PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Modified Graphite with Tin Oxide as a Promising Electrode for Reduction of Organic Pollutants from Wastewater by Sonoelectrochemical Oxidation

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Most of the studies on tin oxide coatings as electrode materials were conducted on titanium; in this study, the aim was to create pure tin oxide (SnO2) films on graphite substrate, which is more prevalent than titanium. There is a lack in investigation the effect of SnCl2 and HNO3 concentrations on the prepared SnO2 electrode; therefore, the aim of this work was to study these effects precisely. Also, no previous study investigated the removal of phenol sonoelectrochemically by a SnO2 electrode, which would be accomplished in the present work. The tin dioxide electrode was produced by cathodic electrodeposition using a SnCl2·2H2O solution in the presence of HNO3 and NaNO3 on a graphite plate substrate. The impact of various operating parameters (current density – CD, HNO3 concentration, and SnCl2·2H2O concentration) on the morphology and structure of the SnO2 deposit layer was thoroughly investigated. The physical structures of the SnO2 film were determined by X‐ray diffraction (XRD), surface morphology was characterized using field-emission scanning electron microscopy (SEM), and chemical composition was analyzed using energy-dispersive X-ray spectroscopy (EDX). In a batch reactor, the sonoelectrochemical oxidation of phenol was tested to determine the performance of the best SnO2 electrodes for phenol degradation and any organic byproducts. It was discovered that 10 mA/cm2 , 50 mM of SnCL2·2H2O, and 250 mM of HNO3 were the optimum conditions to prepare SnO2 electrodes, which produced the smallest crystal size, with no appeared cracks, and gave the best phenol removal. The best prepared electrode was tested in the sonoelectrochemical oxidation of phenol with two different electrolytes and different CD, and the results showed that the phenol removal was 76.87% and 64.68% when using NaCl and Na2SO4, respectively, as well as was 63.39, 76.87, and 100% for CD at 10, 25, and 40 mA/cm2, respectively.
Twórcy
  • Department of Chemical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq
  • Department of Chemical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq
Bibliografia
  • 1. Abbas A.S., Hafiz M.H., Salman R.H., 2016. Indirect electrochemical oxidation of phenol using rotating cylinder reactor. Iraqi Journal of Chemical and Petroleum Engineering., 17, 43–55.
  • 2. Abbas R.N., Abbas A.S., 2022. Kinetics and energetic parameters study of phenol removal from aqueous solution by electro-fenton advanced oxidation using modified electrodes with PbO2 and graphene. Iraqi Journal of Chemical and Petroleum Engineering., 23, 1–8.
  • 3. Abbas Z.I., Abbas A.S., 2021. Optimization of the electro-fenton process for cod reduction from refinery wastewater. Environmental Engineering and Management Journal., 19, 2029–2037.
  • 4. Abdo H.S., Sarkar A., Gupta M., Sahoo S., Mohammed J.A., Ragab S.A., Seikh A.H., 2021. Low‐cost high‐performance sno2–cu electrodes for use in direct ethanol fuel cells. Crystals., 11, 1–12.
  • 5. Ahmed Y.A., Salman R.H., 2023. Simultaneous electrodeposition of multicomponent of Mn–Co–Ni oxides electrodes for phenol removal by anodic oxidation. Case Studies in Chemical and Environmental Engineering., 8.
  • 6. Al-Alawy A.F., Al-Ameri M K., 2017. Treatment of simulated oily wastewater by ultrafiltration and nanofiltration processes. Iraqi Journal of Chemical and Petroleum Engineering., 18, 71–85.
  • 7. Al-Jandeel H.A.K., 2013. Removal of phenolic compounds from aqueous solution by using agricultural waste (Al-Khriet). Iraqi Journal of Chemical and Petroleum Engineering., 14, 55–62.
  • 8. Al-Obaidy A., 2013. Removal of phenol compounds from aqueous solution using coated sand filter media. Iraqi Journal of Chemical and Petroleum Engineering., 14, 23–31.
  • 9. Ang W.L., McHugh P.J., Symes M.D., 2022. Sonoelectrochemical processes for the degradation of persistent organic pollutants. Chemical Engineering Journal., 444.
  • 10. Arote S.A., Tabhane V., Gunjal S.D., Mohite K.C., Pathan H., 2015. Structural and optical properties of electrodeposited porous SnO2 films: Effect of applied potential and post deposition annealing treatment. Macromolecular Symposia. Wiley-VCH Verlag, Vol. 347pp. 75–80.
  • 11. Chen J.Y., Chueh C.C., Zhu Z., Chen W.C., Jen A.K.Y., 2017. Low-temperature electrodeposited crystalline SnO2 as an efficient electron-transporting layer for conventional perovskite solar cells. Solar Energy Materials and Solar Cells., 164, 47–55.
  • 12. Chen X., Liang J., Zhou Z., Duan H., Li B., Yang Q., 2010. The preparation of SnO2 film by electrodeposition. Materials Research Bulletin., 45, 2006–2011.
  • 13. Daideche K., Azizi A., 2017a. Electrodeposition of tin oxide thin film from nitric acid solution: The role of pH. Journal of Materials Science: Materials in Electronics., 28, 8051–8060.
