PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The Compositions: Biodegradable Material - Typical Resin, as Moulding Sands’ Binders

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper presents possibility of using biodegradable materials as parts of moulding sands’ binders based on commonly used in foundry practice resins. The authors focus on thermal destruction of binding materials and thermal deformation of moulding sands with tested materials. All the research is conducted for the biodegradable material and two typical resins separately. The point of the article is to show if tested materials are compatible from thermal destruction and thermal deformation points of view. It was proved that tested materials characterized with similar thermal destruction but thermal deformation of moulding sands with those binders was different.
Rocznik
Strony
35--40
Opis fizyczny
Bibliogr. 27 poz., rys., wykr.
Twórcy
  • AGH University of Science and Technology, Faculty of Foundry Engineering, Department of Moulding Materials, Mould Technology and Foundry of Non-ferrous Metals, al. Mickiewicza 30, 30-059 Krakow, Poland
autor
  • AGH University of Science and Technology, Faculty of Foundry Engineering, Department of Moulding Materials, Mould Technology and Foundry of Non-ferrous Metals, al. Mickiewicza 30, 30-059 Krakow, Poland
  • AGH University of Science and Technology, Faculty of Foundry Engineering, Department of Moulding Materials, Mould Technology and Foundry of Non-ferrous Metals, al. Mickiewicza 30, 30-059 Krakow, Poland
autor
  • AGH University of Science and Technology, Faculty of Foundry Engineering, Department of Moulding Materials, Mould Technology and Foundry of Non-ferrous Metals, al. Mickiewicza 30, 30-059 Krakow, Poland
Bibliografia
  • [1] Pielichowski, J., Puszyński, A. (2003). Plastic technology. Warszawa: WNT.
  • [2] Kilarska, M., Solarski, W., Zawada, J., Zieliński, E. (1990). Chemical binders molding. Kraków: Wydawnictwo AGH.
  • [3] Serghini, A. (2010). Silicate systems, cold-box - if they can reach the top?, Przegląd Odlewnictwa, 5-6, 220-225.
  • [4] Major-Gabryś, K. (2007). Moulding with water glass easy to knock out. Unpublished doctoral dissertation, AGH University of Science and Technology, Kraków, Poland.
  • [5] Major-Gabryś K., Dobosz St.M. (2010). Loose weight selfhardening of hydrated sodium silicate and liquid hardeners ester. Polska Metalurgia w latach 2006-2010. Komitet Metalurgii Polskiej Akademii Nauk. Wydawnictwo Naukowe AKAPIT. Kraków, 328-335.
  • [6] Major-Gabryś, K., Dobosz, St.M. & Jakubski, J. (2013). Modified hydrated sodium silicate as a modern binder for ecological moulding sands. Manufacturing Technology. 13(1), 68-73. ISSN 1213-2489.
  • [7] Major-Gabryś K. & Dobosz, St.M. (2009). A new ester hardener for moulding sands with water glass having slower activity. Archives of Foundry Engineering. 9(4), 125-128.
  • [8] Dobosz, St.M. & Major-Gabryś, K. (2006). New aspects in the use of the mass with water glass. Materials Engineering SK. 13(3), 14-17.
  • [9] Novotny, J. (2005). Mass self-curing of the bonding system geopolimerowym, Mat. VIII Konferencji Odlewniczej TECHNICAL 2005, 111-118.
  • [10] Burian, A., Antoš, P. & Hrazdera, M. (2005). Geopolymerni pojivovy system a vlasnosti pojivove obalky zrn. Vyzkum a vyvoj ve slevarenstvi. 200-203.
  • [11] Dobosz, St.M., Jelinek, P. & Major-Gabryś, K. (2011). Development tendencies of moulding and core sands, China Foundry. 8(4), 438-446.
  • [12] Kuciel, S., Liber-Kneć, A. & Zajchowski, S. (2009). Biocomposites matrix of thermoplastic starch or a mixture of polylactide with starch filled with natural fibers, POLIMERY. 54(10), 667-673.
  • [13] Avérous, L. (2004). Biodegradable multiphase system based on plasticized starch: A Review. Journal of Macromolecular Science. Part C – Polymer Reviews. C44(3), 231-274.
  • [14] Avérous, L. (2008). Polylactic acid: Synthesis, Properties and Application, Monomers, Polymers and Composites from Renewable Resources. Elsevier. 433-450.
  • [15] Coleman, D., Crossley, D. (1996). Fundamentals of Soil Ecology. London: Academic Press Limited, UK.
  • [16] Contractor’s Report to the Board, Performance Evaluation of Environmentally Degradable Plastic Packaging and Disposable Food Service Ware – Final Report, Zero Waste California Integrated Waste Management Board, 2007.
  • [17] Mohanty, A.K., Misra, M., and Drzal, L.T. (2005). Natural fibres, biopolymers, and their bio-composites. CRC Press: UK, 2005.
  • [18] Scott, G (2001). Environmentally degradable polyolefins: When, why and how. In Expert Group Meeting on Environmentally Degradable Plastics, Present Status and Perspectives. Trieste: ICS-UNIDO, 37-48.
  • [19] Choi, E.J. & Park, J.K. (1996). Study on biodegradability of PCL/SAN blend using composting method. Polymer Degradat. Stabil. 52, 321-326.
  • [20] Astete, C.E. & Sabliov, C.M. (2006). Synthesis and characterization of PLGA nanoparticles. Journal of Biomaterials Science - Polymer Edition. 17(3), 247-289.
  • [21] Iwamoto, A. & Tokiwa, Y. (1994). Enzymatic degradation of plastics containing polycaprolactone. Polymer Degradat. Stabil. 45(2), 205-213.
  • [22] Lewandowski, J.L. (1997). Materials for molds. Kraków.
  • [23] Gavi, E., Marchisio, D.L., Barresi, A.A. (2009). CFD modelling of polycaprolactone nanoparticles precipitation via solvent – displacement for pharmaceutical applications, In: 8th World Congress of Chemical Engineering, 23-26.
  • [24] Pinto Reis, C., Neufeld, R.J., Ribeiro, A. & Veiga, F. (2006). Nanoencapsulation I. Methods for preparation of drug-loaded polymeric nanoparticles, Nanomedicine: Nanotechnology, Biology, and Medicine. 2, 8-21.
  • [25] Grabowska, B. (2013). New polymeric binder in the form of aqueous composition involving poly (acrylic acid) or a salt thereof and a modified biopolymer for use in casting. Kraków: WN Akapit.
  • [26] Pielichowski, J. & Pielichowski, K. (1995). Application of thermal analysis for the investigation of polimer degradation process. Journal of Thermal Analysis. 43, 505-508.
  • [27] Dobosz, St. M. & Jakubski, J. (2001). Hot-distortion – important criterion for assessing the quality of core masses. Archives of Mechanical Technology and Automation. 21(spec.) 195–196.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-0184091f-a101-4e67-8e96-ad87424b40b3
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.