Preliminary characterization of glycerin, gelatin, propylene glycol, and cellulose based substrates for application in green microelectronics

• Autorzy: Synkiewicz-Musialska Beata , Välimäki Marja , Väisänen Kaisa-Leena , Cichocki Radosław , Uppuluri Kiranmai , Sikora Bartłomiej

Identyfikatory

DOI

10.58332/scirad2024v3i3a04

• Języki publikacji: EN

Abstrakty

EN

In this study, the potential of biopolymer-based films for printed electronics was investigated. Three different tapes were prepared using a modified tape casting method, with compositions including glycerin, propylene glycol, and cellulose combined with gelatin. The films were evaluated for their temperature resistance, dielectric properties, and water absorption. The results indicated that the film with propylene glycol exhibited the highest temperature resistance, making it suitable for further application in electronic devices. Additionally, the dielectric properties were stable across the tested frequency range, and further research on biopolymer based biodegradable substrates is recommended for environmentally friendly electronics.

Słowa kluczowe

EN

transient ICT; transient information and communication technologies; gelatin; printed electronics; flexible substrate

PL

przejściowe technologie informacyjno-komunikacyjne; żelatyna; elektronika drukowana; podłoże elastyczne

• Wydawca: Radomskie Towarzystwo Naukowe
• Czasopismo: Scientiae Radices
• Rocznik: 2024
• Tom: Vol. 3, Iss. 3
• Strony: 212--217
• Opis fizyczny: Bibliogr. 8 poz., 1 il. kolor., wykr.

Twórcy

autor

Synkiewicz-Musialska Beata

• Łukasiewicz Research Network - Institute of Microelectronics and Photonics, Kraków Division ul. Zabłocie 39, 30-701 Kraków, Poland

autor

Välimäki Marja

• VTT-Technical Research Centre of Finland Kaitoväylä 1, P.O. Box 1100, FI‑90571 Oulu, Finland

autor

Väisänen Kaisa-Leena

• VTT-Technical Research Centre of Finland Kaitoväylä 1, P.O. Box 1100, FI‑90571 Oulu, Finland

autor

Cichocki Radosław

• Łukasiewicz Research Network - Institute of Microelectronics and Photonics, Kraków Division ul. Zabłocie 39, 30-701 Kraków, Poland

autor

Uppuluri Kiranmai

• Łukasiewicz Research Network - Institute of Microelectronics and Photonics, Kraków Division ul. Zabłocie 39, 30-701 Kraków, Poland

autor

Sikora Bartłomiej

Bibliografia

• [1] Berggren, M.; Nilsson, D.; Robinson, N.D; Organic Materials for printed electronics. Nature Materials, 2007, 6, 3-5. DOI: 10.1038/nmat1817
• [2] Feig, V.R.; Tran, H.; Bao, Z.; Biodegradable Polymeric Materials in Degradable Electronic Devices, Am. Chem. Soc. Central Sci., 2018, 4, 337-348. DOI:0.1021/acscentsci.7b00595
• [3] Soon, C.F., Yee, S.K., Nordin, A.N. et al. Advancements in Biodegradable Printed Circuit Boards: Review of Material Properties, Fabrication Methods, Applications and Challenges. Int. J. Precis. Eng. Manuf. 2024, 25, 1925-1954. DOI: 10.1007.s12541-024-01027-2
• [4] Géczy, A.; Farkas, C.; Kovács, R.; Froš, D.; Veselý P.; Bonyár, A.; Biodegradable and Nanocomposite Materials as Printed Circuit Substrates: A Mini-Review, IEEE Open J. Nanotechnol. 2022, 3, 182-190. DOI: 10.1109/OJNANO.2022.3221273
• [5] Synkiewicz, B.; Szwagierczak, D.; Kulawik, J. Multilayer LTCC structures based on glass-cordierite layers with different porosity, Microelectronics Int., 2017, 34(3) 110-115. DOI:10.1108/MI-12-2016-0084
• [6] Välimäki, M; Jansson, E.; Von Morgen, V.J.J.; Ylikunnari, M.; Väisänen, K.L.; Ontero, P.; Kehusmaa, M.; Korhonen, P.; Kraft, TM.; Accuracy control for roll and sheet processed printed electronics on flexible plastic substrates. Int. J. Adv. Manufacturing Technol. 2022, 119, 6255-6273. DOI: 10.1007/s00170-022-08717-z
• [7] Abd El-Kader, M. F. H.; Ragab, H. S.; DC conductivity and dielectric properties of maize starch/methylcellulose blend films. Ionics. 2013, 19, 361-369. DOI:10.1007/s11581-012-0742-8
• [8] Huber, K.C; Embuscado, E.M.; Edible Films and Coatings for Food Applications. 2010, Springer-Verlag New York. DOI:10.1007/978-0-387-92824-1