Post-impact residual torsional strength and acoustic emission analysis of filament wound composite pipes

Paczkowska, Karolina; Pacholec, Zuzanna; Szychta, Grzegorz; Błażejewski, Wojciech; Stabla, Paweł; Barcikowski, Michał

doi:10.14314/polimery.2025.l.4

Artykuł - szczegóły

Tytuł artykułu

Post-impact residual torsional strength and acoustic emission analysis of filament wound composite pipes

Autorzy

Paczkowska Karolina , Pacholec Zuzanna , Szychta Grzegorz , Błażejewski Wojciech , Stabla Paweł , Barcikowski Michał

Treść / Zawartość

Pełne teksty:

Pobierz

Identyfikatory

DOI

10.14314/polimery.2025.l.4

Warianty tytułu

Poudarowa wytrzymałość resztkowa na skręcanie i analiza emisji akustycznej nawijanych rur kompozytowych

Języki publikacji

Abstrakty

The residual torsional strength of composite pipes after different impact loading and torsional strength with acoustic emission analysis were investigated. It was shown that the residual torsional strength of composite pipes and the strength of undamaged samples differ significantly depending on the fiber winding angle. The undamaged pipes with a winding angle of 45° showed higher torsional strength compared with the samples with an angle of 30°.

Zbadano wytrzymałość resztkową na skręcanie rur kompozytowych po różnym obciążeniu udarowym oraz wytrzymałość na skręcanie z analizą emisji akustycznej. Wykazano, że wytrzymałość resztkowa rur kompozytowych na skręcanie oraz wytrzymałość próbek nieuszkodzonych różnią się znacznie w zależności od kąta nawijania włókien. Nieuszkodzone rury o kącie nawijania 45° wykazały większą wytrzymałość na skręcanie w porównaniu z próbkami o kącie nawijania 30°.

Słowa kluczowe

filament winding residual torsional strength acoustic emission composite pipes non-destructive tests

technologia nawijania wytrzymałość szczątkowa na skręcanie emisja akustyczna rury kompozytowe badania nieniszczące

Wydawca

Sieć Badawcza Łukasiewicz – Instytut Chemii Przemysłowej

Czasopismo

Polimery

Rocznik

2025

Tom

Vol. 70, nr 1

Strony

30--39

Opis fizyczny

Bibliogr. 43 poz., fot., rys., tab., wykr.

Twórcy

autor

Paczkowska Karolina

karolina.paczkowska@pwr.edu.pl

Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, ul. Smoluchowskiego 25,50-370 Wrocław, Poland

https://orcid.org/0009-0007-4170-3406

autor

Pacholec Zuzanna

Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, ul. Smoluchowskiego 25,50-370 Wrocław, Poland

https://orcid.org/0009-0002-4384-0344

autor

Szychta Grzegorz

Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, ul. Smoluchowskiego 25,50-370 Wrocław, Poland

autor

Błażejewski Wojciech

Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, ul. Smoluchowskiego 25,50-370 Wrocław, Poland

https://orcid.org/0000-0001-9260-1388

autor

Stabla Paweł

Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, ul. Smoluchowskiego 25,50-370 Wrocław, Poland

https://orcid.org/0000-0001-6891-582X

autor

Barcikowski Michał

Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, ul. Smoluchowskiego 25,50-370 Wrocław, Poland

