Analysis of the dynamics of the rolling process of multilayer viscoelastic bodies

• Autorzy: Rydz Dariusz , Salwin Mariusz , Pałęga Michał , Chmielewski Tomasz

Identyfikatory

DOI

10.12913/22998624/195456

• Języki publikacji: EN

Abstrakty

EN

The paper identifies deformations in layers of laminated composite sheets shaped in the rolling process. Rolling process of layered composites is a dynamic issue, for which the problem is to precisely determine the value of deformations of individual sheet components resulting from differences in their properties. The aim of this work was to determine the impact of delayed viscoelastic effects on increasing the computational accuracy of deformations of metal layers constituting the AlMg5+Al1050+M1E layered composite. Three three-parameter Jeffreys models connected in parallel were used to analyze the course of changes in deformation of laminar composite layers. The presented test results refer to the determination of the deformation values in the rolling valley and the zone of delayed viscoelastic effects. The work showed that the solution used contributed to increasing the accuracy of the calculations.

Słowa kluczowe

EN

mathematical model; viscoelasticity; layered composites; rolling process

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2025
• Tom: Vol. 19, no. 2
• Strony: 63--72
• Opis fizyczny: Bibliogr. 41 poz., fig., tab.

Twórcy

autor

Rydz Dariusz

• Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, al. Armii Krajowej 19, 42-201 Czestochowa, Poland

• https://orcid.org/0000-0002-9985-8036

autor

Salwin Mariusz

• Faculty of Mechanical and Industrial Engineering, Warsaw University of Technology, ul. Narbutta 86, 02-524 Warszawa, Poland

• https://orcid.org/0000-0001-9325-8796

autor

Pałęga Michał

• Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, al. Armii Krajowej 19, 42-201 Czestochowa, Poland

• https://orcid.org/0000-0002-2779-431X

autor

Chmielewski Tomasz

• Faculty of Mechanical and Industrial Engineering, Warsaw University of Technology, ul. Narbutta 86, 02-524 Warszawa, Poland

