PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Potential of ethanol and butanol in reducing deposits of SIDI engine injectors

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The operation of conventional (hydrocarbon) fuels causes certain effects in the internal combustion engine. Despite the satisfactory efficiency of internal combustion engines, their fuel systems, particularly the injectors, are subject to constant fouling. The article analyzes the possibility of reducing the deposit of high-pressure gasoline injectors using the alcohol addition of ethanol and butanol. The study was conducted under the engine and non-engine conditions. Fuel injection timing was analyzed when fueling with different mixtures, and non-engine analyses were conducted to determine changes affecting the injectors. The results indicate the possibility of reducing injector hole coking using ethanol and butanol as a 20% additive to the base fuel.
Czasopismo
Rocznik
Strony
21--31
Opis fizyczny
Bibliogr. 26 poz., il. kolor., fot., rys., wykr.
Twórcy
  • Faculty of Civil and Transport Engineering, Poznan University of Technology, Poland
  • Faculty of Civil and Transport Engineering, Poznan University of Technology, Poland
  • Performance Testing Department, Oil and Gas Institute - National Research Institute, Poland
Bibliografia
  • [1] Ashida T, Takei Y, Hosi H. Effects of fuel properties on SIDI fuel injector deposit. SAE Technical Paper 2001-01-3694, 2001. https://doi.org/10.4271/2001-01-3694
  • [2] Castagliola MM, De Simio L, Iannaccone S, Prati MV. Combustion efficiency and engine-out emissions of a SI engine fueled with alcohol/gasoline blends. Appl Energy. 2013;111:1162-1171. https://doi.org/10.1016/j.apenergy.2012.09.042
  • [3] Czerwinski J, Comte P, Stepien Z, Oleksiak S. Effects of ethanol blend fuels E10 and E85 on the non‐legislated emissions of a flex fuel passenger car. SAE Technical Paper 2016-01-0977, 2016. https:/doi.org/10.4271/2016‐01‐0977
  • [4] Directive 2003/30/EC of the European Parliament and of the Council of 8 May 2003 on the promotion and the use of bio-fuels or other renewable fuels for transport. https://eur-lex.europa.eu/legal-content/EN/ALL/?uri=CELEX:32003L0030
  • [5] Directive (EU) 2018/2001 of the European Parliament and of the Council of 11 December 2018 on the promotion of the use of energy from renewable sources. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32018L2001
  • [6] DuMont RJ, Cunningham LJ, Oliver MK, Studzinski MK, Galante-Fox JM. Controlling induction system deposits in flexible fuel vehicles operating on E85. 2007. SAE Technical Paper 2007-01-4071, 2007. https://doi.org/10.4271/2007-01-4071
  • [7] DuMont RJ, Evans JA, Feist DP, Studzinski WM, Cushing TJ. Test and control of fuel injector deposits in direct injected spark ignition vehicles. SAE Technical Paper 2009-01-2641, 2009. https://doi.org/10.4271/2009-01-2641
  • [8] Fourier E, Simon G, Seers P. Evaluation of low concentrations of ethanol, buthanol BE, and ABE with gasoline direct-injection, spark-ignition engine. Fuel. 2016;181:396-407. https://doi.org/10.1016/j.fuel.2016.04.135
  • [9] Galloni E, Fontana G, Staccone S, Scala F. Performance analyses of a spark-ignition engine firing with gasoline-butanol blends at partial load operation. Energy Convers Manag. 2016;110:319-326. https://doi.org/10.1016/j.enconman.2015.12.038
  • [10] Hergueta C, Bogarra M, Tsolakis A, Essa K, Herreros JM. Butanol-gasoline blend and exhaust gas recirculation, impact on GDI engine emissions. Fuel. 2017;208:662-672. https://doi.org/10.1016/j.fuel.2017.07.022
  • [11] Joedicke A, Krueger-Venus J, Bohr P, Cracknell R, Doyle D. Understanding the effect of DISI injector deposits on vehicle performance. SAE Technical Paper 2012-01-0391, 2012. https://doi.org/10.4271/2012-01-0391
