Optimization of filler metals consumption in the production of welded steel structures

• Autorzy: Pańcikiewicz K. , Tuz L. , Żurek Z. , Rakoczy Ł.

Identyfikatory

DOI

10.1515/adms-2016-0003

• Języki publikacji: EN

Abstrakty

EN

The paper presents the some aspects of the optimization of filler metals consumption in the production of welded steel structures. Correct choice of beveling method can allow to decrease cost of production and increase quality. The review of calculation methods of filler metal consumption at the design stage was carried out. Moreover, the practical examples of amount of filler metals calculation were presented and analyzed. The article also contain examples of mobile apps which are makes it easy to see welding costs in just a few seconds. Apps as well as simple excel spreadsheets with correct mathematic equations allows to optimize welding process.

Słowa kluczowe

EN

filler metal; optimization; steel structures; beveling; welding app

PL

spoiwo; optymalizacja; konstrukcja stalowa; fazowanie; spawanie

• Wydawca: Politechnika Gdańska
• Czasopismo: Advances in Materials Science
• Rocznik: 2016
• Tom: Vol. 16, nr 1(47)
• Strony: 27--34
• Opis fizyczny: Bibliogr. 8 poz., rys., tab.

Twórcy

autor

Pańcikiewicz K.

• AGH University of Science and Technology in Krakow, Faculty Metals Engineering and Industrial Computer Science, Department of Physical Metallurgy & Powder Metallurgy, Heat Treatment and Welding Laboratory, Poland

autor

Tuz L.

• AGH University of Science and Technology in Krakow, Faculty Metals Engineering and Industrial Computer Science, Department of Physical Metallurgy & Powder Metallurgy, Heat Treatment and Welding Laboratory, Poland

autor

Żurek Z.

• AGH University of Science and Technology in Krakow, Faculty Metals Engineering and Industrial Computer Science, Department of Physical Metallurgy & Powder Metallurgy, Heat Treatment and Welding Laboratory, Poland

autor

Rakoczy Ł.

• AGH University of Science and Technology in Krakow, Faculty Metals Engineering and Industrial Computer Science, Department of Physical Metallurgy & Powder Metallurgy, Heat Treatment and Welding Laboratory, Poland

Bibliografia

• 1. Ferenc K. (Ed.), Welding Technology in Practice (in Polish), Verlag Dashofer.
• 2. Pilarczyk J. (Ed.) Engineer Guide. Welding (in Polish). Vol. 1, Wydawnictwa Naukowo- Techniczne, Warszawa, 2003.
• 3. Słania J., Welding Plans. Theory and Practice (in Polish), Agenda Wydawnicza SIMP, Redakcja Przeglądu Spawalnictwa, Warszawa, 2013
• 4. Ferenc K., Ferenc J., Welded Structures. Joints (in Polish), Wydawnictwa Naukowo-Techniczne, Warszawa, 2006
• 5. PN-EN ISO 9692-1: Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels
• 6. PN-EN ISO 5817: Welding -- Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) -- Quality levels for imperfections
• 7. http://boehler-welding-service.com/voestalpine/calculator/eng/ (07.06.15).
• 8. http://www.fronius.com/cps/rde/xchg/SID-0824496D-CF141849/fronius_international/hs.xsl/79_34740_ENG_HTML.htm#.VXRXElIXhVc (07.06.15)

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.