Structural analysis of functionally graded material using sigmioadal and power law

• Autorzy: Abd-Ali Nabel Kadum , Madeh Ahmed Raee

Identyfikatory

DOI

10.29354/diag/144171

• Języki publikacji: EN

Abstrakty

EN

The stress-strain relations, displacement distribution, stress resultants and mid plane strain resultants of a functionally graded material plate are studied using Hamilton’s principle. A simply supported rectangular thick shell direct stress, inplane shear stress, transverse stress and displacement are investigated. The analysis and modeling of five layers FGM shell is carried out using MATLAB19 code with ABAQUS20 software. Using distinct materials on the top and bottom layers of the shell, a transverse uniform load in five degrees - of - freedom is applied with a specific Poisson's ratio and Young's modulus in a power and sigmoidal law function through the thickness direction. A power law was used to determine the distribution of properties through shell thickness. The results showed that the bottom layer affected significantly most stress due to subjected to the most in-plane stress while the displacement is greatest at the top layer.

Słowa kluczowe

EN

FGM shell; sigmoidal law; power law; Hamilton’s principle; stress analysis

PL

prawo sigmoidalne; zasada Hamiltona; analiza naprężeń

• Wydawca: Polskie Towarzystwo Diagnostyki Technicznej
• Czasopismo: Diagnostyka
• Rocznik: 2021
• Tom: Vol. 22, No. 4
• Strony: 59--65
• Opis fizyczny: Bibliogr. 29 poz., rys.

Twórcy

autor

Abd-Ali Nabel Kadum

• Mechanical Engineering Dep., College of Engineering, University of Al-Qadisiyha, Iraq

autor

Madeh Ahmed Raee

• College of Technical Engineering, The Islamic University, Najaf, Iraq Computer techniques Engineering Department

