PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Wpływ dodatków stopowych do kąpieli na odporność korozyjną powłok cynkowych otrzymanych na stali zbrojeniowej

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
The effect of alloying bath additives on the corrosion resistance of zinc coatings obtained on reinforcing steel
Języki publikacji
PL
Abstrakty
PL
W artykule przedstawiono wyniki badań określające wpływ dodatku Bi i Sn do kąpieli cynkowej na odporność korozyjną powłok otrzymanych na stali zbrojeniowej. Powłoki do badań wytworzono na stali B500SP w kąpieli cynkowej zawierającej dodatki AlBi i AlBiSn. Odporność korozyjną powłok porównywano z odpornością korozyjną powłoki otrzymanej w kąpieli Zn-Al. Ujawniono mikrostrukturę oraz określono grubość powłok. Odporność korozyjną powłok określono porównawczo w standardowym teście korozyjnym w obojętnej mgle solnej. Badania w komorze solnej prowadzono zgodnie z normą PN- EN ISO 9227. Stwierdzono, że dodatek Bi oraz BiSn powodują obniżenieodporności korozyjnej powłok na stali zbrojeniowej B500SP.
EN
The article presents the results of research determining the effect of the bismuth and tin addition to the zinc bath on the corrosion resistance of coatings obtained on reinforcing steel. Coatings for research were made on B500SP steel in a zinc bath containing AlBi and AlBiSn additions. The corrosion resistance of the coatings was compared with the corrosion resistance of the coating obtained in the Zn-Al bath. The microstructure was revealed as well as the thickness of the coatings was determined. The corrosion resistance of the coatings was determined comparatively in a standard corrosion test in neutral salt spray. The tests in the salt chamber were carried out in accordance with the PN-EN ISO 9227 standard. It was found that the addition of bismuth and BiSn decrease the corrosion resistance of coatings on B500SP reinforcing steel.
Rocznik
Tom
Strony
137--143
Opis fizyczny
Bibliogr. 28 poz., rys., tab., wykr.
Twórcy
  • Politechnika Śląska, Gliwice, Wydział Inżynierii Materiałowej, 40-019 Katowice, Krasińskiego 8
autor
  • Remix S.A., 66-200 Świebodzin, Poznańska 36
autor
  • Politechnika Śląska, Gliwice, Wydział Inżynierii Materiałowej, 40-019 Katowice, Krasińskiego 8
Bibliografia
  • [1] ACI Committee 222. 2019. ACI 222R-19: Guide to Protection of Reinforcing Steel in Concrete against Corrosion. American Concrete Institute. Farmington Hills, Michigan, USA, ISBN: 978-1-64195-057-2.
  • [2] Andrade C., A. Macias. 1988. „Galvanized reinforcement in concrete”. In: Surface Coatings-2. Edited by Wilson D., Nicholson J.W., Prosser H.J. Elsevier Applied Science Publishers Ltd. London, New York : 137–182.
  • [3] Bautista Asuncion, Jose A. Gonzalez. 1996. „Analysis of the protective efficiency of galvanizing against corrosion of reinforcements embedded in chloride contaminated concrete”. Cement and Concrete Research, 26(2) : 215-224.
  • [4] Beguin P., M. Bosschaerts, D. Dhaussy, R. Pankert, M. Gilles. 2000. „Galveco a solution for galvanizing reactive steel”. Proceedings of 19th International Galvanizing Conference, Berlin: EGGA : paper 3 : 1-8.
  • [5] Grochoski Mauricio, Paulo Helene. 2008 „Siste mas de reparo para estruturas de concreto com corrosao de armaduras”. Boletim Tecnico da Escola Politecnica da USP, Departamento de Engenharia de Construcao Civil. Sao Paulo, Brasil. http://www.dcc.ufpr.br/mediawiki/images/3/3a/Heloisa_Campos_ Material_Complementar-2.pdf (dostęp: 2018)
  • [6] Huckshold Mark. 2009. „Improving design guidance to avoid cracking of galvanized structural steelwork”. Proceedings 22th International Galvanizing Conference, Madrid: EGGA : Session: Steel and Galvanizing, paper 3.
  • [7] Jaśniok Mariusz., Adam Zybura. 2007. „O przeciwkorozyjnym działaniu otuliny betonowej na zbrojenie. Zabezpieczenie i regeneracja zagrożonych korozją konstrukcji z betonu (cz. I)”. Przegląd Budowlany 78(1) : 20-25.
  • [8] Kania H., Sipa J. Microstructure characterization and corrosion resistance of zinc coating obtained on high-strength grade 10.9 bolts using a new thermal diffusion process. Materials, 12 (9), 2019, 1400; doi:10.3390/ ma12091400.