https://orcid.org/0000-0001-5135-7892

Bibliografia

[1] Md Shah A.U., Hameed Sultan M.T., Safri S.N.A.: Polymers 2020,12(6), 1288. https://doi.org/10.3390/polyml2061288
[2] Ahmad M., Feng D., Ali W.: European Journal of Applied Science, Engineering and Technology 2024,2(3), 59. https://doi.org/10.59324/ejaset.2024.2(3).06
[3] Pham D. C., Lua J., Zhang D.: "3D Progressive Failure Modeling of Drop-Weight Impact on Composite Laminates", Materials from ASC 33rd Annual Technical Conference, 2018. https://doi.org/10.12783/asc33/25904
[4] Razali N., Sultan M.T.H., Mustapha Bin F. et al.: The International Journal of Engineering and Science 2014, 3(7), 2319.
[5] Seamone A., Davidson P, Waas A.M.: AIAA SCITECH 2023,2023,1904. https://doi.org/10.2514/6-2023-1904
[6] Liu H. Liu J., Zhou J. et ah: Applied Composite Materials 2020,27,533. https://doi.org/10.1007/sl0443-020-09812-8
[7] Huszak C., Schramkó M., Kovacs T.A.: Muszaki Tudomanyos Kozlemenyek 2023,18,45. https://doi.org/10.33894/mtk-2023.18.08
[8] Cherolis N.E., Benac D.J., Shaffer D.M. et ah: Journal of Failure Analysis and Prevention 2018,18(5), 1143. https://doi.org/10.1007/sll668-018-0504-7
[9] Fedulov B.N., Fedorenko A.N., Lomakin E.V.: IOP Conference Series: Materials Science and Engineering 2019,581(1), 12023. https://doi.org/10.1088/1757-899X/581A/012023
[10] Pandian A., Hameed Sultan M. T., Marimuthu U. et ah: "Low Velocity Impact Studies on Fibre-Reinforced Polymer Composites and Their Hybrids - Review," in "Encyclopedia of Renewable and Sustainable Material, vol. 5" (editors Hashmi S., Choudhury I.A.), Elsevier, Amsterdam 2019, p. 119. https://doi.org/10.1016/B978-0-12-803581-8.11289-5
[11] Soykok i.F.: Academic Platform - Journal of Engineering and Science 2018, 6(2), 45. https://doi.org/10.21541/apjes.388080
[12] Chang Y., Wen W., Xu Y. et ah: Thin-Walled Structures 2022,177,109361. https://doi.Org/10.1016/j.tws.2022.109361
[13] Mansour G., Tzikas K., Tzetzis D. et ah: Applied Mechanics and Materials 2016, 834,173. https://doi.org/10.4028/www.scientific.net/AMM.834.173
[14] Soykok i.E, Ozcan A.R., Tas H.: Materials Research Express 2019, 6(5), 55307. https://doi.org/10.1088/2053-1591/ab0151
[15] Minak G., Abrate S., Ghelli D. et al: Composites Part B: Engineering 2010,41(8), 637. https://doi.Org/10.1016/j.compositesb.2010.09.021
[16] Soykók i.E, Tas H., Ozdemir O. et al.: Polymers and Polymer Composites 2021,29(6), 617, https://doi.org/10.1177/0967391120930107
[17] da Silva J.E.L., Paciornik S., d'Almeida J.R.M.: Polymer Testing 2004,23(5), 599. https://doi.Org/10.1016/j.polymertesting.2003.10.008
[18] Santulli C.: NDT and E International 2001,34(8), 531. https://doi.org/10.1016/S0963-8695(01)00013-5
[19] Wang S.-X., Wu L., Ma L.: Materials and Design 2010, 31(1), 118. https://doi.Org/10.1016/j.matdes.2009.07.003
[20] Prichard J.C., Hogg P.J.: Composites 1990,21(6), 503. https://doi.org/10.1016/0010-4361(90)90423-T
[21] Kinsey A., Saunders D.E.J., Soutis C.: Composites 1995, 26(9/, 661. https://doi.org/10.1016/0010-4361(95)98915-8
[22] de Freitas M., Reis L.: Composite Structures 1998,42(4), 365. https://doi.org/10.1016/S0263-8223(98)00081-6
[23] Mouritz A.P., Gallagher J., Goodwin A.A.: Composites Science and Technology 1997,57(5), 509. https://doi.org/10.1016/S0266-3538(96)00164-9
[24] Zhang Z.Y., Richardson M.O.W.: Composite Structures 2007, 81(2), 195. https://doi.Org/10.1016/j.compstruct.2006.08.019
[25] Shim V.P.W., Yang L.M.: International Journal of Mechanical Sciences 2005,47(4-5), 647. https://doi.Org/10.1016/j.ijmecsci.2005.01.014
[26] Piggott M.R.: "Load Bearings Fibre Composites, 2nd edition", Kluwer Academic Publishers, Dordrecht 2002. p. 259.
[27] Giinoz A., Kur M., Kara M.: Polymer Composites 2024, 45(13), 12481. https://doi.org/10.1002/pc.28650
[28] Targino T., Cunha R., Freire Junior R. et al.: Journal of Composite Materials 2024,58(23), 2555. https://doi.org/10.1177/00219983241274617
[29] Barcikowski M., Królikowski W., Lenart S.: Polimery 2021, 62(9), 650. https://doi.org/10.14314/polimery.2017.650
[30] Zhao S., Gao X., Lou J. et al.: e-Polymers 2024, 24(1), 20240044. https://doi.org/10.1515/epoly-2024-0044
[31] Dahmene F., Yaacoubi S., Mountassir M.E.L.: Physics Procedia 2015, 70,599. https://doi.Org/10.1016/j.phpro.2015.08.031
[32] de Groot P.J., Wijnen P., Janssen R.: Composites Science and Technology 1995,55(4), 405. https://doi.org/10.1016/0266-3538(95)00121-2
[33] Sayar H., Azadi M., Ghasemi-Ghalebahman A. et al: Composite Structures 2018,204,1. https://doi.Org/10.1016/j.compstruct.2018.07.047
[34] Kumar A.L., Prakash M.: Iranian Polymer Journal 2023, 32(7), 887. https://doi.org/10.1007/sl3726-023-01171-y
[35] Hemanth Raj G., Prakash M., Kumar A.L.: IOP Conference Series: Materials Science and Engineering 2020, 912(3), 032050. https://doi.Org/10.1088/1757-899X/912/3/032050
[36] Vasiliev V.V, Morozov E.: "Advanced Mechanics of Composite Materials. Second edition", Elsevier, Amsterdam 2007. https://doi.org/10.1016/B978-0-08-045372-9.X5000-3
[37] Duda S., Smolnicki M., Stabla P. et al.: Thin-Walled Structures 2024,195,111364. https://doi.Org/10.1016/j.tws.2023.111364
[38] Fang R, Xu Y., Yuan S. et al.: "Investigation on Mechanical Properties of Fiberglass Reinforced Flexible Pipes Under Torsion." Materials from the ASME 2018 37th International Conference on Ocean, Spain, Madrid, June 17-22 2018. https://doi.org/10.1115/OMAE2018-77354
[39] Wilhelmsson D., Mikkelsen L.P., Faester S. et al.: Composites Part A: Applied Science and Manufacturing 2019,119,283. https://doi.Org/10.1016/j.compositesa.2019.01.018
[40] He R., Cheng L., Gao Y. et al.: Composites Science and Technology 2023,244,110307. https://doi.Org/10.1016/j.compscitech.2023.110307
[41] Davidson R, Waas A.M.: Mathematics and Mechanics of Solids 2016,21(6), 667. https://doi.org/10.1177/1081286514535422
[42] Xun L., Mosleh Y., Sun B. et al: Composites Science and Technology 2024,252,110615. https://doi.org/10.1016/jxompscitech.2024.110615
[43] Wang D., Liao B., Hao C. et al: International Journal of Hydrogen Energy 2021,46(23), 12605. https://doi.Org/10.1016/j.ijhydene.2020.12.177

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-0316659b-766c-4378-bdf7-1be89e1500b6