Product quality assessment – measurement and analysis of surface topography

• Autorzy: Niemczewska-Wójcik M. , Sładek J. , Tabaka M. , Wójcik A.

Identyfikatory

DOI

10.2478/mms-2014-0023

• Języki publikacji: EN

Abstrakty

EN

This paper concerns the issues of measurement techniques, analysis and assessment of the machined surface geometric structure. The aim of this work was to show the application of surface analysis in diagnosing the causes of discrepancies occurring in the manufacturing process, which may result from ill-matched (poorly fitting) process parameters. An appropriate system of control and interpretation of results may allow early reaction to unfavorable trends (for example blunting of the tool) and prevention of undesirable defects. The subject of research was a waste basket used in the construction of retaining sewer systems. In this paper, the quality of the waste basket as well as its manufacturing process were analyzed and assessed. The research was carried out with the use of three measurement stands, i.e. optical microscopy (OM), scanning electron microscopy (SEM) and white light interferometer (WLI). The surface analysis proved to be important from the viewpoint of outlining the production process as well as improving the product quality. The software used for topographical analysis appeared to be significant for the success of the analysis, providing notable economic effects, namely the lack of defects.

Słowa kluczowe

EN

surface metrology; topography; measurement devices; analysis of defects; quality

• Wydawca: Komitet Metrologii i Aparatury Naukowej PAN
• Czasopismo: Metrology and Measurement Systems
• Rocznik: 2014
• Tom: Vol. 21, nr 2
• Strony: 271--280
• Opis fizyczny: Bibliogr. 16 poz., rys., tab., wykr.

Twórcy

autor

Niemczewska-Wójcik M.

• Cracow University of Technology, Institut of Production Engineering, Jana Pawła II No.37, 31-864 Cracow, Poland

autor

Sładek J.

• Cracow University of Technology, Coordinate Metrology Laboratory, Jana Pawła II No.37, 31-864 Cracow, Poland

autor

Tabaka M.

• Cracow University of Technology, Coordinate Metrology Laboratory, Jana Pawła II No.37, 31-864 Cracow, Poland

autor

Wójcik A.

• University of Agriculture in Cracow, Department of Mechanical Engineering and Agrophysics, Balicka No. 120, 30-149 Cracow, Poland

Bibliografia

• [1] Lubimov, V., Oczoś, K.E. (2003). Surface geometric structure. Rzeszow: Publishing House of Rzeszow University of Technology.
• [2] Pawlus, P. (2006). Surface topography - measurement, analysis, influence. Rzeszow: Publishing House of Rzeszow University of Technology.
• [3] Stout, K. J., Blunt, L. (2000). Three dimensional surface topography. London: Penton Press.
• [4] Wieczorowski, M. (2009). Surface topography analysis. Poznan: Publishing House of Poznan University of Technology.
• [5] Whitehouse, D. J. (1994). Handbook of surface metrology. Bristol - Philadelphia: Institute of Physics Publishing.
• [6] Humienny, Zb. - ed. (2004). Geometrical Product Specification (GPS) - European Handbook. Warsaw: WNT.
• [7] Dong, P. W., Sullivan, P. J., Stout, K. J. (1992). Comprehensive study of parameters for characterizing three dimensional surface topography. Wear 159 (2), 161-171.
• [8] Nowicki, B. (1993). Measurements of surface roughness. Mechanic 1, 29-32.
• [9] Żebrowski, H. (2004). Manufacturing techniques. Wroclaw: Publishing House of Wroclaw University of Technology.
• [10] Mathia, T., Pawlus, P., Wieczorowski M. (2011). Recent trends in surface metrology. Wear 271 (3-4), 494-508.
• [11] Niemczewska-Wójcik, M. (2011). The influence of the surface geometric structure on the functionality of implants. Wear, 2011, 271.3: 596-603.
• [12] Niemczewska-Wójcik, M., Gawlik, J.; Sładek, J. (2013). The measurement and analysis of surface geometric structure of ceramic femoral heads. Scanning, DOI: 10.1002/sca.21106.
• [13] Wieczorowski, M., Mrożek, R., Andralojc, P. (2010). The use of surface asperities analysis to investigate wear of bodies in contact on example of brake elements. Metrology and Measurement Systems, 17(2), 271-278.
• [14] Żółtowski, B. (1996). Machine diagnostics. Bydgoszcz: Publishing House of University of Technology and Life Sciences in Bydgoszcz.
• [15] Dobrzański, L. (2006). Engineering materials and materials design. Warsaw: WNT.
• [16] Blunt, L., Xiangqiqn, J. - eds. (2003). Advanced techniques for assessment of surface topography. London: Kogan Page Science.