Electrical interface for a self-powered MR damper-based vibration reduction system

• Autorzy: Jastrzębski Ł. , Sapiński B.

Identyfikatory

DOI

10.1515/ama-2016-0025

• Języki publikacji: EN

Abstrakty

EN

The study investigates the behaviour of an electrical interface incorporated in a MR damper-based vibration reduction system powered with energy recovered from vibration. The interface, comprising the R, L and C elements, is connected in between the coil in an electromagnetic electric generator and the control coil in the MR damper and its function is to convert the output voltage from the generator. The interface model was formulated and computer simulations were performed to find out how the parameters of the interface should influence the frequency responses of the vibration reduction system.

Słowa kluczowe

EN

vibration; electrical interface; MR damper; energy harvesting

PL

wibracja; tłumik MR; symulacja komputerowa; redukcja wibracji

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2016
• Tom: Vol. 10, no. 3
• Strony: 165--172
• Opis fizyczny: Bibliogr. 14 poz., rys., wykr.

Twórcy

autor

Jastrzębski Ł.

• Mechanical Engineering and Robotics, Department of Process Control, University of Science and Technology, al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Sapiński B.

• Mechanical Engineering and Robotics, Department of Process Control, University of Science and Technology, al. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• 1. Cho S. W., Jung H. J., Lee I. W. (2005), Smart passive system based on a magnetorheological damper, Smart Materials and Structures, 14, 707-714.
• 2. Cho S. W., Jung H. J., Lee I. W. (2007a), Feasibility study of smart passive control system equipped with electromagnetic induction device, Smart Materials and Structures, 16, 2323-2329.
• 3. Choi K. M., Jung H. J., Lee I. W., Cho S. W. (2007b), Feasibility study of an MR damper-based smart passive control system employing an electromagnetic induction device, Smart Materials and Structures, 16, 2323¬–9.
• 4. Choi Y. T., Werely N. M. (2009), Self-powered magnetorheological dampers, Journal of Vibration Acoustics, 131, 44–50.
• 5. Guo S., Yang S., Pan C. (2006), Dynamic modeling of magnetorheological damper behaviors, Journal of Intelligent Material Systems and Structures, 17, 1, 3-14.
• 6. Kwok N.M, Ha Q.P., Nguyen T.H., Li J., Samali B. (2006), A novel hysteretic model for magnetorheological fluid dampers and parameter identification using particle swarm, Sensors and Actuators A, 132, 441-451.
• 7. Rosół M., Sapiński B., Jastrzębski Ł. (2010), Laboratory testing of signal conditioning systems in an electromagnetic generator to power-supply an MR damper, Measurement, Automation, Monitoring, 56(10), 1228-1233 (in Polish).
• 8. Sapinski B. (2008), An experimental electromagnetic induction device for a magnetorheological damper, Journal of Theoretical and Applied Mechanics, 46(4), 933-947.
• 9. Sapiński B. (2011), Experimental study of a self-powered and sensing MR-damper-based vibration control system, Smart Materials and Structures, 20, 105007.
• 10. Sapiński B. (2014), Energy-harvesting linear MR damper: prototyping and testing, Smart material and Structures, 23, 035021.
• 11. Sapiński B., Jastrzębski Ł., Węgrzynowski M. (2011), Modelling of a self-powered vibration reduction system, Modelling in Engineering, 10(41), 353-362 (in Polish).
• 12. Sapiński B., Rosół M., Węgrzynowski M. (2016), Evaluation of an energy harvesting mr damper-based vibration reduction systemstem, Journal of Theoretical and Applied Mechanics, 54(2), 333-344.
• 13. Snamina J., Sapinski B. (2011), Energy balance in self-powered MR damper-based vibration reduction system, Bulletin of the Polish Academy of Sciences Technical Sciences, 59(1), 75−80.
• 14. Wang D. H., Bai X. X., Liao W H. (2009), Principle, design and modeling of an integrated relative displacement magnetorheological damper based on electromagnetic induction, Smart Materials and Structures, 18, 095025.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.