  • 14. Daideche K., Azizi A., 2017b. Electrodeposition of tin oxide thin film from nitric acid solution: The role of pH. Journal of Materials Science: Materials in Electronics., 28, 8051–8060.
  • 15. Daideche K., Azizi A., 2017c. Electrodeposition of tin oxide thin film from nitric acid solution: The role of pH. Journal of Materials Science: Materials in Electronics., 28, 8051–8060.
  • 16. Divya N., Sreerag A.V, Yadukrishna J.T., Soloman P.A., 2021. A study on electrochemical oxidationof phenol for wastewater remediation. IOP Conference Series: Materials Science and Engineering. IOP Publishing, Vol. 1114.
  • 17. Fajri N.R., Mohammed R.N., 2023. Removal of organic pollutants from wastewater using different oxidation strategies. Journal of Ecological Engineering., 24, 351–359.
  • 18. Hamad H.T., 2021. Removal of phenol and inorganic metals from wastewater using activated ceramic. Journal of King Saud University - Engineering Sciences., 33, 221–226.
  • 19. Hessam R., Najafisayar P., Rasouli S.S., 2022. A comparison between growth of direct and pulse current electrodeposited crystalline SnO2 films; electrochemical properties for application in lithium-ion batteries. Materials for Renewable and Sustainable Energy., 11, 259–266.
  • 20. Heydari Orojlou S., Rastegarzadeh S., Zargar B., 2022. Experimental and modeling analyses of COD removal from industrial wastewater using the TiO2–chitosan nanocomposites. Scientific Reports., 12.
  • 21. Kassob A.N., Abbar A.H., 2022. Treatment of petroleum refinery wastewater by graphite–graphite electro fenton system using batch recirculation electrochemical reactor. Journal of Ecological Engineering., 23, 291–303.
  • 22. Khan H., Yerramilli A.S., D’Oliveira A., Alford T.L., Boffito D.C., Patience G.S., 2020, June 1. Experimental methods in chemical engineering: X-ray diffraction spectroscopy—XRD. Canadian Journal of Chemical Engineering.
  • 23. Majeed N.S., 2017. Inverse fluidized bed for chromium ions removal from wastewater and produced water using peanut shells as adsorbent. 2017 International Conference on Environmental Impacts of the Oil and Gas Industries: Kurdistan Region of Iraq as a Case Study (EIOGI), Koya-Erbil, Iraq., 9–14.
  • 24. Mezaal D.K., 2019. Removal Of Parachlorophenol From Synthetic Waste Water Using Advanced Electrochemical Oxidation Process (M.Sc. Thesis). Al-Nahrain University, Baghdad.
  • 25. Naser G.F., Mohammed T.J., Abbar A.H., 2021. Treatment of Al-Muthanna petroleum refinery wastewater by electrocoagulation using a tubular batch electrochemical reactor. IOP Conference Series: Earth and Environmental Science. IOP Publishing Ltd, Vol. 779.
  • 26.Raj D.V., Ponpandian N., Mangalaraj D., Viswanathan C., 2015. Electrodeposition of macroporous SnO2 thin films and its electrochemical applications. Materials Focus., 4, 245–251.
  • 27. Salman R.H., Hafiz M.H., Abbas A.S., 2019. Preparation and characterization of graphite substrate manganese dioxide electrode for indirect electrochemical removal of phenol. Russian Journal of Electrochemistry., 55, 407–418.
  • 28. Santos D., Lopes A., Pacheco M.J., Gomes A., Ciríaco L., 2014. The oxygen evolution reaction at Sn-Sb oxide anodes: Influence of the oxide preparation mode. Journal of The Electrochemical Society., 161, H564–H572.
  • 29. Thokchom B., Pandit A.B., Qiu P., Park B., Choi J., Khim J., 2015. A review on sonoelectrochemical technology as an upcoming alternative for pollutant degradation. Ultrasonics Sonochemistry., 27, 210–234.
  • 30. Thwaini H.H., Salman R.H., 2023. Modification of electro-fenton process with granular activated carbon for phenol degradation – optimization by response surface methodology. Journal of Ecological Engineering., 24, 92–104.
  • 31. Xu L., Li M., Xu W., 2015. Preparation and characterization of Ti/SnO2-Sb electrode with copper nanorods for AR 73 removal. Electrochimica Acta., 166, 64–72.
  • 32. Zambrano J., Min B., 2019. Comparison on efficiency of electrochemical phenol oxidation in two different supporting electrolytes (NaCl and Na2SO4) using Pt/Ti electrode. Environmental Technology and Innovation., 15.
  • 33. Zhang M., Zhang Z., Liu S., Peng Y., Chen J., Yoo Ki S., 2020. Ultrasound-assisted electrochemical treatment for phenolic wastewater. Ultrasonics Sonochemistry., 65.
  • 34. Zhao W., Xing J., Chen D., Bai Z., Xia Y., 2015. Study on the performance of an improved Ti/SnO2-Sb2O3/PbO2 based on porous titanium substrate compared with planar titanium substrate. RSC Advances., 5, 26530–26539.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-03355e57-4283-4602-a455-2d64dbafb60b
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.