Contribution of Different Hardening Mechanisms during Cold Working of AISI 304L Austenitic Stainless Steel

• Autorzy: Mirzaie T. , Mirzadeh H. , Naghizadeh M.

Identyfikatory

DOI

10.24425/123806

• Języki publikacji: EN

Abstrakty

EN

The contributions of work-hardening of austenite and the presence of martensite on the hardening of an AISI 304L stainless steel were evaluated based on plastic deformation under different reductions in thickness at two rolling temperatures. The cold deformation temperatures of 300 K and 373 K were chosen to induce strain-hardening plus strain-induced martensitic transformation in the former and strain-hardening in the latter. This made it possible to elucidate the real effects of strengthening mechanisms of metastable austenitic stainless steels during mechanical working.

Słowa kluczowe

EN

stainless steels; deformation-induced martensite; work hardening

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 3
• Strony: 1317--1320
• Opis fizyczny: Bibliogr. 21 poz., rys., wykr., wzory

Twórcy

autor

Mirzaie T.

• University of Tehran, College of Engineering, School of Metallurgy and Materials Engineering, P. O. Box 11155-4563, Tehran, Iran

autor

Mirzadeh H.

• University of Tehran, College of Engineering, School of Metallurgy and Materials Engineering, P. O. Box 11155-4563, Tehran, Iran

autor

Naghizadeh M.

• University of Tehran, College of Engineering, School of Metallurgy and Materials Engineering, P. O. Box 11155-4563, Tehran, Iran

Bibliografia

• [1] K. Nagai, Can. Metall. Q. 44, 187-194 (2005).
• [2] H. Mirzadeh, J. M. Cabrera, A. Najafizadeh, P. R. Calvillo, Mater. Sci. Eng. A 538, 236-245 (2012).
• [3] N. D. Ryan, H. J. McQueen, J. J. Jonas, Can. Metall. Q. 22, 369-378 (1983).
• [4] A. Järvenpä, M. Jaskari, J. Man, L.P . Karjalainen, Mater. Charact. 127, 12-26 (2017).
• [5] H. R. Bakhsheshi-Rad, B. Haerian, A. Najafizadeh, M. H Idris, M. R. A. Kadir, E. Hamzah, M. Daroonparvar, Can. Metall. Q. 52, 449-457 (2013).
• [6] M. Naghizadeh, H. Mirzadeh, Metall. Mater. Trans. A 47, 4210-4216 (2016).
• [7] D. M. Xu, G. Q. Lia, X. L. Wan, R. L. Xiong, G. Xu, K. M. Wu, M. C. Somani, R. D. K. Misra, Mater. Sci. Eng. A 688, 407-415 (2017).
• [8] A. Kisko, A. S. Hamada, J. Talonen, D. Porter, L. P. Karjalainen, Mater. Sci. Eng. A 657, 359-370 (2016).
• [9] C. Y. Lee, C. S. Yoo, A. Kermanpur, Y. K. Lee, J. Alloy Compd. 583, 357-360 (2014).
• [10] P. Dastur, A. Zarei-Hanzaki, M. H. Pishbin, M. Moallemi, H. R. Abedi, Mater. Sci. Eng. A 696, 511-519 (2017).
• [11] H. Kotan, K. A. Darling, Mater. Sci. Eng. A 686, 168-175 (2017).
• [12] C. Lei, X. Deng, X. Li, Z. Wang, G. Wang, R. D. K. Misra, J. Alloy Compd. 689, 718-725 (2016).
• [13] M. El-Tahawy, Y. Huang, H. Choi, H. Choe, J. L. Lábár, T. G. Langdon, J. Gubicza, Mater. Sci. Eng. A 682, 323-331 (2017).
• [14] F. Borgioli, E. Galvanetto, T. Bacci, Vacuum 127, 51-60 (2016).
• [15] K. Spencer, J. D. Embury, K. T. Conlon, M. Veron, Y. Brechet, Mater. Sci. Eng. A 387-389, 873-81 (2004).
• [16] M. Shirdel, H. Mirzadeh, M. H. Parsa, Mater. Charact. 103, 150-161 (2015).
• [17] H. Mirzadeh and A. Najafizadeh, J. Alloy Compd. 476, 352-355 (2009).
• [18] J. R. McDermid, H. S. Zurob, Y. Bian, Metall. Mater. Trans. A 42, 3627-3637 (2011).
• [19] X. L. Wu, M. X. Yang, F. P. Yuan, L. Chen, Y. T. Zhu, Acta Mater. 112, 337-346 (2016).
• [20] H. Mirzadeh, Metall. Mater. Trans. A 46, 4027-4037 (2015).
• [21] B. Fultz and J. Howe, Transmission Electron Microscopy and Diffractometry of Materials, 3rd ed., 2008 Springer, Berlin.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).