Disturbances in-situ measurement results on the example of heat transport in multilayer building walls

• Autorzy: Urzędowski Arkadiusz , Gandzel Agnieszka , Sachajdak Andrzej , Paśnikowska-Łukaszuk Magdalena

Identyfikatory

DOI

10.12913/22998624/195002

• Języki publikacji: EN

Abstrakty

EN

The paper demonstrates the challenges in accurately measured heat transport through multilayer walls, emphasizing the need for careful sensor placement and analysis to address potential anomalies and ensure reliable data. The study was conducted on a building constructed in 2010 for agricultural purposes in rural region. The structure, with dimensions of 6×16.8 meters and a single-pitched roof, has partial basement and lacks insulation. The external wall, facing northeast, has internal dimensions of 5.5×3.0 meters and a peak height of 7.5 meters, and is made of 0.24 m thick aerated concrete blocks. The experiment involved placing thermocouples in the walls before installing thermal insulation, with one model coated with a reflective smoothing layer. In the first case, inside the building, the issue was identified as a failure to record data from one channel due to sensor damage, which was detected after the research was completed. In the second case, an error recorded outside was caused by the placement of a temperature sensor in close proximity to a thermal bridge, which distorted the readings. The diagnosis was made possible after processing the results. A large dataset, consisting of nearly 5E6 readings, was collected, which detailed analysis of the graphical and time-consuming interpretation of the results enabled proper interpretation and conclusions. Algorithms based on artificial intelligence could be successfully used to conduct such analyses and detect errors at an early stage of research. These algorithms can perform multicriteria analysis of recorded data in real-time which is of fundamental importance when carrying out research that is not dynamic and requires a long observation time, i.e. during changes in the external temperature.

Słowa kluczowe

EN

heat measurement; building walls; in-situ method

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2025
• Tom: Vol. 19, no. 1
• Strony: 197--208
• Opis fizyczny: Bibliogr. 47 poz., fig.

Twórcy

autor

Urzędowski Arkadiusz

• Faculty of Mathematics and Information Technology, Lublin University of Technology, Nadbystrzycka 38, 20-618 Lublin, Poland

• https://orcid.org/0000-0002-0440-3013

autor

Gandzel Agnieszka

• Faculty of Mathematics and Information Technology, Lublin University of Technology, Nadbystrzycka 38, 20-618 Lublin, Poland

autor

Sachajdak Andrzej

• Faculty of Energy and Environmental Engineering, Silesian University of Technology, Stanisława Konarskiego 18, 44-100 Gliwice, Poland

autor

Paśnikowska-Łukaszuk Magdalena

• Faculty of Mathematics and Information Technology, Lublin University of Technology, Nadbystrzycka 38, 20-618 Lublin, Poland