• https://orcid.org/0000-0003-0002-8751

Bibliografia

• 1. Podulka, P., Macek, W., Szala, M., Kubit, A., Das, K.C., Królczyk, G. Evaluation of high-frequency roughness measurement errors for composite and ceramic surfaces after machining. Journal of Manufacturing Processes 2024, 121, 150–171. https://doi.org/10.1016/j.jmapro.2024.05.032.
• 2. Sawa, M., Szala, M., Jakliński, P., Pietrykowski, K. Airframe design and CFD analysis of light unmanned reconnaissance aircraft. J. Phys.: Conf. Ser. 2022, 2412, 012013. https://doi.org/10.1088/1742-6596/2412/1/012013.
• 3. Szala, M.; Walczak, M. Metallic and Ceramic Materials Integrity—Surface Engineering for Wear, Corrosion and Erosion Prevention. Materials 2024, 17, 1541. https://doi.org/10.3390/ma17071541.
• 4. Próchniak, M. The analysis of institutional environment in the area of product market competition in the new EU member states: What do the data say about the models of capitalism emerging in the CEE countries? International Journal of Management and Economics 2018, 54, 304–327. https://doi.org/10.2478/ijme-2018-0029.
• 5. Próchniak, M. An attempt to assess the quantitative impact of institutions on economic growth and economic development. International Journal of Management and Economics 2014, 38, 7–30. https://doi.org/10.2478/ijme-2014-0012.
• 6. Rydz, D. Analiza procesu walcowania blach bimetalowych z zastosowaniem rozwiązań dla ciał lepkosprężystych "Analysis of the rolling process of bimetal sheets using solutions for viscoelastic bodies", Monograph no. 152, Częstochowa University of Technology, 2009.
• 7. Skowrońska, B., Chmielewski, T., Zasada, D. Assessment of Selected Structural Properties of High-Speed Friction Welded Joints Made of Unalloyed Structural Steel. Materials 2022, 16, 93. https://doi.org/10.3390/ma16010093.
• 8. Skowrońska, B., Chmielewski, T., Kulczyk, M., Skiba, J., Przybysz, S. Microstructural Investigation of a Friction-Welded 316L Stainless Steel with Ultrafine-Grained Structure Obtained by Hydrostatic Extrusion. Materials 2021, 14, 1537. https://doi.org/10.3390/ma14061537.
• 9. Skowrońska, B., Bober, M., Kołodziejczak, P., Baranowski, M., Kozłowski, M., Chmielewski, T. Solid-state rotary friction-welded tungsten and mild steel joints. Applied Sciences 2022, 12, 9034. https://doi.org/10.3390/app12189034.
• 10. Szczucka-Lasota, B., Szymczak, T., Węgrzyn, T., Tarasiuk, W. Superalloy—steel joint in microstructural and mechanical characterisation for manufacturing rotor components. Materials 2023, 16, 2862. https://doi.org/10.3390/ma16072862.
• 11. Tomasz Węgrzyn, T.W., Szczucka-Lasota, B., Tarasiuk, W., Cybulko, P., Jurek, A., Döring, A., Kosarac, A. Mag welding of duplex steel for the construction of antenna mounts. Adv. Tech & Mat. 2022, 47, 21–25. https://doi.org/10.24867/ATM-2022-2-004.
• 12. Oniszczuk-Świercz, D., Kopytowski, A., Nowicki, R., Świercz, R. Finishing additively manufactured Ti6Al4V alloy with low-energy electrical discharges. Materials 2023, 16, 5861. https://doi.org/10.3390/ma16175861.
• 13. Jonda, E.S., Fydrych, D., Łatka, L., Myalska-Głowacka, H. The use of cluster analysis to assess the wear resistance of cermet coatings sprayed by high velocity oxy-fuel on magnesium alloy substrate. Adv. Sci. Technol. Res. J. 2024, 18, 216–227. https://doi.org/10.12913/22998624/188877.
• 14. Kumar, A., Sirohi, S., Singh, M., Fydrych, D., Pandey, C. Microstructure and mechanical properties of a dissimilar metal welded joint of Inconel 617 and P92 steel with Inconel 82 buttering layer for AUSC boiler application. International Journal of Pressure Vessels and Piping 2024, 209, 105196. https://doi.org/10.1016/j.ijpvp.2024.105196.
• 15. Lu, T.A.V. Metrikine, M.J.M.M. Steenbergen. The equivalent dynamic stiffness of a visco-elastic half-space in interaction with a periodically supported beam under a moving load. European Journal of Mechanics - A/Solids. 2020, 84, 104065.
• 16. Rakshit, A.K., Sengupta P.R. Magneto-thermo-visco-elastic waves in an initially stressed conducting layer. Sādhanā 1998, 23, 233–246.
• 17. Šulda, J., Adámek, V., Kroft R. Transient response of non-prismatic heterogeneous viscoelastic rods and identification of their material properties. European Journal of Mechanics - A/Solids 2024, 105.
• 18. Terapabkajornded, Y., Orankitjaroen, S., Licht, C. Asymptotic model of linearly visco-elastic Kelvin–Voigt type plates via Trotter theory. Advances in Difference Equations 2019.
• 19. Medina-Lombardero, S., Bain, C., Charlton, L., Pellicoro, A., Rocliffe, H., Cash, J., Reuben, R., Crichton, M.L. The biomechanics of wounds at physiologically relevant levels: Understanding skin’s stress-shielding effect for the quantitative assessment of healing. Materials Today Bio 2024, 25, 100963.
• 20. Ewoldt, R.H., Hosoi, A.E., McKinley, G.H. New measures for characterizing nonlinear viscoelasticity in large amplitude oscillatory shear, Journal of Rheology 2008, 52(6), 1427–1458.
