New Method of Weaving Multiaxis Three Dimensional Flat Woven Fabric: Feasibility of Prototype Tube Carrier Weaving

• Autorzy: Bilisik K.

Warianty tytułu

PL

Nowa metoda otrzymywania wieloosiowych tkanin przestrzennych możliwość realizacji prototypowego tkania z zastosowaniem rurowego podajnika wątku

• Języki publikacji: EN

Abstrakty

EN

A prototype of multiaxis three dimensional (3D) flat weaving was constructed, and the feasibility of this type of weaving was studied. Several multiaxis 3D woven and 3D orthogonal woven unit cells were developed and fabricated for the trial of the preforms. Multiaxis weaving units were described and implemented based on the initial trial period. The performance of each unit cell was tested, and important processing parameters were found to be related to the multiaxis unit cell. It was found that this kind of weaving could be achieved for certain types of unit cell, the results of which can be considered to be encouraging.

PL

Skonstruowano prototyp wieloosiowej 3D maszyny tkackiej oraz badano możliwość pracy tej maszyny. Opracowano szereg wieloosiowych 3D i 3D ortogonalnych członów maszyny dla próbnego wyprodukowania wstępnych wzorników. Wieloosiowe zespoły tkające zostały opisane i zrealizowane na podstawie wstępnego okresu badań. Sprawność działania każdego z zespołów została przebadana. Znaleziono ważne parametry procesu odnoszące się do poszczególnych zespołów maszyny. Stwierdzono, że tego rodzaju proces tkania można wykorzystać dla projektowania nowych jednostkowych typów zespołów a wyniki uzyskane można określić jako zachęcające.

Słowa kluczowe

EN

multiaxis weaving; 3D weaving; bias fibres; multiaxis 3D preform; multiaxis 3D composites; tube carrier weaving

PL

prototyp maszyny tkackiej 3D; wieloosiowe zespoły tkające; tkaniny 3D

• Wydawca: Sieć Badawcza Łukasiewicz - Łódzki Instytut Technologiczny
• Czasopismo: Fibres & Textiles in Eastern Europe
• Rocznik: 2009
• Tom: Vol. 17, no. 6 (77)
• Strony: 63--69
• Opis fizyczny: Bibliogr. 22 poz., rys., tab.

Twórcy

autor

Bilisik K.

• Erciyes University, Engineering Faculty, Department of Textile Engineering, 38039 TalasKayseri, Turkey
• 3TEX Inc., Cary, North Carolinamage, USA

Bibliografia

• 1. Dow M. B., Dexter H. B.; Development of stitched, braided and woven composite structures in the ACT Program and at Langley Research Center (1985 to 1997). NASA/TP-97-206234, 1997.
• 2. Dexter H. B., Hasko G. H.; Mechanical properties and damage tolerance of multiaxial warp-knit composites. Composites Science and Technology, 51, 1996 pp. 367-380.
• 3. Chou T. W.; Microstructural design of fiber composites. UK. Cambridge University Press, 1992 pp. 382-390.
• 4. Sih G. C., Skudra A. M.; Failure mechanics of composites. Newyork, U.S.A. Elsevier Science Publishers B. V., 1986.
• 5. Mohamed M. H.; Three dimensional textiles, American Scientist, 78, 1990 pp. 530-541.
• 6. Brandt J., Drechsler K., Arendts F. J.; Mechanical performance of composites based on various three–dimensional woven fiber performs. Composites Science and Technology, 56, 1996 pp. 381-386.
• 7. Cox B. N., Dadkhah M. S., Morris W. L., Flintoff J. G.; Failure mechanisms of 3D woven composites in tension, compression and bending. ACTA Metallurgica et Materialia, 42, 1993 pp. 3967-84.
• 8. Dow N. F.; Triaxial fabric. United States Patent Application 3446251, 27 May, 1969.
• 9. Dow N. F., Tranfield G.; Preliminary investigations of feasibility of weaving triaxial fabrics (Doweave). Textile Research Journal, 40(11), 1970 pp. 986-998.
• 10. Skelton J.; Triaxially woven fabrics: Their structure and properties, Textile Research Journal, 41(8), 1971 pp. 637-647.
• 11. Lida, S., Ohmori, C. and Ito, T., Multiaxial fabric with triaxial and quartaxial portions. United States Patent Application 5472020, 5 Dec., 1995.
• 12. Anahara M., Yasui Y.; Three dimensional fabric and method for producing the same. United States Patent Application 5137058, 11 Aug., 1992.
• 13. Anahara M., Yasui Y., Omori H.; ThreeDimensional fabric with symmetrically arranged warp and bias yarn layers. United States Patent Application 5270094, 14 Dec., 1993.
• 14. Kamiya R., Cheeseman B. A., Popper P. Chou T. W.; Some recent advances in the fabrication and design of three dimensional textile preforms: A review. Composite Science and Technology, 60, 2000 pp. 33-47.
• 15. Farley, G. L., Method and apparatus for weaving a woven angle ply fabric. United States Patent Application 5224519, 6 July, 1993.
• 16. Mood G. I.; Multiaxial yarn structure and weaving method. United States Patent Application 5540260, 30 July, 1996.
• 17. Mohamed M. H.,Bilisik A.; Multilayered 3D fabric and method for producing. United States Patent Application 5465760, 14 Nov., 1995.
• 18. Bilisik A., Mohamed M. H.; Multiaxis 3D weaving machine and properties of Multiaxial 3D woven carbon/epoxy composites. The 39th International SAMPE Symposium, 11-14 April 1994 Anaheim, USA, 1994.
• 19. Uchida, H., et al.; Three Dimensional weaving machine. United States Patent Application 6003563, 21 Dec., 1999.
• 20. Uchida H., Yamamoto T., Takashima H.; Development of low cost damage resistant composites [online], Muratec Murata Machinery, Ltd. Available from: http://www.muratec.net/jp., 2000. [Accessed 14 May 2008]
• 21. Bryn L., Islam M. A., Lowery W. L., Harries H. D.; Three-dimensional woven forms with integral bias fibers and bias weaving loom. United States Patent Application 6742547, 1 June, 2004.
• 22. Nayfeh S. A., et al.; Bias weaving machine. United States Patent Application 7077167, 18 July 2006.