Assessment of the technical condition of prefabricated elements using the acoustic emission method

• Autorzy: Krampikowska Aleksandra , Adamczak-Bugno Anna

Identyfikatory

DOI

10.22630/PNIKS.2019.28.3.33

• Języki publikacji: EN

Abstrakty

EN

The article presents the results of tests using the acoustic emission method during the formation process of T-27 prestressed concrete beams. The studies included two stages. The first – testing the compressive strength of the cubic samples taken from the trial batch used for the production of beams together with the acquisition of acoustic emission signals. The second – measurements by acoustic emission, on the actual construction element during accelerated maturation of concrete caused by heating. The undertaking of the above subject results from the fact that this issue is of great importance when assessing the durability of reinforced concrete and pre-compressed elements in the aspect of the analysis of these structures in terms of durability. The impact of material degradation on the durability of the structure is difficult to appraise due to the lack of reliable results needed to estimate the durability of the selected statistical approach. However, the use of the acoustic emission method based on the identification of destructive processes creates the possibility of locating, identifying and monitoring the emerging and developing destructive processes affecting the durability of concrete elements.

Słowa kluczowe

EN

acoustic emission; diagnostic method; prestressed beams; durability

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Przegląd Naukowy Inżynieria i Kształtowanie Środowiska
• Rocznik: 2019
• Tom: Vol. 28, No. 3
• Strony: 356--365
• Opis fizyczny: Bibliogr. 27 poz., rys., tab., wykr., zdj.

Twórcy

autor

Krampikowska Aleksandra

• Politechnika Świętokrzyska, Wydział Budownictwa i Architektury, al. 1000-lecia Państwa Polskiego 7 25-314 Kielce, Poland

autor

Adamczak-Bugno Anna

• Politechnika Świętokrzyska, Wydział Budownictwa i Architektury, al. 1000-lecia Państwa Polskiego 7 25-314 Kielce, Poland