• 21. Zhang K., Zhu M., Thomas E., Hopyan S., Sun Y. Existing and potential applications of elastography for measuring the viscoelasticity of biological tissues in vivo. Front. Physiol. Jun. 2021, 9. https://doi.org/10.3389/fphy.2021.670571.
• 22. Paul S. Biodynamic excisional skin tension lines for surgical excisions: untangling the science. Ann. R. Coll. Surg. Engl. Apr. 2018, 100(4), 330–337. https://doi.org/10.1308/rcsann.2018.0038.
• 23. Szarek A, Stradomski G, Łukomska-Szarek J, Rydz D, Wolański W, Joszko K. Wear Morphology on the Surfaces of CoCrMo Unicompartmental Knee Joint Endoprostheses as Elements of Metal–Metal Friction Nodes. Materials. 2020, 13(12), 2689. https://doi.org/10.3390/ma13122689.
• 24. Ceglie, M., Menga, N., Carbone, G. Modelling the non-steady peeling of viscoelastic tapes. International Journal of Mechanical Sciences 2024, 267.
• 25. Zhang, Z., Chen, Y., Han. K., Wei, G., Pan, Y., Sun, M. Mathematical modelling for interaction between soft ground and small curvature shield tunneling considering viscoelastic characteristics influences. Applied Mathematical Modelling 2024, 127, 607–639.
• 26. Rydz, D., Stradomski, G., Dyja, H. Influence of relative rolling reduction and thickness layers bimetallic plate at the non-uniformity of the strain after rolling process. IOP Conference Series: Materials Science and Engineering 2017, 179, 012062.
• 27. Nowacki W. Postępy w teorii sprężystości, Warszawa, PWN 1986.
• 28. Jeffreys, H. The Earth, Cambridge University Press, 1960.
• 29. Nowacki, W. Theory of asymmetrical elasticity, Warszawa, PWN/Oxford, Pergamon Press 1986.
• 30. Zhang, J, Kong, X, Cheng, L, Qi, H, Yu, M. Intelligent fault diagnosis of rolling bearings based on continuous wavelet transform-multiscale feature fusion and improved channel attention mechanism. Eksploatacja i Niezawodność – Maintenance and Reliability. 2023, 25(1), 16. https://doi.org/10.17531/ein.2023.1.16.
• 31. Szczucka-Lasota, B., Węgrzyn, T., Jurek, A. Formation of Oxides and Sulfides during the Welding Process of S700MC Steel by Using New Electrodes Wires. Materials 2024, 17, 2974. https://doi.org/10.3390/ma17122974.
• 32. Węgrzyn, T., Szczucka-Lasota, B., Szymczak, T. A micro-cooled high-strength weld for heavy transport means. TP 2024b, 19, 83–95. https://doi.org/10.20858/tp.2024.19.1.07.
• 33. Skalmierski, B., Rydz, D. Zastosowanie rozwiązań lepkosprężystych do opisania procesu walcowania blach. Seria: Metalurgia nr 39, V Międzyn. sesja naukowa: Nowe Technologie i Osiągnięcia w Metalurgii i Inżynierii Materiałowej, Częstochowa 2004.
• 34. Shew, W., Pinton, J-F. Viscoelastic effects on the dynamics of a rising bubble. Journal of Statistical Mechanics: Theory and Experiment, 1–15, January 2006.
• 35. Rydz, D., Skalmierski, B., Stefanik, A., Kawałek, A. Theoretical analysis of the process of rolling flat products with the use of visco-elastic solutions. Maszinostrojenie I Technosfera XXI Wieka, Sbornik Trudow XI Meżdinarodnoj Nauczno-Techniczeskoj Konferencji, 13–18.09.2004. Sewastopol.
• 36. Rathore, S., Kumar, A., Sirohi, S., Singh, V., Gupta, A., Fydrych, D., Pandey, C. Role of buttering layer composition on microstructural heterogeneity and mechanical properties of Alloy 617 and P92 steel dissimilar welded joints for future Indian AUSC program. Int J Adv Manuf Technol 2024, 133, 671–700. https://doi.org/10.1007/s00170-024-13747-w.
• 37. Oniszczuk-Świercz, D., Świercz, R., Kopytowski, A., Nowicki, R., Experimental investigation and optimization of rough EDM of high-thermal-conductivity tool steel with a thin-walled electrode. Materials 2022, 16, 302. https://doi.org/10.3390/ma16010302.
• 38. Węgrzyn, T., Gołombek, K., Szczucka-Lasota, B., Szymczak, T., Łazarz, B., Lukaszkowicz, K. Docol 1300M micro-jet-cooled weld in microstructural and mechanical approaches concerning applications at cyclic loading. Materials 2024a, 17, 2934. https://doi.org/10.3390/ma17122934.
• 39. Kopytowski, A., Świercz, R., Oniszczuk-Świercz, D., Zawora, J., Kuczak, J., Żrodowski, Ł. Effects of a new type of grinding wheel with multi-granular abrasive grains on surface topography properties after grinding of Inconel 625. Materials 2023, 16, 716. https://doi.org/10.3390/ma16020716.
• 40. Skowrońska, B., Chmielewski, T., Baranowski, M., Kulczyk, M., Skiba, J. Friction weldability of ultrafine-grained titanium grade 2. Journal of Advanced Joining Processes 2024a, 10, 100246. https://doi.org/10.1016/j.jajp.2024.100246.
• 41. Skowrońska, B., Szulc, B., Morek, R., Baranowski, M., Chmielewski, T.M. Selected properties of X120Mn12 steel welded joints by means of the plasma-MAG hybrid method. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 2024b, 14644207241256113. https://doi.org/10.1177/14644207241256113.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr POPUL/SP/0154/2024/02 w ramach programu "Społeczna odpowiedzialność nauki II" - moduł: Popularyzacja nauki (2025).