The measurement test for the identification of current - flux linkage characteristics in synchronous reluctance motors

• Autorzy: Burlikowski W. , Kohlbrenner Ł.
• Języki publikacji: EN

Abstrakty

EN

In the paper a new measurement procedure of identification of synchronous reluctance motors parameters is presented. It is based on extension of traditional current decay test, used both in case of induction and synchronous motors [1, 3]. The main aim of the method is to enable to obtain the current-flux linkage characteristic necessary in case of Hamiltonian model of the machine (eq. 1). In case of 3-phase machine without neutral wire, being the most popular in practical applications [3], the method is based on measurement of currents in two independent phases (Fig. 4, eq. 5). The result of its application in a form of trajectories presenting traces of the chosen flux linkage in a current space is shown in Fig. 8b.

Słowa kluczowe

EN

Synchronous Reluctance Motor; Hamiltonian equations; Current-Flux linkage characteristic

• Wydawca: Wydawnictwo PAK
• Czasopismo: Measurement Automation Monitoring
• Rocznik: 2016
• Tom: Vol. 62, No. 1
• Strony: 33--36
• Opis fizyczny: Bibliogr. 15 poz., fot., rys., schem., wykr., wzory

Twórcy

autor

Burlikowski W.

• Departament of Mechatronics, Faculty of Electrical Engineering, Silesian University of Technology, 10a Akademicka St., 44-100 Gliwice

autor

Kohlbrenner Ł.

• Departament of Mechatronics, Faculty of Electrical Engineering, Silesian University of Technology, 10a Akademicka St., 44-100 Gliwice

Bibliografia

• [1] Paszek W.: Dynamics of alternating current electric machines, (in Polish), Helion, Gliwice, 1998.
• [2] IEEE Guide: Test Procedure for Synchronous Machines, IEEE Std.115-1995.
• [3] Boldea I.: Reluctance Synchronous Machines & Drives, Oxford Univ. Press 1996.
• [4] Burlikowski W.: Mathematical model of an electromechanical actuator using flux state variables applied to reluctance motor, COMPEL, Vol.25, No.1, pp. 169-180, 2006.
• [5] Burlikowski W., Kowalik Z.: Development of a topology-based current-flux characteristic approximation in a Hamiltonian model of a reluctance machine. Arch. Electr. Eng. vol. 64 no. 2, s. 277-289, 2015.
• [6] Jeltsema D., Scherpen J.M.A.: Multidomain modeling of nonlinear networks and systems, IEEE CONTROL SYSTEMS MAGAZINE, August 2009, pp. 28-59.
• [7] Park R.H.: Two-Reaction Theory of Synchronous Machines – Generalized Method of Analysis – Part I, AIEE Trans., Vol. 48, pp.716-727, 1929.
• [8] Sobczyk T.J.: Methodological aspects of mathematical modeling of induction machines, (in Polish), WNT, Warsaw,2004.
• [9] Nehl T.W., Fouad F.A., Demerdash N.A.: Determination of saturated values of rotating machinery incremental and apparent inductances by an energy perturbation method. IEEE Transactions on Power Apparatus and Systems, vol. PAS-101, no. 11, pp. 4441-4451, November 1982 .
• [10] Stumberger G., Stumberger B., and Dolinar D.: Evaluation of saturation and cross magnetization effects in interior permanent magnet synchronous machine. IEEE Trans. Ind. Appl., vol. 39, no. 5, pp. 1264–1271, Sep./Oct. 2003.
• [11] Kilthau A., Pacas J. M.: Parameter-measurement and control of the synchronous reluctance machine including cross saturation. Proc. Conf. Record 36th IEEE Ind. Appl. Soc. Annu. Meeting (IAS), vol. 4, pp. 2301-2309, 2001.
• [12] Richter J., Gemaßmer T., Doppelbauer M.: Predictive Current Control of Saturated Cross-Coupled Permanent Magnet Synchronous Machines, Proc. of International Symposium on Power Electronics Electrical Drives, Automation and Motion, pp. 830-835, 2014.
• [13] Hasni M., Djema S., Touhami O., Ibtiouen R., Fadel M. and Caux S.: Synchronous Machine Parameter Identification in Frequency and Time Domain, Serbian Journal Of Electrical Engineering, Vol. 4, No. 1, 51-69, June 2007.
• [14] Klamka J., Pawełczyk M., Wyrwał J.: Numerical methods. Wyd. Politechniki Śląskiej, Gliwice 2001.
• [15] Smołalski G.: Signal's parameters estimation based on the available knowledge, PAK, vol. 60, nr 12/2014, s. 1140-1143.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę