Archives of Metallurgy and Materials - Tom Vol. 68, iss. 2 (2023) - BazTech - Yadda

Tom - szczegóły

Tytuł artykułu

Vol. 68, iss. 2

Czasopismo

Archives of Metallurgy and Materials

Wydawca

Institute of Metallurgy and Materials Science of Polish Academy of Sciences
Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences

Rocznik

2023

Identyfikatory

Zawartość wolumenu

Vol. 68, iss. 2
- artykuł: Effect of Physico-Chemical Properties of Submerged Arc Welding Fluxes on Pipeline Steel - A Brief Review (Sharma Lochan, Chhibber Rahul), s. 409-421
- artykuł: To Study the Microstructural Evolution of EN353 Steel under Different Heat Treatment Conditions (Sharma Lochan, Chaubey Sandeep Kumar), s. 423--430
- artykuł: Gas Nitriding of the Near-Beta-Titanium Alloy (Luk’yanenko Alexander G., Pohrelyuk Iryna M., Fedirko Viktor M., Molyar A. G., Trush Vasyl, Kravchyshyn T. M.), s. 431--438
- artykuł: The Influence of Changes in Roll Pass Design on the State of Residual Stresses in Railway Rails - Summary (Żak Sylwester, Woźniak Dariusz), s. 439--446
- artykuł: Effects of Y2O3 on Microstructure and Corrosion Properties of Laser Cladding Composite Coatings on 304 Stainless Steel Substrate (Yu Jinling, Zhentai Zheng, Li Shuai, Guo Donghui, Chang Liang), s. 447--453
- artykuł: Influence of a Directional Dependenceon Mechanical Properties of Composites Reinforced with Chopped Carbon Fibre Produced by Additive Manufacturing (Majko Jaroslav, Handrik Marian, Vaško Milan, Sága Milan, Kopas Peter, Dorčiak Filip, Sapietová Alžbeta), s. 455--461
- artykuł: Acoustic Emission and Infrared Thermography Study of Low Strain Tensile Behaviour of AISI 304L Stainless Steel (Sapietová Alžbeta, Raček Marek, Dekýš Vladimir, Sapieta Milan, Sága Milan, Šofer Pavel), s. 463--468
- artykuł: Analysis of Tilted Columnar Dendrites at Grain Boundaries During Wire and Laser Additive Manufacturing: a Phase-Field Study (Zong Nanfu, Sun Weizhao, Liang Xinghong, Jing Tao), s. 469--475
- artykuł: Modification of Surface Morphology and Surface Properties of Copper-Nickel Alloy by Anodic Treatment in a Deep Eutectic Solvent (Ethaline) (Protsenko Vyacheslav, Butyrina Tatyana, Makhota Dmytro, Korniy Sergiy, Danilov Felix), s. 477--482
- artykuł: Fluorine-Doped SnO2 Thin Films in Solar Cell Applications. Morphological, Optical and Electrical Properties (Lisnic Petru, Hrostea Laura, Leontie Liviu, Girtan Mihaela), s. 483--490
- artykuł: Preliminary Structures Assessment of Some TRIP Steels (Pantilimon Mircea Cristian, Berbecaru Andrei-Constantin, Coman George, Sohaciu Mirela G., Dumitrescu Ruxandra Elena, Ciucă Sorin, Gherghescu Ioana-Arina, Predescu Cristian), s. 491--498
- artykuł: The Effects of Friction Stir Welding Parameters on Microstructure, Fatigue Life and Tensile Properties of Aluminum 2024-T3 Alloy (Şık Aydın, Özer Alpay), s. 499--505
- artykuł: Influence of Surface Roughness on the High Temperature / High Strain Low Cycle Fatigue Behavior of Nickel-Based Superalloy Rene®80 (Barjesteh Mohammad Mehdi), s. 507--516
- artykuł: Investigation of Self-Hardening AlZn10Si8Mg Cast Alloy for the Automotive Industry (Kuchariková Lenka, Pastierovičová Lucia, Tillová Eva, Chalupová Mária, Závodská D.), s. 517--524
- artykuł: Identification of Data Affected by Aberrant Errors in the Study of the Milling Process on Aluminum Alloys (Țîțu Aurel Mihail, Pop Alina Bianca), s. 525--530
- artykuł: Study on Corrosion Behavior of Q235 Steel and 16Mn Steel by Electrochemical and Weight Loss Method (Quan Bianli, Xie Zhiping), s. 531--540
