Effect of the content of corn stalk fibres and additional heat treatment on properties of eco-friendly fibreboards bonded with lignosulphonate

• Autorzy: Mihajlova Julia , Savov Viktor , Simeonov Tsvetan

Identyfikatory

DOI

10.12841/wood.1644-3985.395.06

• Języki publikacji: EN

Abstrakty

EN

This study aims to find the possibility of producing eco-friendly thin Medium Density Fibrepanels (MDF) with the participation of corn stalk fibres and using lignosulphonate as a bio-based binder. The main novelty in the research is the establishment of the effect of additional heat treatment on the properties of MDF manufactured with the participation of non-wood lignocellulosic raw materials and bonded with bio-based adhesive – lignosulphonate. Panels with 15% lignosulphonate content and variation of the content of corn stalk fibres from 0% to 30% were manufactured. Previous experiments showed that when only lignosulfonate is used as a binder, the manufactured panels generally have low waterproofness. To reduce the effect of this main disadvantage, the panels were subjected additionally to heat treatment. The properties of the MDF with and without additional heat treatment were compared. The effect of both the content of corn stalk fibres and the additional heat treatment was found. As a whole, the additional heat treatment improves the properties of MDF produced with lignosulphonate. Still, in case of increased content of corn stalk fibres, it is necessary to apply softened regimes than the ones selected for this study.

Słowa kluczowe

EN

dry-process fibreboards; eco-friendly; corn stalk fibres; lignosulphonate; additional heat treatment

• Wydawca: Sieć Badawcza Łukasiewicz - Poznański Instytut Technologiczny
• Czasopismo: Drewno : prace naukowe, doniesienia, komunikaty
• Rocznik: 2022
• Tom: Vol. 65, nr 209
• Strony: art. no. 1644--3985.395.06
• Opis fizyczny: Bibliogr. 66 poz., tab., wykr.

