Structural, Mechanical and Tribological Properties of Spark Plasma Sintered Ti6Al4V Alloy

• Autorzy: Mróz A. , Grabiec D. , Wielowiejska-Giertuga A. , Wiśniewski T. , Gierzyńska-Dolna M. , Matyła A.

Identyfikatory

DOI

10.1515/amm-2016-0113

• Języki publikacji: EN

Abstrakty

EN

The influence of spark plasma sintering parameters on the structural, mechanical and tribological characteristics of the Ti6Al4V alloy, which is used as implant material in biomedical engineering, was investigated. The experimental data confirm that full density and attractive mechanical properties can be obtained using the spark plasma sintering method. Tribological tests, performed in dry conditions, allowed the authors to indicate the most suitable sintering parameters. The material characterized by the highest wear resistance was selected for further tribological testing in articulation with UHMWPE in simulated body fluids. Although the weight of the polymeric material articulating against the sintered Ti6Al4V was slightly higher compared to the UHMWPE articulating against the reference material (Ti6Al4V rod), the friction coefficient was lower.

Słowa kluczowe

EN

Ti6Al4V alloy; spark plasma sintering; mechanical properties; friction and wear properties

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2A
• Strony: 665--670
• Opis fizyczny: Bibliogr. 14 poz., rys.

Twórcy

autor

Mróz A.

• Metal Forming Institute, Poznan, Poland

autor

Grabiec D.

• Metal Forming Institute, Poznan, Poland

autor

Wielowiejska-Giertuga A.

• Metal Forming Institute, Poznan, Poland

autor

Wiśniewski T.

• Metal Forming Institute, Poznan, Poland

autor

Gierzyńska-Dolna M.

• Metal Forming Institute, Poznan, Poland

autor

Matyła A.

• Central Laboratory of Batteries and Cells, Poznan, Poland

Bibliografia

• [1] Y. Quan, F. Zhang, H. Rebl, B. Nebe, Ol Kessler, E. Burkel, Materials Science and Engineering A 565, 118, (2013).
• [2] N. Biswas, J.L. Ding, International Journal of Impact Engineering 82, 89 (2015).
• [3] W. Shi, H. Dong, T. Bell, Materials Science and Engineering A 291, 27 (2000).
• [4] F. Zhang, M. Reich, O. Kessler, E. Burkel, Materials Today 16, 192 (2013).
• [5] S. G. Tabrizi, S. A. Sajjadi, A. Babakhani, W. Lu, Materials Science and Engineering A 624, 271, (2015).
• [6] H. Yanjun, L. Jinxu, L. Jianchong, L. Shukui, Z. Qinghe, Ch. Xingwang, Materials & Design 65, 94, (2015).
• [7] F. Despang, A. Bernhardt, A. Lode, Th. Hanke, D. Handtrack, B. Kieback, M. Gelinsky, Acta Biomaterialia 6, 1006, (2010).
• [8] J. W. Elmer, T.A. Palmer, S.S. Babu, W. Zhang, T. Debroy, Journal of Applied Physics 12 (2003).
• [9] R. Pederson, O. Babushkin, F. Skystedt R. Warren, Material Science and Technology 19, 1533 (2003).
• [10] R. Dabrowski, Archives of Metallurgy and Materials 56, 703, (2011).
• [11] B. Vrancken, L. Thijs, J.P. Kruth, J. Van Humbeeck, Journal of Alloys and Compounds 541, 177 (2012)
• [12] I. Cvijović-Alagić, S. Mitrović, Z. Cvijović, D. Veljović, M. Barić, M. Rakin, Tribology in Industry 31, 3-4, 17-22 (2009).
• [13] M. Gierzyńska-Dolna, M. Lijewski, A. Mróz, Tribologia 3, 255 (2014).
• [14] J. Park, Bioceramic, Properties, Characterizations, and Applications, Springer Science+Business Media, New York 2008.