Computer Simulation of the Impact of Optimization of Width in the Helical Cylindrical Gear on Bearing and Durability Part 1. Height Correction of the Gear Profile

• Autorzy: Czerniec Myron

Identyfikatory

DOI

10.12913/22998624/99037

• Języki publikacji: EN

Abstrakty

EN

Based on the elaborated calculation method he authors method for determining the wear and durability of gears was employed to measure the maximum contact pressures, linear wear of teeth and durability of the gear with height correction of the profile. The optimal condition width in involute helical gears is indicated ensuring constant length of the line of contact between the meshing gears. As a result, it was possible to determine variations in the parameters for the optimized gear describing the meshing gears at different values of the profile correction coefficients.

Słowa kluczowe

EN

block calculation method; helical cylindrical gear; height correction of engagement; optimal gear width; maximum contact pressures; tooth wear; gear durability

PL

metoda obliczania bloku; śrubowe koło walcowe; korekta wysokości sprzężenia; optymalna szerokość koła zębatego; maksymalne naciski kontaktowe; zużycie zębów; trwałość koła zębatego

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2019
• Tom: Vol. 13, no 1
• Strony: 52--59
• Opis fizyczny: Bibliogr. 19 poz., fig.

Twórcy

autor

Czerniec Myron

• Institute of Information Technology Systems, Lublin University of Technology, ul. Nadbystrzycka 36, 20-618 Lublin, Poland

Bibliografia

• 1. Drozdov Yu. To the development of calculation methods on friction wear and modeling. Wear resistance. Science, Moscow, 1975.
• 2. Pronikov A. Reliability of machines. Mashinostroenie, Moscow, 1978.
• 3. Grib V. Solution of tribotechnical tasks with numerous methods. Science, Moscow, 1982.
• 4. Brauer J., Andersson S. Simulation of wear in gears with flank interference – a mixed FE and analytical approach. Wear, (254), 2003, 1216-1232.
• 5. Flodin A., Andersson S. Simulation of mild wear in spur gears. Wear, 1-2, (207), 1997, 16-23.
• 6. Flodin A., Andersson S. Wear simulation of spur gears. Tribotest J, 3 (5), 1999, 225-250.
• 7. Flodin A., Andersson S. Simulation of mild wear in helical gears. Wear, 2 (241), 2000, 123-128.
• 8. Flodin A., Andersson S. A simplified model for wear prediction in helical gears. Wear, 3–4 (249), 2001, 285-292.
• 9. Ulaga S. M., Ulbin M., Flasker J. Contact problems of gears using Overhauser splines. Int. J. Mech. Sci, (42), 1999, 85-95.
• 10. Kahraman A., Bajpai P., Anderson N.Е. Influence of tooth profile deviations on helical gear wear. J. Mech. Des., 4 (127), 2005, 656-663.
• 11. Pasta A., Mariotti Virzi G. Finite element method analysis of a spur gear with a corrected profile. J. Strain Analysis, (42), 2007, 281-292.
• 12. Mekhalfa A., Bonaricha A., Kallouche A., Hadjadj E. Teeth’s Gear Correction. J. Rev. of Mech. Ing., 3, 2009, 271-274.
• 13. 13. Kolivand M., Kahraman A. An ease-off based method for loaded tooth contact analysis of hypoid gears having local and global surface deviations. J. Mech. Des., 7 (132), 2010.
• 14. Zwolak J., Martyna М. Analiza naprężeń kontaktowych i naprężeń zginających występujących w przekładniach zębatych power shift. Tribologia, 3 (42), 2011, 155-165.
• 15. Zwolak J., Wittek M. Optymalizacja parametrów geometrycznych kół zębatych w aspekcie minimalizacji naprężeń kontaktowych. Tribologia, 6 (45), 2011, 283-291.
• 16. Chernets M.V., Yarema R.Ya., Chernets Yu.M. A method for the evaluation of the influence of correction and wear of the teeth of a cylindrical gear on its durability and strength. Part 1. Service live and wear. Materials Science, 3, 2012, 289-300.
• 17. Chernets M.V., Yarema R.Ya., Chernets Yu.M. A method for the evaluation of the influence of correction and wear of the teeth of a cylindrical gear on its durability and strength. Part 2. Contact strength. Materials Science, 6, 2012, 752-756.
• 18. Chernets M., Kiełbiński J., Chernets Yu. A study on the impact of teeth meshing conditions and profile correction on the cappying capacity, wear and life of a cylindrical gear. Tribologia, 2, 2016, 25-43.
• 19. Czerniec M. The accuracy of an accelerated method for the evaluation of life of cylindrical gears with profile correction. Applied Computer Science, 1, 2015, 66–74.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).