- artykuł: A Comparative Study on Ballistic Behaviour of MWCNT / Graphene Reinforced AL6061 Surface Composites Fabricated Via Friction Stir Processing (Magarajan U., Suresh Kumar S.), s. 541--550
- artykuł: Machining Investigations of Squeeze Cast TiB2/Al 7075 Composites through EDM: Regression Modelling and Weighted Principal Component Analysis (Pradhan Rahul Chandra, Das Diptikanta, Sahoo Barada Prasanna, Rout Chiranjeeb, Panda Akash, Barla Evangelin), s. 551--562
- artykuł: Fatigue Resistance and Other Utility Properties of NiMn-Type of Austenitic Nodular Cast Iron (Vaško Alan, Uhríčik Milan, Kaňa Václav), s. 563--569
- artykuł: Effect of Surface Chemical Treatment of Himalayan Nettle and Investigation of Surface, Physical and Mechanical Characteristics in Treated Nettle Fibre (Deepa R., Kumaresan K., Saravanan K.), s. 571--578
- artykuł: Growth Law for Columnar Structure within the Copper and Copper Alloys Solidifying at a High Peclet Number (Kwapisiński Piotr, Wołczyński Waldemar), s. 579--584
- artykuł: Study on Tensile Properties and Microstructures of Different Sites in Al-Si Alloy Casting Component (Tao Jianquan, Xiang Lin, Chen Xidong, Sun Jipeng, Wang Yanbin, Du Chuanhang, Peng Feifei, Gao Shiqing, Chen Qiang), s. 585--589
- artykuł: Preparation Process of Coating Interlayer and the Performance of EH40/2205-Clad Plate with Interlayer (Feng K.K., Yi Yali, Qin Y., Jin Herong R.), s. 591--598
- artykuł: Optimization of GTAW Process Parameters of Dissimilar Al-Mg Alloys for Enhanced Joint Strength - Taguchi Approach (Antony Prabu D., Jayakumar K.S., Madhavan Pillai Elangovan, Kumaresan G.), s. 599--606
- artykuł: Effect of Operating Conditions on the Tribological Behavior of Zn-30Al-3Cu Bearing Alloy (Savaşkan Temel, Tan Hasan Onur), s. 607--616
- artykuł: Characterization of Microwave Sintered Aluminium Composite Reinforced with Hydroxyapatite Extracted from Rihu Fish Scales (Venkatesh V.S.S., Prasad Kalapala, Deoghare Ashish B.), s. 617--624
- artykuł: A Study on the Influence of Reinforcement Volume on AA5083/(SiC-Gr) Hybrid Surface Composite Developed by Friction Stir Processing (Bharti Shalok, Ghetiya Nilesh D., Patel Kaushik M., Saxena Kuldeep K.), s. 625--629
- artykuł: The Influence of Sintering Temperature on the Microstructure of Coal-Ash Based Geopolymers (Burduhos-Nergis Dumitru Doru, Vizureanu Petrica, Achitei Dragos C., Sandu Andrei Victor, Burduhos-Nergis Diana Petronela, Abdullah Mohd Mustafa Al Bakri), s. 631--637
- artykuł: Microstructure and Properties Evaluation of Ductile Cast Iron Subjected to Hot Plastic Deformation and Ambient Temperature Compression (Chaus Alexander S., Čaplovič Ľubomír, Pokrovskii Artur I., Sobota Robert), s. 639--648
- artykuł: Effect of Cooling Rates and Intermediate Slab Blank Thickness on the Microstructure and Mechanical Properties of the X70 Pipeline Steel (Xu Haijian, Han Chufei, Yan Pingyuan, Zhao Baochun, Li Weijuan), s. 649--658
- artykuł: Effects of Welding Heat Input on Microstructure and Corrosion Characterization in CGHAZ of X80 Pipeline Steel (Wang Xue-Mei, Zhao Wei, Chen Kai, Li Zhen), s. 659--671
- artykuł: Impact of Coolant Water Flow Rate and Temperature Underside Cooling Slope on Solidification with Microstructure and Mechanical Properties of Casted AZ91 Mg Alloy (Sahu Sambeet, Kund Nirmal), s. 673--680
- artykuł: Influence of Aging Time at 850°C on Microstructure and Corrosion Resistance of a Cold Rolled 2205 Duplex Stainless Steel (Assumpção Raphael França, Fortes Monteiro Jessica C., Campideli Victor Cardoso, Santos Dagoberto, Sicupira Dalila C.), s. 681--688
- artykuł: Numerical Modelling of Phase Diagrams of Copper Alloys for Optimization of Semi-Solid Forming (Madetko Arkadiusz, Sołek Krzysztof, Drożdż Paweł), s. 689--696