  • [9] Kania Henryk, Jacek Sipa, Mariola Saternus. 2019. „Zanurzeniowe powłoki aluminiowe na stali zbrojeniowej B500SP”. Ochrona przed korozją 62 (4) : 140-145.
  • [10] Kania Henryk, Jacek Sipa, Mariola Saternus. 2020. Struktura i kinetyka wzrostu powłok cynkowych na stali zbrojeniowej B500SP”. Ochrona przed korozją 63 (5) : 152-157.
  • [11] Kania Henryk, Piotr Liberski. 2012. „Synergistic influence of Al, Ni, Bi and Sn addition to a zinc bath upon growth kinetics and the structure of coatings”. IOP Conf. Series: Materials Science and Engineering 35 : No 012004.
  • [12] Kania Henryk, Piotr Liberski. 2014. „Synergistic Influence of the Addition of Al, Ni and Pb to a Zinc Bath upon Growth Kinetics and Structure of Coatings”. Solid State Phenomena 212 : 115-120.
  • [13] Lewis G.P., N. Pederson. 1996. „Optimizing the nickel-zinc process for hot dip galvanizing”. Proceedings of the 3rd Asian Pacific General Galvanizing Conference, Queensland, Australia.
  • [14] Liberski Piotr. 2013. Antykorozyjne powłoki zanurzeniowe, Gliwice: Wydawnictwo Politechniki Śląskiej.
  • [15] Mendala Jacek, Piotr Liberski. 2014. „Liquid metal embrittlement of steel with a coating obtained by batch hot dip method in a Zn + 2% Sn bath”. Solid State Phenomena, 212, 107-110.
  • [16] Mendala Jacek. 2012. „Liquid metal embrittlement of steel with galvanized coatings, IOP Conf. Ser.: Materials Science and Engineering, 35, No. 012002.
  • [17] Mendala Jacek. 2015. „The Possibility of the LME Phenomenon in Elements Subjected to Metallization in Zn Bath with Bi Addition, Solid State Phenomena, 226, 167-172.
  • [18] Pankert Roger. 2004. „In five years experience with the Galveco Alloy”. Proceedings of the 10th Hot Dip Galvanizing Conference, Krompachy Slovak Republic; Czech Galvanizers Association and Slovak Galvanizers Association : 18–26.
  • [19] PN-H-93220:2018-02. Stal do zbrojenia betonu. Spajalna stal zbrojeniowa B500SP. Pręty i walcowka żebrowana.
  • [20] Ramirez Estanislao V., Jose A. Gonzalez, Asuncion Bautista. 1996. „The protective efficiency of galvanizing against corrosion of steel in mortar and in Ca(OH)2 saturated solutions containing chlorides”. Cement and Concrete Research, 26(10) : 1525-1526.
  • [21] Reumont Guy, Pierre Perrot. 1997. „Fundamental Study of Lead Additions in Industrial Zinc”. Proceedings of 18th International Galvanizing Conference, Birmingham: EGGA : 1-7.
  • [22] Suliga Maciej, Radosław Wartacz. 2019. „The influence of the angle of working part of die on the zinc coating thickness and mechanical properties of medium carbon steel wires”. Archives of Metallurgy and Materials 64(4) : 1295-1299.
  • [23] Szymański Krzysztof, Bożena Szczucka-Lasota, Marek Gdesz. 2016. „Zastosowanie nowoczesnych metod natryskiwania cieplnego, jako klucz do uzyskania wysokich własności użytkowych powłok”. Ochrona przed Korozją 59(11) : 399-401.
  • [24] Tatarek Adam, Mariola Saternus. 2018. „Badanie zjawisk rozpuszczania dyfuzyjnego stali reaktywnych w kąpieli cynkowej z dodatkiem bizmutu”. Ochrona przed Korozją 7 : 186-190.
  • [25] Taylor M., S. Murphy S. 1997. „A decade of Technigalva”. Proceedings of the 18th International Galvanizing Conference Intergalva’97, Birmingham UK : EGGA.
  • [26] Verma Sanjeev Kumar, Sudhir Singh Bhadauria, Saleem Akhtar. 2014. „Monitoring corrosion of Steel bars in reinforced concrete structures”. The Scientific World Journal, article ID 957904, https://doi.org/10.1155/2014/957904.
  • [27] Yeomans Stephen Ross. 1994. „Performance of black, galvanized, and epoxy- coated reinforcing steel in chloridecontaminated concrete”. Corrosion 50(1) : 72-81.
  • [28] Yeomans Stephen Ross. 2002 „Galvanized Reinforcing Steel”. Corrosion Management 11 : 3-6.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-048832d1-0ea3-4f95-8952-42c8190c5b7c
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.