PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The influence of efficiency of the cooling system on the thermodynamic parameters and performance of a two - stage VC 20.96 reciprocating compressor designed to serve as a marine engine starter

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper presents results of the research related to the analysis of the thermodynamic and flow processes occurring in a prototype VC 20.96 two-stage liquid-cooled reciprocating compressor. The compressor has been developed and manufactured by H. Cegielski Poznan metal works in collaboration with the Poznan University of Technology. The research related to the VC compressor was realized within the KBN 3127/C.T07-6/2002 project titled “Development of design of type-series of reciprocating compressors and their implementation in production”. The basic task of the project was to develop two type-series of liquid- and air- cooled reciprocating compressors of the V- and W- arrangement, designed to serve as marine engine starters. The result of the design work was the manufacturing of two compressors: the VC 20.96 liquid-cooled compressor and the WP 18.80 air-cooled one. The main aim of the research described in this paper was to evaluate the efficiency of the cooling system which uses inter-coolers integrated with the compressing stages and the cooperation of the compressing stages in terms of pressure ratio distribution. Owing to the cooling method, the applied design assumptions enabled to develop a compact compressor fulfilling the assumed operating parameters.
Rocznik
Tom
Strony
25--33
Opis fizyczny
Bibliogr. 4 poz., rys.
Twórcy
autor
  • Poznan University of Technology Piotrowa 3 60-965 Poznan, POLAND
Bibliografia
  • 1. Hagel R., Zakrzewski J.: Dynamic metrology (in Polish). WNT,Warszawa 1984
  • 2. Fodemski T. et al.: Thermal measurements (in Polish). WNT, Warszawa 2001
  • 3. Walczak J., Tyrcha J., Grzelczak M.: Elaboration of construction of series of types of special purpose piston compressors and putting it into production (in Polish). Report No. KBN 3127/ C.T07-6/2002
  • 4. Wiśniewski S., Wiśniewski T. S.: Heat exchange (in Polish). WNT, Warszawa 2000.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-03f1cb06-68ae-4c5b-93db-de16b69de967
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.