Bibliografia

• 1. European Commission, A Roadmap for Moving to a Competitive Low Carbon Economy in 2050, Brussels, Belgium, 2011.
• 2. Ballarini I., Corrado V., Madonna F., Paduos S., Ravasio F., "Energy refurbishment of the Italian residential building stock: energy and cost analysis through the application of the building typology," Energy Policy 2017; 105: 148–160.
• 3. Paśnikowska-Łukaszuk M., Wójcicka-Migasiuk D., Wośko E., "Daily analysis of changes taking place in heat exchangers used in combined heat and power plants," Advances in Science and Technology Research Journal 2022; 16(6): 258–266.
• 4. Urzędowski A., Zaburko J., Gleń P., Łagód G., "Numerical and Experimental Investigation of the Influence of External Wall Moisture on Building Temperature Distributions," Advances in Science and Technology Research Journal 2021; 15(3): 297–308.
• 5. Mikušová D., Suchorab Z., Paśnikowska-Łukaszuk M., Zaburko J., Trnik A., "Applying the machine learning method to improve calibration quality of time domain reflectometry measuring technique," Advances in Science and Technology Research Journal 2024; 18(3): 270–279.
• 6. Paśnikowska-Łukaszuk M., Wlazło-Ćwiklińska M., Zubrzycki J., Suchorab Z., "Comparison of measurement possibilities by non-invasive reflectometric sensors and invasive probes," 2023.
• 7. Sharma S., Pany C., Suresh R., Ahamed S.S., "E-Seal in a typical convergent–divergent (CD) nozzle for a liquid engine," in G. Choubey, S. Tripathi, V. K. Singh, and P.M.V. Subbarao (Eds.), Advances in Thermal Engineering, Singapore: Springer Nature Singapore 2024: 151–164.
• 8. Sharma S., Pany C., Suresh R., Ahamed S., Krishnadasan C.K., "Spiral wound gasket in a typical liquid engine convergent-divergent nozzle," in V.K. Singh, G. Choubey, and S. Suresh (Eds.), Advances in Thermal Sciences, Singapore: Springer Nature Singapore 2023: 187–201.
• 9. Kosiński P., Brzyski P., Suchorab Z., Łagód G., "Heat losses caused by the temporary influence of wind in timber frame walls insulated with fibrous materials," Materials 2020.
• 10. Urzędowski A., Styczeń J., Wójcicka-Migasiuk D., "Analysis of thermal properties and heat loss in construction and isothermal materials of multilayer building walls," Advances in Science and Technology Research Journal 2017; 11(2): 33–37.
• 11. Majerek D., Sędzielewska E., Paśnikowska-Łukaszuk M., Łazuka E., Suchorab Z., Łagód G., "Automatic image analysis method as a tool to evaluate the anisotropy of autoclaved aerated concrete for moisture and heat transport," 2024.
• 12. Chwieduk D. A., "Some aspects of energy efficient building envelope in high latitude countries," Solar Energy 2016; 133: 194–206.
• 13. Evaluation of measurement data — Guide to the Expression of Uncertainty in Measurement, 2008.
• 14. Kubiczek K., Kampik M., Grzenik M., "Analysis of DC reversal error of the calorimetric thermal voltage converter," Measurement 2021; 168: 108439.
• 15. Taylor J., Wstęp do analizy błędu pomiarowego, Warszawa: Wydawnictwo Naukowe PWN, 1995.
• 16. Li F., Zuo W., Zhou K., Li Q., Huang Y., Zhang G., "State-of-charge estimation of lithium-ion battery based on second order resistor-capacitance circuit-PSO-TCN model," Energy 2024; 289: 130025.
• 17. Huang Y. et al., "A high constancy and noise suppression voltage shift generator in SEIR-based BIST circuit for ADC linearity test," Microelectronics Journal 2024; 151: 106341.
• 18. Lisowski M., Podstawy metrologii, Wrocław, 2011.
• 19. Słoma J., Szczygieł I., Sachajdak A., "Modelling of thermal phenomena in electric arc during surfacing," Archives of Civil and Mechanical Engineering 2011; 11(2): 437–449.
• 20. Sachajdak A., Słoma J., Szczygieł I., "Thermal model of the gas metal arc welding hardfacing process," Applied Thermal Engineering 2018; 141: 378–385.
• 21. Sachajdak A., Lappalainen J., Mikkonen H., "Dynamic simulation in development of contemporary energy systems – oxy combustion case study," Energy 2019; 181: 964–973.
• 22. Kou Z., Wu R., Wang Q., Li B., Li C., Yin X., "Heat transfer error analysis of high-temperature wall temperature measurement using thermocouple," Case Studies in Thermal Engineering 2024; 59: 104518.
• 23. Barnat-Hunek D., Lagod G., Klimek B., "Evaluation of the contact angle and frost resistance of hydrophobised heat-insulating mortars with polystyrene," vol. 1866, 2017.
• 24. Dz.U. 1225, Obwieszczenie Ministra Rozwoju i Technologii z dnia 15 kwietnia 2022 r. w sprawie ogłoszenia jednolitego tekstu rozporządzenia Ministra Infrastruktury w sprawie warunków technicznych, jakim powinny odpowiadać budynki i ich usytuowanie 2022.