- artykuł: Multi Wedge Cross Rolling of Axle Forgings (Bulzak Tomasz), s. 697--701
- artykuł: The Application of Fuzzy Logic Analysis for the Fast Calculations of Proper Parameters of Manufacturing Titanium Alloys from Powders (Zyguła Krystian, Wojtaszek Marek), s. 703--710
- artykuł: Effect of the Heating Temperature of a Nickel-Chromium Steel Charge Material on the Stability of the Forging Process and the Durability of the Die (Hawryluk Marek R., Lachowicz Marzena, Janik Marta, Gronostajski Zbigniew, Stachowicz Mateusz), s. 711--722
- artykuł: Fast Estimation of Favorable Parameters of Hot Metal Forming, Using the Fuzzy Logic Method (Wojtaszek Marek, Zyguła Krystian), s. 723--731
- artykuł: Statistical Analysis of Properties of Technological Charge and Manufacturing Tolerance of Thin-Walled Sections in Process of Multi-Workstations Roller Bending (Tracz P., Wacławiak Krzysztof, Chrapoński Jacek, Popiel R.), s. 733--740
- artykuł: Simulation of Hot Continuous Rolling of a Plain Carbon Steel Using the MAXStrain II® Multi-Axis Deformation System (Schindler Ivo, Kawulok Petr, Konečná Kateřina, Sauer Michal, Navrátil Horymír, Opěla Petr, Kawulok Rostislav, Rusz Stanislav), s. 741--747
- artykuł: Microstructure, Mechanical Properties and Corrosion Behavior of Zr-Containing AlSi5Cu2Mg Alloy (Bolibruchová Dana, Širanec Lukáš, Kajánek Daniel, Chalupová Mária), s. 749--756
- artykuł: Technology of Production of Mold Filling Material for Specific Purposes in the Field of Metallic Foam Casting (Kroupová Ivana, Bašistová Martina, Lichý Petr, Merta Václav, Radkovský Filip, Jezierski Jan), s. 757--763
- artykuł: Influence of Aluminium and Silicon Content on the Phase Composition, Microstructure and Magnetic and Mechanical Properties of Multicomponent FeNiCoAlSi Alloys (Kurowski Bernard, Oleszak Dariusz), s. 765--768
- artykuł: TIG Welding of Ti6Al4V: Effect of Ti6Al4V ELI as Filler Metal (Omoniyi Peter O., Mahamood Rasheedat. M., Adeleke Adekunle A., Ikubanni Peter P., Akinlabi Stephen A., Akinlabi Esther Titilayo), s. 769--773
- artykuł: Optimization of T-6 cycle and Characterization of Si3N4 Reinforced High Strength Aluminum Metal Matrix Composites (Kumar Ashish, Rana Ravindra Singh, Purohit Rajesh, Namdev Anurag), s. 775--783
- artykuł: Properties and Morphology of Fly Ash Based Alkali Activated Material (AAM) Paste Under Steam Curing Condition (Razak Rafiza Abd, Izman Sharifah Nur Syamimi Syed, Abdullah Mohd Mustafa Al Bakri, Yahya Zarina, Abdullah Alida, Mohamed Rosnita), s. 785--789
- artykuł: Fabrication and Characterization of Al6061-Nano Al2O3 Composites by Ultrasonic Assisted Stir Casting followed by Heat Treatment and Hot Forging (Purohit Rajesh, Qureshi M.M.U., Kumar Ashish, Mishra Abhishek, Rana R.S.), s. 791--798
- artykuł: Susceptor-Assisted Rapid Microwave Sintering of Al-Kaolin Composite in a Single-Mode Cavity (Venkatesh V.S.S., Kumar Sunil, Patnaik Lokeswar), s. 799--806
- artykuł: Evolution and Characterization of Zirconium 702 alloy at various temperatures (Lade Jayahari, Dharavath Baloji, Badrish Anand, Kosaraju Satyanarayana, Singh Swadesh Kumar, Saxena Kuldeep Kumar), s. 807--812
- artykuł: The Effect of Different Conditions on the Tensile Properties of AA7075-T6 During the Friction Stir Welding Process (Sharma Akash, Dwivedi Vijay Kumar, Singh Yesh Pal), s. 813--821
- artykuł: Fabrication and Different Characterization of Graphene Nano Platelets Reinforced Epoxy Nano Composites (Namdev Anurag, Purohit R., Telang A., Kumar A.), s. 823--832

rozwiń roczniki

JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.