The possibility of producing graded Al2O3-Mo, Al2O3-Cu, Al2O3-W composites using CSC method

• Autorzy: Wachowski M. , Kaszuwara W. , Miazga A. , Konopka K. , Zygmuntowicz Justyna

Identyfikatory

DOI

10.24425/bpas.2019.128603

• Języki publikacji: EN

Abstrakty

EN

The subject of the study was the production and characterization of three ceramic-metal graded composites, which differed in addition of the metallic phase. The following composites systems were investigated: Al2O3-Mo, Al2O3-Cu, Al2O3-W. Composites were produced by centrifugal slip casting method. This technique combines the classic casting of the slurry into porous molds with the action of centrifugal force. As a result, sleeve-shaped shapes with a metallic phase gradient were obtained. X-ray phase analysis have not revealed new phases in the produced composites. The type of metallic phase and its distribution in the ceramic matrix influenced the hardness of the produced composites.

Słowa kluczowe

EN

centrifugal slip casting; ceramic-metal composites; SEM; Al2O3-Mo; Al2O3-Cu; Al2O3-tungsten; Al203-W

PL

odlewanie odśrodkowe; kompozyty ceramiczno-metalowe; Al2O3-Mo; Al2O3-Cu; Al2O3-W; SEM

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2019
• Tom: Vol. 67, nr 2
• Strony: 179--184
• Opis fizyczny: Bibliogr. 20 poz., rys., tab., wykr.

Twórcy

autor

Wachowski M.

• Military University of Technology, Faculty of Mechanical Engineering, Warsaw, Poland, 2 Gen. Kaliskiego Street, 00-908 Warsaw, Poland

autor

Kaszuwara W.

• Warsaw University of Technology, Faculty of Materials Science and Engineering, 141 Woloska Street, Warsaw, Poland

autor

Miazga A.

• Warsaw University of Technology, Faculty of Materials Science and Engineering, 141 Woloska Street, Warsaw, Poland

autor

Konopka K.

• Warsaw University of Technology, Faculty of Materials Science and Engineering, 141 Woloska Street, Warsaw, Poland

autor

Zygmuntowicz Justyna

• Warsaw University of Technology, Faculty of Materials Science and Engineering, 141 Woloska Street, Warsaw, Poland

Bibliografia

• [1] S. Suresh and A. Mortensen, “Fundamentals of Functionally Graded Materials”, Cambridge University Press, Cambridge, 1998.
• [2] T. Ogawa, Y. Watanabe, H. Sato, I.S. Kim, and Y. Fukui,”Theoretical study on fabrication of functionally graded material with density gradient by a centrifugal solid-particles method”, Composites: Part A 37. 2194‒2200 (2006).
• [3] B. Kieback, A. Neubrand, and H. Riedek, “Processing techniques for functionally graded materials”, Mater. Sci. Eng. A362, 81‒105 (2003).
• [4] T. Hirai, “Functional gradient materials”, Mater. Sci. of Tech. 17B, 293‒341 (1996).
• [5] Y. Fukui, “Fundamental Investigation of Functionally Gradient Material Manufacturing System using Centrifugal Force”, JSME international Journal. 34, 144‒148 (1991).
• [6] K. Konopka, M. Szafran, and E. Bobryk, „Wytwarzanie kompozytów gradientowych Al2O3-Fe metodą odlewania z mas lejnych”, Kompozyty (Composites). 6(1), 57‒61 (2006).
• [7] Y.G. Yeo and S.C. Choi, “Zirconia-stainless steel functionally graded material by tape casting”, J. Eur. Ceram. Soc. 18, 1281–1285 (1998).
• [8] Y.P. Zeng, D.L. Jiang, and T. Watanabe, “Fabrication and properties of tape-casting laminated and functionally gradient alumina-titanium carbide materials”, J. Am. Ceram. Soc. 83, 2999–3003 (2000).
• [9] D.L. Dumont, J.P. Bonnet, T. Chartier, and J. Ferreira, “MoSi2/Al2O3 FGM: elaboration by tape casting and SHS”. J. Eur. Ceram. Soc. 21, 2353–2360 (2001).
• [10] J. Vleugels, G. Anné, S. Put, and O. Biest, “Thick plate-shaped Al2O3/ZrO2 composites with continuous gradient processed by electrophoretic deposition”, Materials Science Forum. 423(4), 171–176 (2003).
• [11] P. Sarkar, S. Datta, and P. Nicholson, “Functionally graded ceramic/ceramic and metal/ceramic composites by electrophoretic deposition”, Composites Part B. 28(1/2), 49–56 (1997).
• [12] Y. Chen, T. Li, and J. Ma, “A functional gradient ceramic monomorph actuator fabricated using electrophoretic deposition”, Ceram. Inter. 30(5), 683–687 (2004).
• [13] J. Zygmuntowicz, A. Miazga, K. Konopka, and W. Kaszuwara, “Alumina matrix ceramic-nickel composites formed by centrifugal slip casting”, Processing and Application of Ceramics. 9:4, 199‒202 (2015).
• [14] J. Zygmuntowicz, A. Miazga, W. Kaszuwara, R. Nowacki, and K. Konopka, “Processing and characterization of ceramic-metal composites obtained by centrifugal slip casting”, Mater. Eng., 213, 211‒214 (2016).
• [15] B. Su, Z.Z. Zhang, and J.H. Meng, “Centrifuge-assisted micromolding of ceramic microparts”, Ceramics International 40, 2014, 13735‒13739
• [16] V.G. Gilev, “Making Hollow Cylindrical Products of High-Porosity Silicon Nitride by the Centrifugal Forming of Granules of a Thixotropic Thermoplastic Slip”, Refractories and Industrial Ceramics 56, 2016, 538‒543
• [17] J. Zygmuntowicz, P. Wiecinska, A. Miazga, K. Konopka, and W. Kaszuwara, “Al2O3/Ni functionally graded materials (FGM) obtained by centrifugal-slip casting method”,. J Therm Anal Calorim. 130(1), 123‒130 (2017).
• [18] J. Zygmuntowicz, A. Miazga, K. Konopka, and W. Kaszuwara, “Metal particles size influence on graded structure in composite Al2O3-Ni”, Mater Tech. 50, 537‒541 (2016).
• [19] J. Zygmuntowicz, A. Miazga, P. Wiecinska, W. Kaszuwara, K. Konopka, and M. Szafran, “Combined centrifugal-slip casting method used for preparation the Al2O3-Ni functionally graded composites” Composites Part B: Engineering 141, 2018, 158‒163
• [20] J. Zygmuntowicz, A. Miazga, K. Konopka, and W. Kaszuwara, “Structural and mechanical properties of graded composite Al2O3/Ni obtained from slurry of different solid content”, Procedia Structural Integrity 1, 2016, 305‒312

Uwagi

EN

The research has been financially supported by the Faculty of Materials Science and Engineering Warsaw University of Technology (statute work and dean grant no. 504M/1090/1226/0000).

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).