Simulation of helical gear forming of AZ31 magnesium material

• Autorzy: Ayer Ö.

Identyfikatory

DOI

10.12913/22998624/70998

• Języki publikacji: EN

Abstrakty

EN

The simulation of helical gear forming is investigated in this study. AZ31 type magnesium material was selected for workpiece material because of its high specific strength. The finite element method was used to simulate the closed die upsetting method for magnesium material of helical gear upsetting. Three dimensional finite element analyses were carried out to obtain the forming load, effective stress, effective strain and temperature change with DEFORM-3D software.

Słowa kluczowe

EN

AZ31; gear forming; helical gears; FEM; DEFORM 3D

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2017
• Tom: Vol. 11, no 2
• Strony: 187--191
• Opis fizyczny: Bibliogr. 21 poz., fig.

Twórcy

autor

Ayer Ö.

• Trakya University, Department of Mechanical Engineering, Edirne, Turkey

Bibliografia

• 1. T. Altinbalik, O. Ayer, Effect of die inlet geometry on extrusion of clover sections through curved dies: Upper bound analysis and experimental verification, Trans. Nonferrous Met. Soc. China (English Ed. 23 (2013) 1098–1107.
• 2. T. Altinbalik, Ö. Ayer, A theoretical and experimental study for the load optimization of gear-like profiles by using forward and lateral extrusion, Trans. Can. Soc. Mech. Eng. 39 (2015) 53–69.
• 3. T. Altinbalik, Y. Can, An experimental study of lateral extrusion of splines, Mater. Des. 27 (2006) 727–734.
• 4. B.-A. Behrens, E. Doege, Cold Sizing of Cold- and Hot-Formed Gears, CIRP Ann. - Manuf. Technol. 53 (2004) 239–242.
• 5. B.A. Behrens, I. Pfeiffer, J. Knigge, Forging technology for magnesium alloys, in: Adv. Wrought Magnes. Alloy. Fundam. Process. Prop. Appl., 2012: pp. 376–389.
• 6. S. Bingol, The Decreasing of the Extrusion Time with Varying Ram Speed, Mater. Manuf. Process. 30 (2015) 1185–1189.
• 7. S. Bingöl, Ö. Ayer, T. Altinbalik, Extrusion load prediction of gear-like profile for different die geometries using ANN and FEM with experimental verification, Int. J. Adv. Manuf. Technol. 76 (2014) 983–992.
• 8. S. Bingöl, W. Misiolek, Prediction of the true stress of ZE20 magnesium alloy at different temperatures and strain rates, Stroj. Vestnik/Journal Mech. Eng. 61 (2015) 610–617.
• 9. J. Cai, T.A. Dean, Z.M. Hu, Alternative die designs in net-shape forging of gears, J. Mater. Process. Technol. 150 (2004) 48–55.
• 10. D.C. Chen, S.K. Syu, C.H. Wu, S.K. Lin, Investigation into cold extrusion of aluminum billets using three-dimensional finite element method, J. Mater. Process. Technol. 192–193 (2007) 188–193.
• 11. N.R. Chitkara, M.A. Bhutta, Near-net shape forging of spur gear forms: An analysis and some experiments, Int. J. Mech. Sci. 38 (1996) 891–916.
• 12. J.C. Choi, Y. Choi, A study on the forging of external spur gears: upper-bound analyses and experiments, Int. J. Mach. Tools Manuf. 38 (1998) 1193–1208.
• 13. E. Doege, R. Bohnsack, Closed die technologies for hot forging, J. Mater. Process. Technol. 98 (2000) 165–170.
• 14. W. Guo, Q. Wang, B. Ye, H. Zhou, Microstructure and mechanical properties of AZ31 magnesium alloy processed by cyclic closed-die forging, J. Alloys Compd. 558 (2013) 164–171.
• 15. C.J. Luis Pérez, D. Salcedo Pérez, I. Puertas Arbizu, Design and mechanical property analysis of ultrafine grained gears from AA5083 previously processed by equal channel angular pressing and isothermal forging, Mater. Des. 63 (2014) 126–135.
• 16. U.C. Paltasingh, S.K. Sahoo, P.R. Das, K.C. Nayak, S. Potnuru, Lateral extrusion of spur gears with involute profile: Finite element analysis and experimental investigation, 3 (2013) 20–30.
• 17. Z. Pater, A FEM Analysis of Cross-Wedge Rolling of Toothed Shafts, 15 (2011) 50–58.
• 18. Z. Pater, A. Gontarz, A. Tofil, Analysis of the cross-wedge rolling process of toothed shafts made from 2618 aluminium alloy, J. Shanghai Jiaotong Univ. 16 (2011) 162–166.
• 19. W. Wang, J. Zhao, R. Zhai, A forming technology of spur gear by warm extrusion and the defects control, J. Manuf. Process. 21 (2016) 30–38.
• 20. R. Werkhoven, D. Kobold, K. Kuzman, D.D. Centre, Analyses of Warm Magnesium Forging in Digital Environment, 35 (2015) 13–24.
• 21. W. Xu, X. Zhao, D. Shan, J. Li, Q. Deng, X. Cui, et al., Numerical simulation and experimental study on multi-pass stagger spinning of internally toothed gear using plate blank, J. Mater. Process. Technol. 229 (2015) 450–466.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)