• 25. PN-EN ISO 6946:2017, Komponenty budowlane i elementy budynku Opór cieplny i współczynnik przenikania ciepła – Metoda obliczania.
• 26. PN-EN ISO 13789:2017-10, Thermal performance of buildings – transmission and ventilation heat transfer.
• 27. PN-EN ISO 12524:2003, Building materials and products.
• 28. Bienvenido-Huertas D., Moyano J., Marín D., Fresco-Contreras R., "Review of in situ methods for assessing the thermal transmittance of walls," Renewable and Sustainable Energy Reviews 2019; 102: 356–371.
• 29. Ha T. T. et al., "Measurement prototype for fast estimation of building wall thermal resistance under controlled and natural environmental conditions," Energy and Buildings 2022; 268: 112166. DOI: 10.1016/J.ENBUILD.2022.112166.
• 30. François A., Ibos L., Feuillet V., Meulemans J., "Novel in situ measurement methods of the total heat transfer coefficient on building walls," Energy and Buildings 2020; 219: 110004.
• 31. ISO 9869-1:2014, Thermal insulation – Building elements – In-situ measurement of thermal resistance and thermal transmittance – Part 1: Heat flow meter method.
• 32. ISO 9869-2:2014, Thermal insulation – Building elements – In-situ measurement of thermal resistance and thermal transmittance – Part 2: Infrared method for frame structure dwelling.
• 33. Khalifa A.J.N., Marshall R.H., "Validation of heat transfer coefficients on interior building surfaces using a real-sized indoor test cell," International Journal of Heat and Mass Transfer 1990; 33(10): 2219–2236.
• 34. Jayamaha S. E. G., Wijeysundera N. E., Chou S. K., "Measurement of the heat transfer coefficient for walls," Building and Environment 1996; 31(5): 399–407.
• 35. Pinheiro Ramos N., Delgadillo Buenrostro L., Metrevelle Marcondes de Lima e Silva S., Gosselin L., "Inverse estimation of the annual heat flux through the internal surface of a multilayer wall in an occupied prefabricated house from field measurements," International Communications in Heat and Mass Transfer 2024; 158: 107872.
• 36. Choi J.S., Kim C., Jang H., Kim E.J., "In-situ evaluation of window-wall joint performance using numerical models and thermal images," Case Studies in Thermal Engineering 2023; 45: 102988.
• 37. Zhang D., Zhan C., Chen L., Wang Y., Li G., "An in-situ detection method for assessing the thermal transmittance of building exterior walls using unmanned aerial vehicle–infrared thermography (UAV-IRT)," Journal of Building Engineering 2024; 91: 109724.
• 38. Xu B., Cheng Y. Xia, Chen X. Ni, Xie X., Ji J., Jiao D. Sheng, "Error correction method for heat flux and a new algorithm employed in inverting wall thermal resistance using an artificial neural network: Based on IN-SITU heat flux measurements," Energy 2023; 282: 128896.
• 39. Li W., Zhang G., Yang D., "Comparative study for flow condensation heat transfer in horizontal enhanced tubes based on machine learning," International Journal of Heat and Mass Transfer 2024; 224: 125330.
• 40. Vohra K., Vodonos A., Schwartz J., Marais E.A., Sulprizio M.P., Mickley L.J., "Global mortality from outdoor fine particle pollution generated by fossil fuel combustion: Results from GEOS-Chem," Environmental Research 2021; 195: 110754.
• 41. Woroniak G., Piotrowska-Woroniak J., "Effects of pollution reduction and energy consumption reduction in small churches in Drohiczyn community," Energy and Buildings 2014; 72: 51–61.
• 42. Tzoulis T., Kontoleon K.J., "Thermal behaviour of concrete walls around all cardinal orientations and optimal thickness of insulation from an economic point of view," Procedia Environmental Sciences 2017; 38: 381–388.
• 43. Siddique N., Paheding S., Elkin C.P., Devabhaktuni V., "U-Net and Its Variants for Medical Image Segmentation: A Review of Theory and Applications," IEEE Access 2021; 9: 82031–82057.
• 44. Liu Z., Mao H., Wu C.Y., Feichtenhofer C., Darrell T., Xie S., "A ConvNet for the 2020s," Proceedings of the IEEE Computer Society Conference on Computer Vision and Pattern Recognition, 2022: 11966–11976.
• 45. Wightman R., Touvron H., Jégou H., "ResNet strikes back: An improved training procedure in timm," 2021: 1–22.
• 46. Liu Z. et al., "Swin transformer: hierarchical vision transformer using shifted windows," in 2021 IEEE/CVF International Conference on Computer Vision (ICCV), 2021.
• 47. Waqas A., Araji M. T., "Machine learning-aided thermography for autonomous heat loss detection in buildings," Energy Conversion and Management 2024; 304: 118243.