Investigation of the Influence of Process Parameters on Shape Deviation after Wire Electrical Discharge Machining

• Autorzy: Świercz R. , Oniszczuk-Świercz D. , Zawora J. , Marczak M.

Identyfikatory

DOI

10.24425/amm.2019.130113

• Języki publikacji: EN

Abstrakty

EN

New materials require the use of advanced technology in manufacturing parts of complex shape. One of the modern non-conventional technology of manufacturing difficult to cut materials is the wire electrical discharge machining (WEDM). The article presents the results of theoretical and experimental research in the influence of the WEDM conditions and parameters on the shape deviation during a rough cut. A numerical model of the dielectric flow in the gap (ANSYS) was developed. The influence of the dielectric velocity field in the gap on the debris evacuation and stability of WEDM process was discussed. Furthermore, response surface methodology (RSM) was used to build empirical models for influence of the wire speed V_d, wire tension force F_n, the volume flow rate of the dielectric Q_v on the flatness deviation after the WEDM.

Słowa kluczowe

EN

wire electrical discharge machining; WEDM; shape deviation; CFD

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 4
• Strony: 1457--1462
• Opis fizyczny: Bibliogr. 32 poz., fot., rys., tab., wzory

Twórcy

autor

Świercz R.

• Warsaw University of Technology, Institiute of Manufacturing Technology, 222 Niepodległości Str., 00-663, Warszawa, Poland

autor

Oniszczuk-Świercz D.

• Warsaw University of Technology, Institiute of Manufacturing Technology, 222 Niepodległości Str., 00-663, Warszawa, Poland

autor

Zawora J.

• Warsaw University of Technology, Institiute of Manufacturing Technology, 222 Niepodległości Str., 00-663, Warszawa, Poland

autor

Marczak M.

• Warsaw University of Technology, Institiute of Manufacturing Technology, 222 Niepodległości Str., 00-663, Warszawa, Poland

