detection analysis of rotor faults in a sensorless induction motor drive system with an additional rotor resistance estimator has been conducted and the influence of the rotor faults on the properties of such system has been examined. The rotor flux vector and rotor speed have been reconstructed by the MRAS^CC estimator. The drive was tested for various conditions. Simulation tests were performed in the direct field oriented control (DFOC) structure realized in the MATLAB/Simulink software.

Słowa kluczowe

EN

rotor faults; DFOC; speed estimator; MRAS; parameter estimator

• Wydawca: De Gruyter
• Czasopismo: Power Electronics and Drives
• Rocznik: 2017
• Tom: Vol. 2 (37), No. 1
• Strony: 71--80
• Opis fizyczny: Bibliogr. 13 poz., rys., tab.

Twórcy

autor

Bednarz S.

• Wrocław University of Science and Technology, Department of Electrical Machines, Drives and Measurements, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland

Bibliografia

• [1] DYBKOWSKI M., Estimation of speed in a vector controlled induction motor drive – selected problems, Scientific Papers of the Institute of Electrical Machines, Drives and Measurements of Wrocław University of Technology, No. 67, ser. Monographs, No. 20, Wrocław, Poland, 2013 (in Polish).
• [2] FAN S., ZOU J., Sensor fault detection and fault tolerant control of induction motor drives for electric vehicles, Proc. 7th International Power Electronics and Motion Control Conference (IPEMC), Harbin, China, June 2012, 1306-1309.
• [3] JIANG J., XIANG Y., Fault-tolerant control systems. A comparative study between active and passive approaches, Ann. Rev. Control, 2012, 36 (1), 60-72.
• [4] JIANG L., Sensor fault detection and isolation using system dynamics identification techniques, PhD thesis, The University of Michigan, 2011.
• [5] KLIMKOWSKI K., DYBKOWSKI M., Fault tolerant control structure for induction motor drive system, Automatika – J. Control, Measure., Electr., Comp. Comm., 2016, 57 (3), 638-647.
• [6] KOWALSKI C.T., Diagnostics of the induction motor drives using artificial intelligence methods, Oficyna Wydawnicza Politechniki Wrocławskiej, Wrocław, Poland, 2013 (in Polish).
• [7] LEE K.S., RYU J.S., Instrument fault detection and compensation scheme for direct torque controlled induction motor drives, IEEE Proc. Control Theory Appl., 2003, 150 (4), 376-382.
• [8] ORŁOWSKA-KOWALSKA T., Sensorless induction motor drives, Oficyna Wydawnicza Politechniki Wrocławskiej, Wroclaw, Poland, 2003 (in Polish).
• [9] ORŁOWSKA-KOWALSKA T., DYBKOWSKI M., Stator current-based MRAS estimator for a wide range speed-sensorless induction motor drive, IEEE Trans. Ind. Electr., 2009, 57 (4), 1296-1308.
• [10] ORŁOWSKA-KOWALSKA T., DYBKOWSKI M., KOWALSKI C.T., Rotor fault analysis in the sensorless field oriented controlled induction motor drive, Automatika – J. Control, Measure., Electr., Comp. Comm., 2010, 57 (2), 149-156.
• [11] PAWLAK M., ORŁOWSKA-KOWALSKA T., Application of the simplified two axial model for rotor faults modeling of the induction motor, Electr. Rev., 2006, 82 (10), 48-53.
• [12] WIERZBICKI R., Diagnostics of the induction motor using state variable and parameter estimators, PhD thesis, Wrocław University of Technology, Wrocław 2011 (in Polish).
• [13] ZORGANI Y.A., KOUBAA Y., BOUSSAK M., Simultaneous estimation of speed and rotor resistance in sensorless ISFOC induction motor drive based on MRAS scheme, ICEM, Rome 2010.