PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Compressive properties of stretch-broken carbon fibre (SBCF)/polyamide 12 commingled unidirectional composites

Autorzy
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The present work investigates the compressive properties of SBCF/PA12 commingled unidirectional composites manufactured by the hot compression moulding technique. Different forms of failure mechanism have been observed microscopically for different laminate thicknesses (6, 8, 10, and 12 layers). In addition, fibre-length distribution curves have been developed at failure points. Thus, failure explanations for the SBCF/PA 12 composite during the compression test could be developed, depending upon microscopic observations. Moreover, the effect of laminate thicknesses on compressive behaviour; stress, strain and modulus has been analysed. It was found that by increasing laminate thickness the compressive stress is decreased, the strain is increased and the modulus is decreased significantly.
Rocznik
Strony
166--179
Opis fizyczny
Bibliogr. 15 poz.
Twórcy
autor
  • Concordia Center of Composite Material (CONCOM) Mechanical and Industrial Engineering Department, Concordia University, Montreal, Canada
Bibliografia
  • 1. Botelho EC, L. Figiel, M.C. Rezende, B. Lauke, "Mechanical Behaviour of Carbon Fibre Reinforced Polyamide Composites", Composites Science and Technology, Vol. 63, pp. 1743-1755, 2003.
  • 2. Rodriguez F, "Polymerization Process", Principles of Polymer Systems, 3rd edition, pp. 123-144, 1979.
  • 3. Kim JK, et al., "Effect of Surface Treatment on Mode I Interlaminar Fracture Behaviour of Plain Glass Woven Fabric Composites: Part I. Report of the 2nd Round Robin Test Results", Composite Interface, Vol. 7(3), pp. 227-242, 2000.
  • 4. Lauke B, "Compression Shear Test: A Convenient Apparatus for the Estimation of Apparent Shear Strength of Composite Materials", Applied Composite Materials, Vol. 7, pp. 43-62, 2001.
  • 5. Kuo WS, and Ko TH, "Compressive Damaged in 3 Axis Orthogonal Fabric Composites", Composites Part A, Vol. 31, pp. 1091-1105, 2000.
  • 6. Costa ML, Almeida SFM, Rezende MC, "The Influence of Porosity on The Interlaminar Shear Strength of Carbon/Epoxy and Carbon/Bismaleimide Fabric Laminates", Composites Science and Technology, Vol. 61, pp. 2101, 2001
  • 7. Stanley JN, Raymond JM, Matthew ST, Mohamed GA, Niel WH, "Characterization of Stretched Broken Carbon Fibre (SBCF) Material Forms", the International Technical Conference Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE), Long Beach, CA, USA, 2005.
  • 8. Gregory P. Dillon, Magdy Barsoum, "Characterization of Stretch Broken Carbon Fibre Materials for Automated Forming Processes", the International Technical Conference Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE), Long Beach, CA, USA, 2005.
  • 9. Gregory PD, Daniel W., "Comparison of Continuous Fibre and Stretch Broken Carbon Fibre (SBCF) Materials in Forming Processes", the International Technical Conference Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE), Long Beach, CA, USA, 2005.
  • 10. Gary DR., Mohamed GA., Niel WH., "Composites Forming Investigations of Stretch Broken Carbon Fibre Based Prepreg Forms", the International Technical Conference Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE), Long Beach, CA, USA, 2005.
  • 11. Magdy Barsoum, James Kirk, "Mechanized Forming With Stretch Broken Fibres", the International Technical Conference Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE), Long Beach, CA, USA, 2005.
  • 12. Christopher BM, Daniel W, Yehia Bahei-El-Din, George D., "Forming Of Stretch Broken Carbon Fibre (SBCF) Prepreg Material Over Fixed-Shapes Material Characterization & Modeling", the International Technical Conference Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE), Long Beach, CA, USA, 2005.
  • 13. Florio, DD, "Composite Manufacturing Technologies at CONCOM", CRIAQ Project Technical Report, Concordia University, 2004.
  • 14. Niel WH., Mohamed GA., Guenther J., "Development of Stretch Broken Carbon Fibres Materials", the International Technical Conference Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE), Long Beach, CA, USA, 2005.
  • 15. Lebel L. and Hoa S.V., "Processing and Characterization of Braided Commingled Carbon/Nylon Thermoplastic Composites", International Technical Conference Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE), Long Beach, CA, USA, 2006.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-01b027a7-420d-417a-9b27-1e2c1b9b231a
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.