CMOS ECCCII with Linear Tune of Rx and Its Application to Current-Mode Multiplier

• Autorzy: Sakul C.

Identyfikatory

DOI

10.24425/123537

• Języki publikacji: EN

Abstrakty

EN

In this paper, the second-generation CMOS currentcontrolled-current-conveyor based on differential pair of operational transconductance amplifier has been researched and presented. Since the major improvement of its parasitic resistance at x-port can be linearly controlled by an input bias current, the proposed building block is then called “The Second-Generation Electronically-tunable Current-controlled Current Conveyor” (ECCCI). The applications are demonstrated in form of both 2 quadrant and 4 quadrant current-mode signal multiplier circuits. Characteristics of the proposed ECCCII and its application are simulated by the PSPICE program from which the results are proved to be in agreement with the theory.

Słowa kluczowe

EN

electronically tunable; CCCII; current mode; CMOS; linear

• Wydawca: Polish Academy of Sciences, Committee of Electronics and Telecommunication
• Czasopismo: International Journal of Electronics and Telecommunications
• Rocznik: 2018
• Tom: Vol. 64, No. 3
• Strony: 385--390
• Opis fizyczny: Bibliogr. 20 poz., rys., wykr.

Twórcy

autor

Sakul C.

• Faculty of Engineering and Technology, Dept. of Engineering, Rajamangala University of Technology Srivijaya, Trang Cams, Thailand

Bibliografia

• [1] K. C. Smith, A. Sedra, “The current conveyor-a new circuit building block,” in Proc. of IEEE, vol. 56, Issue.8, pp. 1368-1369, Aug. 1968.
• [2] A. Sedra, K. C. Smith, “A second-generation current conveyor and its application,” IEEE Trans on Circuit theory, vol.17, pp. 132-134, Feb. 1970.
• [3] A. Fabre, O. Saaid, F. Wiest and C. Boucheron, “Current controlled bandpass filter based on translinear conveyors,” ELECTRONICS LETTERS, vol. 37, no.1, pp. 1727-1728, Sep. 1995.
• [4] K. Kaewdang, W. Surakampontorn, “On the realization of electronically current-tunable CMOS OTA,” Int. J. Electron. Commun. (AEÜ), vol.61, pp. 300-306, 2007.
• [5] A. Fabre, O. Saaid and C. Boucheron, “High Frequency Applications Based on a New Current Controlled Conveyor,” IEEE Trans on circuits and systems, vol.43, no.2, pp. 82-91, Feb. 1996.
• [6] R. Chaisricharoen, B. Chipipop, B. Sirinaovakul, “CMOS CCCII: Structures, characteristics, considerations", Int. J. Electron. Commun. (AEÜ), vol.64, pp. 540-557, 2009.
• [7] W. Thitopakarn, R. Chaisricharoen, B. Chipipop and K. Higuchi, “Novel CMOS Current Controlled Current Conveyor Transconductance Amplifier (CCCCTA)". ISCIT 2010, pp.916-921, 2010.
• [8] S. Minaei, “BiCMOS realization of the second-generation current controlled conveyor (CCCII) and its application,” Proc. of Int. Symp. Sign. Circ. Syst. SCS2001, pp.421-424, 2001.
• [9] W. S. Chung, K.H. Kim, H.W. Cha, “A linear operational transconductance amplifier for instrumentation applications, IEEE Trans Instrum. Meas, pp.441-443, 1992.
• [10] S. Minaei, D. Kaymak, M. A. Ibrahim, K. Kuntman, “New CMOS configurations for current-controlled-convreyors (CCCIIs),” Proc of IEEE Conf. on Circuits and Systems for Communications (ICCSC), pp.62-65, Jun 2002.
• [11] T. Katoh, T. Tsukutani, Y. Sumi, Y. Fukui, “Electronically tunable current-mode universal filter employing CCCIIs and grounded capacitors,” Proc of the Int’l Symp. On Intelligent Signal Processing and Communications (ISPACS), pp.107-110, Dec. 2006.
• [12] Y. H. Xi, L. Liu, “A novel CMOS current controlled conveyor II and its applications,” Proc of the Int’l conf. on Intelligent Communication Technology and Automation (ICICTA), pp. 631-637, Oct. 2008.
• [13] H. Ercan, S. A. Tekin, M. Alci, “Voltage- and current-controlled high CMRR instrumentation amplifier using CMOS current conveyors,” Turk J Elec Eng & Comp Sci, vol.20, no.4, pp. 547-556, 2012.
• [14] S.J.G. Gift, B. Maundy, F. Muddeen, “High-performance current-mode instrumentation amplifier circuit”, International Journal of Electronics, vol. 94, pp. 1015-1024, 2007.
• [15] Y.H. Ghallab, W. Badawy, K.V.I.S. Kaler, B.J. Maundy, “A novel current-mode instrumentation amplifier based on operational floating current conveyor”, IEEE Trans on Instrum Meas, vol. 54, pp.1941-1949, 2005.
• [16] H. Ercan, M. Alci, “A new design for a BiCMOS controlled current conveyor,” Journal Electronics and Electrical Engineering, vol.19, pp. 56–60, 2013.
• [17] M. Kumngern, J. Chanwutitum, K. Dejhan, “Electronically tunable multiphase sinusoidal oscillator using translinear current conveyors,” Analog Integrated Circuits and Signal Processing, vol. 65, pp. 327-334, 2010.
• [18] M. Kumngern, W. Jongchanavawat, K. Dejhan, “New electronically tunable current-mode universal biquad filter using translinear current conveyors,” International Journal of Electronics, vol. 97, pp. 511-523, 2010.
• [19] N. A. Shah, M. F. Rather, S. Z. Iqbal, “SITO electronically tunable high output impedance current-mode universal filter,” Analog Integrated Circuits and Signal Processing, vol. 47, p. 335-338, 2006.
• [20] B. Razavi, “Design of analog CMOS integrated circuits,” McGraw Hill, Singapore, pp. 596-597, 2001.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).