Twórcy

autor

Mihajlova Julia

• University of Forestry, Sofia, Bulgaria

autor

Savov Viktor

• University of Forestry, Sofia, Bulgaria

• https://orcid.org/0000-0001-5111-8760

autor

Simeonov Tsvetan

• University of Forestry, Sofia, Bulgaria

Bibliografia

• Abdellatif B., Hugo, V. Xavier, R. [2013]: Dry fractionation process as an important step in current and future lignocellulose biorefineries: A review. Bioresource Technology 134: 362-373
• Abou-State M.A., Zimaity T., El-Masry A.M. [1973]: Pulp and Paper from Corn Stalks. Journal of Applied Chemistry and Biotechnology 23: 511-516
• Akgül M., Uner B., Çamlibel O., Ayata Ü. [2017]: Manufacture of Medium Density Fiberboard (MDF) Panels from Agri Based Lignocellulosic Biomass. Wood Research 62 [4]: 615-624
• Altgen M., Willems W., Militz H. [2016]: Wood degradation affected by process conditions during thermal modification of European beech in a high-pressure reactor system. European Journal of Wood Products 74: 653–662
• Antov P., Savov V. [2019]: Possibilities for Manufacturing Eco-friendly Medium Density Fibrepanels from Recycled Fibres – a Review. Proceedings of 30th International Conference on Wood Science and Technology - ICWST 2019 “IMPLEMENTATION OF WOOD SCIENCE IN WOODWORKING SECTOR” & 70th Anniversary of Drvna industrija Journal, 12th – 13th December, Zagreb, Croatia:18-24
• Antov P., Valchev I., Savov V. [2019]: Experimental and statistical modeling of the exploitation properties of eco-friendly MDF trough variation of lignosulfonate concentration and hot pressing temperature. Proceedings of IWBLCM conference, 4-7 June, Cordoba, Spain: 104-109
• Antov P., Savov V., Mantanis G.I., Neykov N. [2020a]: Medium-density fibreboards bonded with phenolformaldehyde resin and calcium lignosulfonate as an eco-friendly additive. Wood Material Science and Engineering. Taylor & Francis publishing house
• Antov P., Jivkov V., Savov V., Simeonova R., Yavorov N. [2020b]: Structural Application of Eco-Friendly Composites from Recycled Wood Fibres Bonded with Magnesium Lignosulfonate. Applied Science 10 [21]: 7526
• Antov P., Krišák Ĺ., Réh R., Savov V., Papadopulus A.N. [2021]: Eco-Friendly Fiberboard Panels from Recycled Fibers Bonded with Calcium Lignosulfonate. Polymers 13 [4]: 639
• Arenas-Cárdenas P., López-Lópes A., Moeller-Chávez G. E., León-Becerril E. [2017]: Current Pretreatments of Lignocellulosic Residues in the Production of Bioethanol. Waste Biomass Valorization 8: 161-181
• Back E.L. [1987]: The bonding mechanism in hardboard manufactured – review report. Holzforschung 41[4]: pp. 247-258
• Bekhta P., Scala E.A., Kozak R. [2018]: Properties of wood-straw composites bonded with modified UF adhesive and pre-treated straw particles. Pro Ligno 14 [1]: 37-41
• Chad N., Fahim M. [2008]: Natural fibers and their composites. In: Woodhead Publishing Series in Composites Science and Engineering, Tribology of Natural Fiber Polymer Composites, Woodhead Publishing: 1-58
• Diop Ch.I.K., Tajvidi M., Bilodeau M.A., Bousfield D.W., Hunt J.F. [2017]: Evaluation of the incorporation of lignocellulose nanofibrils as sustainable adhesive replacement in medium density fiberboards. Industrial Crops and Products 109: 27-36
• Dunky M. [2020]: Wood Adhesives Based on Natural Resources: A Critical Review Part III. Tannin- and Lignin-Based Adhesives”, Reviews of Adhesion and Adhesives 8 [4]: pp. 379-525
• Esteves B.M., Pereira M.H. [2009]: Heat treatment of wood. BioResources 4 [1]: 370-404
• Fatma Sh., Hameed A., Noman M., Ahmed T., Shahid M., Tariq M., Sohail Im., Tabassum R. [2018]: Lignocellulosic Biomass: A Sustainable Bioenergy Source for the Future. Protein & Peptide Letters 25: 1-16
• Ferdosian F., Pan Z., Gao G., Zhao B. [2016]: Bio-Based Adhesives and Evaluation for Wood Composites Application. Polymers 9 [2] 70: 29
• Ferreira R.D.M., Brackmann R., Pereira E.B., Rocha R.D.C. [2020]: Corn Straw Residue: a Strategy for Lipase Immobilization. Applied Biochemistry and Biotechnology 190: 839–850
• Ghahri S., Mohebby B. Pizzi A., Mirshokraie Ah., Mansouri H.R. [2018]: Improving Water Resistance of Soy-Based Adhesives by Vegetable Tannins”. Journal of Polymers and the Environment 26 [5]: 1881–1890