Bibliografia

• 1. Ramu I, Mohanty SC. Modal analysis of functionally graded material plates using finite element method. Procedia Materials Science. 2014; 6:460-467.
• 2. Bobbio LD, Otis RA, Borgonia JP, Dillon RP, Shapiro AA, Liu ZK, Beese AM. Additive manufacturing of a functionally graded material from Ti-6Al-4V to Invar: Experimental characterization and thermodynamic calculations. Acta Materialia. 2017; 127:133-142. https://doi.org/10.1016/j.actamat.2016.12.070.
• 3. Yamanouchi M, Koizumi M,Hirai T, Shiota I. Proc. First Int. Sympos. Functionally Gradient Materials. Japan, 1990.
• 4. Koizumi M. The concept of FGM, ceramic trans. Functionally Gradient Materials. 1993; 34.3-10.
• 5. Eltaher MA, Alshorbagy AE, Mahmoud FF. Determination of neutral axis position and its effect on natural frequencies of functionally graded macro/nanobeams. Composite Structures. 2013;99: 193-201. https://doi.org/10.1016/j.compstruct.2012.11.039.
• 6. Yin HM, Sun LZ, Paulino GH. Micromechanics-based elastic model for functionally graded materials with particle interactions. Acta Materialia. 2004;52(12): 3535-3543.
• 7. Chi SH, Chung YL. Mechanical behavior of functionally graded material plates under transverse load-Part I: Analysis. International Journal of Solids and Structures. 2006;43(13): 3657-3674.
• 8. Reddy JN, Chin CD. Thermomechanical analysis of functionally graded cylinders and plates. Journal of thermal stresses. 1998;21(6):593-626. https://doi.org/10.1080/01495739808956165.
• 9. Dorduncu M. Stress analysis of sandwich plates with functionally graded cores using peridynamic differential operator and refined zigzag theory. ThinWalled Structures. 2020;146:106468. https://doi.org/10.1016/j.tws.2019.106468.
• 10. Ke LL, Yang J, Kitipornchai S. Nonlinear free vibration of functionally graded carbon nanotubereinforced composite beams. Composite Structures. 2010;92(3):676-683. https://doi.org/10.1016/j.compstruct.2009.09.024.
• 11. Burlayenko VN, Sadowski T. Free vibrations and static analysis of functionally graded sandwich plates with three-dimensional finite elements. Meccanica. 2020;55(4):815-832. https://doi.org/10.1007/s11012- 019-01001-7.
• 12. Alshorbagy AE, Eltaher MA, Mahmoud FF. Free vibration characteristics of a functionally graded beam by finite element method. Applied Mathematical Modelling. 2011;35(1):412-425. https://doi.org/10.1016/j.apm.2010.07.006.
• 13. Boğa C, Selek O. Stress Analysis of Functionally Graded Beams Due to Thermal Loading. Journal of Engineering Science and Technology. 2020;15(1): 054-065.
• 14. Pradhan P, Sutar MK, Pattnaik S. A state of the art in functionally graded materials and their analysis. Materials Today: Proceedings. 2019;18:3931-3936. https://doi.org/10.1016/j.matpr.2019.07.333.
• 15. Chen D, Yang J, Kitipornchai S. Buckling and bending analyses of a novel functionally graded porous plate using Chebyshev-Ritz method. Archives of Civil and Mechanical Engineering. 2019;19(1)157-170. https://doi.org/10.1016/j.acme.2018.09.004.
• 16. Gilewski W, Pełczyński J. Material-oriented shape functions for FGM plate finite element formulation. Materials. 2020;13(3):803. https://doi.org/10.3390/ma13030803.
• 17. Afshin A, Nejad MZ, Dastani K. Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions. Journal of Computational Applied Mechanics. 2017;48(1):15-26. https://doi.org/10.22059/jcamech.2017.233643.144.
• 18. Benyamina AB, Bouderba B, Saoula A. Bending response of composite material plates with specific properties, case of a typical FGM “ceramic/metal” in thermal environments. Periodica Polytechnica Civil Engineering. 2018;62(4):930-938.
• 19. Chen Y, Jin G, Zhang C, Ye T, Xue Y. Thermal vibration of FGM beams with general boundary conditions using a higher-order shear deformation theory. Composites Part B: Engineering. 2018;153: 376-386. https://doi.org/10.1016/j.compositesb.2018.08.111.
• 20. El-Megharbel A. A theoretical analysis of functionally graded beam under thermal loading. World Journal of Engineering and Technology. 2016; 4(3):437-449. https://doi.org/10.4236/wjet.2016.43044.
• 21. Evran S. Bending stress analysis of axially layered functionally graded beams. Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi. 2018; 7(1):390-398. https://doi.org/10.28948/ngumuh.387230.
• 22. Ashrafi HR, Beiranvand P, Aghaei MZ, Jalili DD. Modal Analysis of FGM Plates (Sus304/Al2O3) Using FEM. Bioceram Dev Appl, 2018;8(112):2. https://doi.org/10.4172/2090-5025.1000112.
• 23. Abd-Ali NK, Farhan MM, Hassan NY. Improvement of mechanical properties of the rubbery part in cement packing system using new rubber materials. Journal of Engineering Science and Technology. 2021; 16(2): 1601-1613.
• 24. Abd-Ali NK, The effect of cure activator zinc oxide nanoparticles on the mechanical behavior of polyisoprene rubber. Journal of Engineering Science and Technology. 2020;15(3):2051-2061.
• 25. Abd-Ali NK, Madeh AR, Experimental and numerical investigation of factors that affecting in frictional welding of mild steel and Al alloy A356, ICOASE 2018 - International Conference on Advanced Science and Engineering. 2018:456-461.
• 26. Ali NKA. A new reinforcement material for rubber compounds (Sediment dust nanoparticles and white ceminte). 1st International Scientific Conference of Engineering Sciences - 3rd Scientific Conference of Engineering Science, ISCES 2018 - Proceedings. 2018:163-168.
• 27. Farhan MM, Abd-Ali NK, Hassan NY. Development the performance of the rubbery discharge part in flexopump system. Journal of Engineering and Applied Sciences. 2018;13(24):10148-10157.
• 28. Madeh AR, Majeed WI. Effect of boundary conditions on thermal buckling of laminated composite shallow shell. Materials Today: Proceedings. 2021;42:2397-2404. https://doi.org/10.1016/j.matpr.2020.12.501.
• 29. Fatoni NF, Park WR, Kwon OH. Mechanical property evaluation of functionally graded materials using twoscale modeling. Journal of the Korean Society of Marine Engineering. 2017;41(5):431-438.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).