Recycling of waste moulding sands with new binders

• Autorzy: Izdebska-Szanda I. , Angrecki M. , Palma A.
• Języki publikacji: EN

Abstrakty

EN

This paper presents the results of research which is part of studies carried out under the project POIG.01.01.02-00-015/09 "Advanced Materials and Technologies", one of the aims of which is to introduce new, environment-friendly, inorganic binders to the production of castings from non-ferrous metals. The paper presents the results of research on the management of waste moulding sands prepared according to the new technology, including their multiple reclamation and management of post-reclamation waste. Studies of multiple reclamation are a continuation of the preliminary research described earlier. The programme of the studies described in this paper also included validation of the results under industrial conditions.

Słowa kluczowe

EN

innovative foundry material; innovative foundry technology; modified inorganic binder; reclamability; management; post reclamation waste

PL

innowacyjny materiał odlewniczy; innowacyjna technologia odlewnicza; spoiwo nieorganiczne; odpad porekultywacyjny

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2013
• Tom: Vol. 13, iss. 2
• Strony: 43--48
• Opis fizyczny: Bibliogr. 12 poz., rys., tab., wykr.

Twórcy

autor

Izdebska-Szanda I.

• Foundry Research Institute, Zakopiańska 73, 30-418 Cracow, Poland

autor

Angrecki M.

• Foundry Research Institute, Zakopiańska 73, 30-418 Cracow, Poland

autor

Palma A.

• Foundry Research Institute, Zakopiańska 73, 30-418 Cracow, Poland

Bibliografia

• [1] The Act on waste of April 20, 2001 - Acts. U. No. 62, item. 628.
• [2] Maj, M., Kalandyk, B. & Zapała, R. (2010). Modern recycling methods in metallurgical industry. Archives of foundry Engineering. 10(spec. 2), 103-106.
• [3] Collective work edited by Holtzer, M., & Dańko, J. (2010). Capabilities and limitations of the methods of waste foundry processes. Cracow: Scientific Publisher AKAPIT, ISBN 978-83-60958-57-5.
• [4] European Parliament and Council Directive 2006/12/WE of 05.04.2006 on waste.
• [5] National Waste Management Plan - NWMP-adopted as a regulation (Resolution No. 219 of the Council of Ministers of 29.10.2002 year - Polish Monitor of 2003, NR11, poz.159).
• [6] Baliński, A. (2009). About structure of hydrated sodium silicate as a binder of moulding sands. Cracow: Foundry Research Institute, (ISBN 978-83-88-770-43-2).
• [7] Izdebska-Szanda, I. (2009). Moulding sand with silicate binder characterized by beneficial technological and ecological properties. Unpublished doctoral dissertation, Faculty of Mechanical Engineering and Management, Poznań University of Technology.
• [8] Baliński, A. & Izdebska-Szanda I. (2004). Effect of morphoactive modifiers of hydrated sodium silicate on temperature transformations taking place in moulding sands prepared with this binder. Archives of Mechanical Technology and Automation. 24, 19-29.
• [9] Izdebska-Szanda, I., Szanda, M. & Matuszewski, S. (2011). Technological and ecological studies of moulding sands with new inorganic binders for casting of non-ferrous metal alloys. Archives of foundry Engineering. 11(1), 43-48.
• [10] Izdebska-Szanda, I. & Baliński, A. (2011). New generation of ecological silicate binders, ELSEVIER, 2011 from Elsevier Ltd. http://dx.doi.org/10.1016/j.proeng. 2011.04.146. DOI: 10.1016.
• [11] Izdebska-Szanda, I., Baliński, A. & Angrecki, M. (2012). Evaluation of reclamability of molding sands with new inorganic binders. Archives of foundry Engineering. 12 (2), 35-40. DOI: 10.2478/v10266-012-0032-y.
• [12] Izdebska-Szanda, I., Angrecki, M. & Matuszewski, S. (2012). Investigating of the knocking out properties of moulding sands with new inorganic binders used for casting of non-ferrous metal alloys in comparison with the previously used. Archives of foundry Engineering. 12 (spec. 2), 117-120.