• Gopalakrishnan, K., Kim, S., Ceylan, H. [2010]: Lignin Recovery and Utilization, ASCE, p.31
• Grigorov R., Mihajlova J., Savov V. [2020]: Physical and Mechanical Properties of Combined Wood-Based Panels with Participations of Particles from Vine Sticks in Core Layer. Innovation in Woodworking Industry and Engineering Design 1/2020, 17: 42-45
• Gu L., Ding T., Jiang N. [2019]: Development of wood heat treatment research and industrialization. Journal of Forestry Engineering 4 [4]: 1-11
• Halvarsson S., Edlund H., Norgren M. [2009]: Manufacture of non-resin wheat straw fibreboards. (2009). Industrial crops and products 29 [2-3]: 437–445
• Hemmilä V., Adamopoulos St., Karlsson O., Kumar A. [2017]: Development of sustainable bio-adhesives for engineered wood panels – A Review”, Royal Society of Chemistry Advances 7: 38604–38630
• Hemmila V., Hosseinpourpia R., Adamopoulos St., Eceiza A. [2020]: Characterization of Wood‑based Industrial Biorefinery Lignosulfonates and Supercritical Water Hydrolysis Lignin. Waste and Biomass Valorization 11: 5835–5845
• Hagel S., Saake B. [2020]: Fractionation of Waste MDF by Steam Refining. Molecules 25 [9]: 2165
• Ihnát V., Lübke H., Borůvka V., Babiak M., Schwartz J. [2015]: Straw pulp as a secondary lignocellulosic raw material and its impact on properties of insulating fibreboards. Part II: Preparation of insulated fibreboards with straw fibers. Wood Research 60 [2]: 235-246
• Iždinský J., Vidholdová Z., Reinprecht L. [2020]: Particlepanels from Recycled Wood. Forests 11 [11]: 1166
• Jivkov. V., Elenska-Valchanova D. [2019]: Mechanical Properties of Some Thin Furniture Structural Composite Materials. 30th International Conference on Wood Science and Technology (ICWST), 70th Anniversary of Drvna industrija Journal, IMPLEMENTATION OF WOOD SCIENCE IN WOODWORKING SECTOR, PROCEEDINGS, Zagreb, 12th - 13th December
• Jivkov V., Petrova B. [2020]: Challenges for furniture design with thin structural materials. IFC2020, VI. International Furniture Congress, 2-5 November 2020, Trabzon/Turkey: 113-123
• Kargarfard A., Jahan-Latibardi Ah. [2011]: The Performance of Corn and Cotton Stalks for Medium Density Fiberboard production. BioResources 6 [2]: 1147-1157
• Kozlowski R., Wladyka-Przybylak M. [2004]: Uses of Natural Fiber Reinforced Plastics. In: Wallenberger F.T., Weston N.E. (eds) Natural Fibers, Plastics and Composites. Springer, Boston, MA.: 249-274
• Lee, T.C., Mohd Pu’ad, N.A.D., Selimin, M.A., Manap, N., Abdullah, H.Z., Idris, M.I. [2020]: An overview on development of environmental friendly medium density fibreboard. Materials Today: proceedings 29 [1]: 52-57
• Li H., Qu Y., Xu J. [2015]: Microwave-Assisted Conversion of Lignin. In: Fang Z., Smith, Jr. R., Qi X. (eds). Production of Biofuels and Chemicals with Microwave. Biofuels and Biorefineries, vol 3. Springer, Dordrecht
• Lim J.Sh., Manan Z.A., Alwi S.R.W., Hashim H. [2012]: A review on utilization of biomass from rice industry as a source of renewable energy. Renewable and Sustainable Energy Reviews 16 [5]: 3084– 3094
• Limayem A., Ricke St.C. [2012]: Lignocellulosic biomass for bioethanol production: Current perspectives, potential issues and future prospects. Progress in Energy and Combustion Science 38 [4]: 449-467
• Mantanis G.I., Athanassiadou E., Nakos P., Coutinho A. [2004]: A New Process for Recycling Waste Fiberboards. Conference Proceedings of the 38th International Wood Composites Symposium:119-122
• Mo X., Cheng E., Wang D., Sun X.S. [2003]: Physical properties of medium-density wheat straw particleboard using different adhesives. Industrial Crops and Products 18 [1]:47-53
• Mohebby B., Ilbeighi F., Kazemi-Najafi S. [2008] Influence of hydrothermal modification of fibers on some physical and mechanical properties of medium density fiberboard (MDF). Holz Roh Werkst 66: 213–218
• Mirski R., Banaszak A., Bekhta P. [2021]: Selected Properties of Formaldehyde-Free Polymer-Straw Panels Made from Different Types of Thermoplastics and Different Kinds of Straw. Materials 14 [5] 1216:15
• Oliveira St., L. Freire T.P., Mendes L.M., Mendes R.F. [2017]: The Effect of Post-Heat Treatment in MDF Panels. Materials Research 20 [1]: 183-190
• Pizzi A., Papadopoulus A.N., Policardi F. [2020]: Wood Composites and Their Polymer Binders. Polymers 12 [5]