Bibliografia

• [1] J. Wang, F. Han, G. Cheng, F. Zhao, Int. J. Mach. Tools Manuf. 11 (2012), DOI: 10.1016/j.ijmachtools.2012.02.004.
• [2] J. W. Murray, J. Sun, D. V. Patil, T. A. Wood, A. T. Clare, J. Mater. Process. Technol. 229, 54 (2016), DOI: 10.1016/j.jmatprotec.2015.09.019.
• [3] J. Kozak, M. Rozenek, L. Dabrowski, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 217, 1597 (2003), DOI: 10.1243/095440503771909971.
• [4] R. Świercz, D. Oniszczuk-Świercz, Nanomaterials 9 (3), 335, (2019), DOI: 10.3390/nano9030335.
• [5] R. Świercz, D. Oniszczuk-Świercz, Materials 12, 943 (2019), DOI: 10.3390/ma12060943
• [6] H. Marashi, D. M. Jafarlou, A.A.D. Sarhan, M. Hamdi, Precision Engineering 46, 11 (2016), DOI: 10.1016/j.precisioneng.2016.05.010.
• [7] S. N. Grigoriev, M. P. Kozochkin, A. N. Porvatov, M. A. Volosova, A. A. Okunkova, Heliyon 5, 10 (2019), DOI: 10.1016/j.heliyon.2019.e02629.
• [8] R. Świercz, D. Oniszczuk-Świercz, L. Dąbrowski, Archive of Mechanical Engineering 65, 4 (2018), DOI: 10.24425/ame.2018.125437.
• [9] W. X. Li, F. Yan, J. Ma, Z. Chen, X. Wen, Y. Cao, Mathematical Biosciences and Engineering 16, 5 (2019), DOI: 10.3934/mbe.2019289.
• [10] S. Skoczypiec, A. Ruszaj, Precision Engineering 38, 680 (2014), DOI: 10.1016/j.precisioneng.2014.03.007.
• [11] H. Bisaria, P. Shandilya, Mater. Manuf. Process. 1 (2019), DOI: 10.1080/10426914.2019.1594264.
• [12] R. Świercz, D. Oniszczuk-Świercz, T. Chmielewski, Micromachines 10 (1), 72 (2019), DOI: 10.3390/mi10010072
• [13] A. Conde, A. Arriandiaga, J. A. Sanchez, E. Portillo, S. Plaza, I. Cabanes, Robot. Cim-Int. Manuf. 49, 24 (2018), DOI: 10.1016/j.rcim.2017.05.010.
• [14] K. Ishfaq, N. Ahmed, N. A. Mufti, S. Pervaiz, Int. J. Adv. Manuf. Technol. 102, 1659 (2019), DOI: 10.1007/s00170-019-03301-4.
• [15] H. Kumar, A. Manna, R. Kumar, J. Braz. Soc. Mech. Sci. Eng. 40, 458 (2018), DOI: 10.1007/s40430-018-1368-1.
• [16] M. Ziętala, T. Durejko, M. Łazińska, Arch. Metall. Mater. 60, 2447 (2015), DOI: 10.1515/amm-2015-0398.
• [17] Z. Chen, G. Zhang, H. Yan, Precision Engineering 54, 51 (2018), DOI: 10.1016/j.precisioneng.2018.05.001.
• [18] T. Kamei, A. Okada, Y. Okamoto, Procedia CIRP 42, 596 (2016), DOI: 10.1016/j.procir.2016.02.266.
• [19] A. Okada, T. Konishi, Y. Okamoto, H. Kurihara, CIRP Annals 64, 233 (2015), DOI: 10.1016/j.cirp.2015.04.034.
• [20] R. Ferreira, J. Řehoř, C. H. Lauro, D. Carou, J. P. Davim, J. Braz. Soc. Mech. Sci. Eng. 38, 8 (2016), DOI: 10.1007/s40430-016-0504-z.
• [21] G. Zhang, H. Li, Z. Zhang, W. Ming, N. Wang, Y. Huang, Mach. Sci. Technol. 20, 173 (2016), DOI: 10.1080/10910344.2015.1085312.
• [22] M. P. Garg A. Sharma, Composites Communications 6 (2017). DOI: 10.1016/j.coco.2017.07.002.
• [23] T. Ebisu, A. Kawata, Y. Okamoto, A. Okada, H. Kurihara, Procedia CIRP 68, 104 (2018), DOI: 10.1016/j.procir.2017.12.031
• [24] D. Bańkowski, S. Spadło, Archives of Foundry Engineering 17, 1 (2017), DOI: 10.1515/afe-2017-0031.
• [25] M. Gombár, A. Vagaská, M. Harničárová, J. Valíček, M. Kušnerová, A. Czán, J. Kmec, Coatings 9 (2019), DOI: 10.3390/coat-ings9010057.
• [26] Spadło S., W. Depczyński, P. Młynarczyk. Metalurgija 56 (2017).
• [27] I. Vilček, J. Řehoř, D. Carou, P. Zeman, Robot. Comput.-Integr. Manuf. 47 (2015), DOI: 10.1016/j.rcim.2016.10.001.
• [28] H. Abyar, A. Abdullah, A. A. Shafaroud, Mach. Sci. Technol. 0, 1 (2019), DOI: 10.1080/10910344.2019.1575410.
• [29] S. Habib A. Okada, Int. J. Adv. Manuf. Technol. 84, 2265 (2016), DOI: 10.1007/s00170-015-7818-3.
• [30] G. Puthumana, Archive of Mechanical Engineering 64, 149 (2017), DOI: 10.1515/meceng-2017-0009. DOI:10.1515/meceng-2017-0009.
• [31] G. Zhang, H. Huang, Z. Zhang, Y. Zhang, Int. J. Adv. Manuf. Technol. 100, 2089 (2019), DOI: 10.1007/s00170-018-2796-x.
• [32] J. Zheng, X. Lai, X. Zhou, A. Chen, W. Zheng, Int. J. Precis. Eng. Manuf. 20, 853 (2019), DOI: 10.1007/s12541-019-00107-y.