  • [12] Kale R, Banerjee R. Optical investigation of flash boiling and its effect on in-cylinder combustion for butanol isomers and iso-octane. Int J Engine Res. 2021;22(5):1565-1578. https://doi.org/10.1177/1468087420917241
  • [13] Lee S, Oh Y, Park S. Characterization of the spray atomization process of a multi-hole gasoline direct injector based on measurements using a phase Doppler particle analyser. Proc Inst Mech Eng Part D J Automob Eng. 2013;227(7):951-965. https://doi.org/10.1177/0954407013483244
  • [14] Mitroglou N, Nouri JM, Yan Y, Gavaises M, Arcoumanis C. Spray structure generated by multi-hole injectors for gasoline direct injection engines. SAE Technical Paper 2007-01-1417, 2007. https://doi.org/10.4271/2007-01-1417
  • [15] Moon S, Huang W, Li Z, Wang J. End-of-injection fuel dribble of multi-hole diesel injector: Comprehensive investigation of phenomenon and discussion on control strategy. Appl Energy. 2016;179:7-16. https://doi.org/10.1016/j.apenergy.2016.06.116
  • [16] Regulation (EU) 2019/631 of the European Parliament and of the Council of 17 April 2019 setting CO2 emission performance standards for new passenger cars and for new light commercial vehicles, and repealing Regulations (EC) No 443/2009 and (EU) No 510/2011. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32019R0631
  • [17] Rubio-Gomez G, Corral-Gomez L, Rodriguez-Rosa D, Sanchez-Cruz FA, Martinez-Martinez S. A comparative study of the effect of compression ratio on the efficiency and flame development angle in a cooperative fuel research engine fueled with binary gasoline-alcohol blends. Int J Engine Res. 2021;22(2):569-580. https://doi.org/10.1177/1468087419859104
  • [18] Russell M, Cummings J, Cushing T, Studzinski W. Cellulosic ethanol fuel quality evaluation and its effects on PFI in-take valve deposits and GDI fuel injector plugging performance. SAE Technical Paper 2013-01-0885, 2013. https://doi.org/10.4271/2013-01-0885
  • [19] Singh AP, Sharma N, Kumar V, Agarwal AK. Experimental investigations of mineral diesel/methanol fueled reactivity controlled compression ignition engine operated at variable engine loads and premixed ratios. Int J Engine Res. 2021; 22(7):2375-2389. https://doi.org/10.1177/1468087420923451
  • [20] Skogsberg M, Dahlander P, Lindgren R, Denbratt I. Effects of injector parameters on mixture formation for multi-hole nozzles in a spray-guided gasoline DI engine. SAE Technical Paper 2005-01-0097, 2005. https://doi.org/10.4271/2005-01-0097
  • [21] Song H, Xiao J, Chen Y, Huang Z. The effects of deposits on spra,y behaviors of a gasoline direct injector. Fuel. 2016;180: 506-513. https://doi.org/10.1016/j.fuel.2016.04.067
  • [22] Stępień Z. Utility-exploitation potential of butanol as an alternative fuel designed for car SI engines. Nafta-Gaz. 2020;2:126-135. http://doi.org/10.18668/NG.2020.02.07
  • [23] Stępień Z, Pielecha I, Cieślik W, Szwajca F. The impact of alcohol admixture with gasoline on carbon buildup and fuel injectors performance. Eksploat Niezawodn. 2022;24(2): 226-236. https://doi.org/10.17531/ein.2022.2.4
  • [24] Taniguchi S, Yoshida K, Tsukasaki Y. Feasibility study of ethanol applications to a direct injection gasoline engine. SAE Technical Paper 2007-01-2037, 2007. https://doi.org/10.4271/2007-01-2037
  • [25] Wang B, Badawy T, Jiang Y, Xu H, Ghafourian A, Hang X. Investigation of deposit effect on multi-hole injector spray characteristics and air/fuel mixing process. Fuel. 2017; 191:10-24. https://doi.org/10.1016/j.fuel.2016.11.055
  • [26] Xu H, Wang C, Ma X, Sarangi AK, Weall A, Krueger-Venus J. Fuel injector deposits in direct-injection spark-ignition engines. Prog Energy Combust Sci. 2015;50:63-80. https://doi.org/10.1016/j.pecs.2015.02.002
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-00d616c5-180c-461d-9875-931a26ae01a5
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.