• Rahman N.S.A., Yhaya M.F., Azahari B., Ismail W.R. [2018]: Utilization of natural cellulose fibres in wastewater treatment. Cellulose 25: 4887–4903
• Ramos, D., El Mansouri, N. E., Ferrando, F., Salvadó, J. [2018]: All-lignocellulosic Fiberboard from Steam Exploded Arundo Donax L. Molecules 23[9] 2088: 12
• Sala M.C., Kowaluc G. [2020]: The influence of defibration pressure and fibres drying parameters on the properties of HDF made with recovered fibres. Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology 111: 143-159
• Savov V., Ivanova J. [2016]: Influence of the content of corn stalks and phenol-formaldehyde resin on some physical and mechanical properties of very hard fibreboards. Proceedings of 10th international science conference “Chip and chipless woodworking processes”, Zvolen, Slovakia: 171-179.
• Savov V., Mihajlova J. [2017a]: Influence of the content of lignosulfonate on physical properties of medium density fibreboards. PRO LIGNO 13 [4]: 247-251
• Savov V., Mihajlova J. [2017b]: Influence of the content of lignosulfonate on mechanical properties of medium density fibreboards. PRO LIGNO 13 [4]: 252-256
• Savov V. Mihajlova J., Grigorov R., Molev E. [2018]: Effect of participation of vine fibres on some physical and mechanical properties of fibreboards. Innovation in woodworking industry and engineering design 8: 44-52
• Savov V., Valchev I., Antov P. [2019]: Processing factors for production of eco-friendly medium density fibreboards based on lignosulfonate adhesives. Proceedings of IWBLCM conference, 4-7 June, Cordoba, Spain: 165-169
• Savov V., Mihajlova J., Yotov N., Madjarov B. [2020 a]: Influence of Hot-Pressing Temperature on Properties of Eco-Friendly Dry-Process Fibreboards with Lignosulfonate Adhesive. Proceedings of the Tenth International Scientific and Technical Conference “Innovation in Forest Industry and Engineering Design” – INNO 2020, 1-3 October 2020, Vitosha Park Hotel, Sofia, Bulgaria: 211-219
• Savov V., Valchev I., Yavorov N., Sabev K. [2020b]: Influence of press factor and additional thermal treatment on technology for production of eco-friendly MDF based on lignosulfonate adhesives. Bulgarian Chemical Communications, 52, Special Issue B: 48-52
• Savov V., Antov P. [2020]: Engineering the Properties of Eco-Friendly Medium Density Fibrepanels Bonded with Lignosulfonate Adhesive. Drvna Industrija 71 [2]: 157-162
• Thaeng D., Mansouri N.E., Arbat G., Ngo B., Delgado-Aguilar M., Pelach M.A., Fullana-i-Palmer P., Matje M. [2017]: Fiberpanels made from corn stalks thermomechanical pulp and kraft lignin as green adhesive”. BioResurses 12 [2]: 2379-2393
• Widsten P., Hummer A., Heathcote C., Kandelbauer A. [2009]: A preliminary study of green production of fiberboard bonded with tannin and laccase in a wet process. Holzforschung 63: 545–550
• Winandy J.E., Krzysik A.M. [2007]: Therma Degradation of Wood Fibers During Hot-Pressing of MDF Composites: Part I: Relative Effects and Benefits of Thermal Exposure. Wood and Fiber Science 39 [3]: 450–461
• Zhang Sh. [2019]: Study on the Preparation Process of Rice Straw Fiberboard for Packaging. IOP Conference Series: Earth and Environmental Science 233 [5] 052031: 5
• Zhang Y., Pizzi A., Delmotte L. [2003]: Wheat straw particleboard bonding improvements by enzyme pretreatment. Holz als Roh- und Werkstoff 61: 49–54
• U. S. Environmental Protection Agency. [2002]: Hardboard and Fiberboard Manufacturing. 10.6.4-8
• FAO [accessed 04.2021]. http://www.fao.org/forestry/statistics/
• AGROSTAT [accessed 05.2021]. Available from: https://www.agrostat.bg/ISASPublic
• List of standards
• EN 310:1999 European Committee for Standardization. Wood-based panels – determination of modulus of elasticity in bending and bending strength, Brussels.
• EN 317:1998 European Committee for Standardization. Particlepanels and fibreboards – determination of swelling in thickness after immersion in water, Brussels
• EN 323:2001 European Committee for Standardization. Wood-based panels – determination of density, Brussels
• EN 622-5:2010 European Committee for Standardization. “Fibrepanels – specifications – Part 5: Requirements for dry process panels”, Brussels

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).