PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The Impact of Laser Processing Parameters on the Properties of Electro-Spark Deposited Coatings

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper described properties of electro-spark deposited coatings under influence of the laser treatment process. The properties were assessed by analyzing the coating microstructure, X-ray radiation, microhardness, bonding strength, corrosion resistance, porosity and wear tests. The tests were conducted for Mo and Cu coatings (the anode) which were electro-spark deposited over the C45 steel substrate (the cathode) and melted with a laser beam. The coatings were deposited by means of an ELFA-541. The laser processing was performed with an Nd:YAG laser. The coatings after laser processing are still distinguished by very good performance properties, which make them suitable for use in sliding friction pairs.
Twórcy
autor
  • Kielce University of Technology, Centre for Laser Technologies of Metals, Al. 1000-lecia Państwa Polskiego 7, 25-314 Kielce, Poland
autor
  • Silesian University of Technology, Faculty of Materials Science and Metallurgy, Institute of Materials Science, 8 Krasińskiego Str., 40-019 Katowice, Poland
  • Cracow University of Technology, Faculty of Mechanical Engineering, Al. Jana Pawła II 37, 31-864 Cracow, Poland
autor
  • Cracow University of Technology, Department of Software Engineering and Applied Statistics, Al. Jana Pawła II 37, 31-864 Cracow, Poland
autor
  • University of Zilina, Univerzitna 1, 01-026 Zilina, Slovakia
  • Cracow University of Technology, Department of Software Engineering and Applied Statistics, Al. Jana Pawła II 37, 31-864 Cracow, Poland
Bibliografia
  • [1] A. Agarwal, N.B. Dahotre, Surf. Coat. Tech. 106, 242-250 (1998).
  • [2] B. Antoszewski, E. Evin, J. Audy, J. Tribol.-Trans. ASME 3, 253-262 (2008).
  • [3] A. V. Ribalko, O. Sahin, Surf. Coat. Tech. 168, 129-135 (2003).
  • [4] C. B. Tang, D. X. Liu, Z. Wang, Y. Gao, Appl. Surf. Sci. 257, 6364-6371 (2011).
  • [5] W. Kwaśny, T. Jung, Technical Trans. 2-M, 119-124 (2015).
  • [6] J. Lubas, Technical Trans. 7-M, 295-301 (2008).
  • [7] R. Ulewicz, J. Balk. Tribol. Assoc. 21, 166-172 (2015).
  • [8] R. Ulewicz, F. Novy, J. Selejdak, Adv. Mater. Res.-Switz. 874,43-48 (2014).
  • [9] A. Gadek-Moszczak, N. Radek, S. Wronski, J. Tarasiuk, Adv. Mater. Res.-Switz. 874, 133-138 (2014).
  • [10] J. Pietraszek, N. Radek, K. Bartkowiak, Solid State Phenom. 197, 198-202 (2013).
  • [11] N. Radek, J. Konstanty, Arch. Metall. Mater. 57, 665-670 (2012).
  • [12] N. Radek, E. Wajs, M. Luchka, Powder Metall. Met. C+ 47, 197-201 (2008).
  • [13] M. Scendo, J. Trela, N. Radek, Surf. Coat. Tech. 259, 401-407 (2014).
  • [14] B. Antoszewski, Adv. Mater. Res.-Switz. 874, 51-55 (2014).
  • [15] G. Ryk, I. Etsion, Wear 261, 792-796 (2006).
  • [16] W. Yi, X. Dang-Sheng, J. Mater. Process. Tech. 197, 96-100 (2008).
  • [17] N. Radek, J. Pietraszek, B. Antoszewski, Adv. Mater. Res.-Switz. 874, 29-34 (2014).
  • [18] O. Kempthorne, K. Hinkelmann, Design and analysis of experiments. Vol. 1. Introduction to experimental design, John Wiley & Sons, Hoboken, NJ, USA (2007).
  • [19] T. P. Ryan, Modern Experimental Design, John Wiley & Sons, Hoboken (2007).
  • [20] J. Pietraszek, A. Gadek-Moszczak, T. Torunski, Adv. Mater. Res.-Switz. 874, 139-143 (2014).
  • [21] Y. Pawitan, In All Likelihood: Statistical Modelling and Inference Using Likelihood, Clarendon Press, Oxford (2001).
  • [22] D. C. Montgomery, Design and Analysis of Experiments, John Wiley & Sons, Inc., Hoboken (2008).
  • [23] A. B. Owen, Empirical Likelihood, Chapman & Hall/CRC, Boca Raton (2001).
  • [24] E. Skrzypczak-Pietraszek, I. Kwiecien, A. Goldyn, J. Pietraszek, Phytochem. Lett. 20, 443-448 (2017).
  • [25] R. Dwornicka, Adv. Mater. Res.-Switz. 874, 63-69 (2014).
  • [26] U. Ferdek, M. S. Kozien, Acta Phys. Pol. A 123, 1044-1047 (2013).
  • [27] L. Skrzypczak, E. Skrzypczak-Pietraszek, E. Lamer-Zarawska, B. Hojden, Acta Soc. Bot. Pol. 63, 173-177 (1994).
  • [28] A. Szczotok, M. Sozanska, Prakt. Metallogr.-Pr. M. 46, 454-468 (2009).
  • [29] F. Deflorian, L. Ciaghi, J. Kazior, Werkst. Korros.-Mater. Corros. 43, 447-452 (1992).
  • [30] M. Hebda, S. Gadek, J. Kazior, J. Therm. Anal. Calorim. 108, 453-460 (2012).
  • [31] A. Tiziani, A. Molinari, J. Kazior, G. Straffelini, Powder Metall. Int. 22, 17-19 (1990).
  • [32] T. Wejrzanowski, S. Haj Ibrahim, J. Skibinski, K. Cwieka, K.J. Kurzydlowski, Image Anal. Stereol. 36, 105-110 (2017).
  • [33] A. Gadek-Moszczak, J. Pietraszek, B. Jasiewicz, S. Sikorska, L. Wojnar, Stud. Comput. Intell. 572, 127-136 (2015).
  • [34] J. Korzekwa, A. Gadek-Moszczak, M. Bara, Prakt. Metallogr.-Pr. M. 53, 36-49 (2016).
  • [35] A. V. Goroshko, V. P. Royzman, A. Bubulis, K. Juzenas, J. Vibroeng. 16, 2178-2187 (2014).
  • [36] A. Szczotok, Materialwiss. Werkst. 46, 320-329 (2015).
  • [37] A. Goroshko, V. Royzman, V. Ostasevicius, Mechanika 22, 206-211 (2016).
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-04998b78-f7ba-44e0-9c84-ec450e95256d
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.