Bibliografia

• Goszczyńska, B. (2014). Analysis of the process of crack initiation and evolution in concrete with acoustic emission testing. Archives of Civil and Mechanical Engineering, 14(2), 134-143.
• Goszczyńska, B., Świt, G. & Trąmpczyński, W. (2013). Monitoring of active destructive processes as a diagnostic tool for the structure technical state evaluation. Bulletin of the Polish Academy of Sciences, Technical Sciences, 61(1), 97-109.
• Goszczyńska, B., Świt, G. & Trąmpczyński, W. (2014). Assessment of the technical state of large size steel structures under cyclic load with the acoustic emission method – IADP. Journal of Theoretical and Applied Mechanics, 52(2), 289-299.
• Goszczyńska, B., Świt, G. & Trąmpczyński, W. (2015). Analysis of the microcracking process with the Acoustic Emission method with respect to the service life of reinforced concrete structures with the example of the RC beams. Bulletin of the Polish Academy of Sciences: Technical Sciences, 63(1), 55-65.
• Goszczyńska, B., Świt, G. & Trąmpczyński, W. (2016). Application of the IADP acoustic emission method to automatic control of traffic on reinforced concrete bridges to ensure their safe operation. Archives of Civil and Mechanical Engineering, 16(4), 867-875.
• Goszczyńska, B., Świt, G., Trąmpczyński, W. & Krampikowska, A. (2010). Application of the acoustic emission (AE) method to bridge testing and diagnostics comparison of procedures. IEEE Xplore - IEEE Proceedings, 1-10.
• Hsieh, K.H., Halling, M.W. & Barr, P.J. (2006). Overview of vibrational structural health monitoring with representative case studies. Journal of Bridge Engineering, 11(6), 707-715.
• Lee, H.K., Lee, K.M., Kim, Y.H. & Bea, D.B. (2004). Ultrasonic in-situ monitoring of setting process of high performance concrete. Cement and Concrete Research, 34(4), 631-640.
• McCarter, W.J. & Vennesland, R. (2004). Sensor systems for use in reinforced concrete structures. Construction and Building Materials, 18(6), 351-358.
• Minh Chinh, L., Adamczak, A., Krampikowska, A. & Świt, G. (2016). Dragon bridge - the world largest dragon-shaped (ARCH) steel bridge as element of smart city. E3S Web of Conferences, 10, 1-5.
• Nagy, A. (1997). Determination of E-modulus of young concrete with nondestructive method. Journal of Materials in Civil Engineering, 9(1), 15-20.
• Olaszek, P., Świt, G. & Casas, J.R. (2016). On-site assessment of bridges supported by acoustic emission. Proceedings of the Institution of Civil Engineers – Bridge Engineering, 169(2), 81-92.
• Pascale, G., Leo, A.D. & Bonora, V. (2003). Non- -destructive assessment of the actual compressive strength of high-strength concrete. Journal of Materials in Civil Engineering, 15(5), 452-459.
• Paulson, P.O. & Dwit, M. (2003). The use of acoustic monitoring to manage concrete structures. In Proceedings of the International Non-Destructive Testing in Civil Engineering Symposium, 8 [CD].
• Proverbio, E. & Venturi, V. (2005). Reliability of nondestructive tests for on site concrete strength assessment. In International Conférence On Durability of Building Materials and Components, Lyon 17-20.04.2005.
• Rens, K.L. & Greimann, L.F. (1997). Ultrasonic approach for nondestructive testing of civil infrastructure. Journal of Performance of Constructed Facilities, 11(3), 97-104.
• Rens, K.L. & Kim, T. (2007). Inspection of Quebec street bridge in Denver, Colardo: destructive and nondestructive testing. Journal of Performance of Constructed Facilities, 21(3), 215-224.
• Rens, K.L., Nogueira, C.L. & Transue, D.J. (2005). Bridge management and nondestructive evaluation. Journal of Performance of Constructed Facilities, 19(1), 3-16.
• Sharma, S. & Mukherje, A. (2011). Monitoring corrosion in oxide and chloride environments using ultrasonic guided waves. Journal of Materials in Civil Engineering, 23(2), 207-211.
• Świt, G. (2004). Evaluation of compliance changes in concrete beams reinforced by glass fiber reinforced plastics using acoustic emission. Journal of Materials in Civil Engineering, 16(5), 414-418.
• Świt, G. (2009). Diagnostics of prestressed concrete structures by means of acoustic emission. IEEE Xplore – IEEE Proceedings, 2, 958-962.
• Świt, G. (2018). Acoustic emission method for locating and identifying active destructive processes in operating facilities. Applied Sciences, 8(1295), 1-20.
• Świt, G., Adamczak-Bugno, A. & Krampikowska A. (2019a). Bridge management system within the strategic roads as an element of smart city. IOP Conference Series: Earth and Environmental Science, 214(1), 1-9.
• Świt, G., Adamczak-Bugno, A. & Krampikowska, A. (2019b). Application of the acoustic emission method in the assessment of the technical condition of steel structure. IOP Conference Series: Earth and Environmental Science, 214(012055), 1-10.
• Świt, G., Krampikowska, A. & Minh Chinh, L. (2016). A prototype system for acoustic emission-based structural health monitoring of My Thuan Bridge. Proceedings of 2016 Prognostics and System Health Management Conference (PHM-Chengdu), 624-630.
• Świt, G., Krampikowska, A., Minh Chinh, L. & Adamczak, A. (2016). Nhat Tan Bridge – the biggest cable-stayed bridge in Vietnam. Procedia Engineering, 161, 666-673.
• Yehia, S., Abudayyeh, O., Nabulsi, S. & Abdelqader, I. (2007). Detection of common defects in concrete bridge decks using non-destructive evaluation techniques. Journal of Bridge Engineering, 12(2), 215-224.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).