Measurement of straightness and verticality of sheet piling

• Autorzy: Kokoszka Wanda , Ochab Piotr , Gardzińska Anna

Identyfikatory

DOI

10.2478/ceer-2020-0045

• Języki publikacji: EN

Abstrakty

EN

Sheet piling is commonly used in various areas of special construction. Embedded in the ground before carrying out excavation works, sheet piling constitutes an enclosure and protection for the designed excavation. It is a temporary enclosure and protection for excavations made for communication structures, launch shafts built for microtunnel construction, etc. In order to assess the quality of the engineering works related to the construction of sheet piling, measurements were made of straightness and verticality of the sheet piling used for the technological chambers. The measurements concerned two technological chambers of 7.2 and 6.4 m height. Inventory measurements were made using a total station of 1” accuracy and a leveling staff with the appliance of the socalled projection method. The two technological chambers were built in the investment area called “Infrastructure construction for rainwater drainage, water supply and sanitary sewage collection from the John Paul II International Airport Kraków-Balice.”

Słowa kluczowe

EN

special construction; technological chamber; sheet piling; measurement of straightness; verticality measurement; accuracy analysis

PL

konstrukcja specjalna; komora technologiczna; ścianki szczelne; pomiar prostoliniowości; pomiar pionowości; analiza dokładności

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: Civil and Environmental Engineering Reports
• Rocznik: 2020
• Tom: Vol. 30, no. 3
• Strony: 281--294
• Opis fizyczny: Bibliogr. 17 poz., fot., rys., tab., wykr.

Twórcy

autor

Kokoszka Wanda

• Rzeszow University of Technology, Rzeszów, Poland

autor

Ochab Piotr

• Rzeszow University of Technology, Rzeszów, Poland

autor

Gardzińska Anna

• Rzeszow University of Technology, Rzeszów, Poland

Bibliografia

• 1. Rychlewski, R. 2012. Sheet pile walls (Ścianki szczelne). Inżynier budownictwa, 5, 76-80.
• 2. http://www.grainbud.pl/
• 3. http://www.pietrucha.pl/pl/oferta/inzyniera-ladowa-i-wodna/grodzicewinylowe/zastosowanie.
• 4. Sahajada, K. and Sobala, D. 2006. The method of static pressing of steel sheet piles (Metoda statycznego wciskania grodzic stalowych). Geoinżynieria drogi mosty tunele, 01/2006 (08), 26-29.
• 5. Piling handbook 2008. ArcelorMittal, 8-th edition.
• 6. Tan, Y. and Lu, Y. 2009. Parametric Studies of DDC induced Deflections of Ssheet pile walls. Computers and Geotechnics, 36(5), 902-910.
• 7. Eskandari, L. and Kalantari, B. 2011. Basic Types of Sheet Pile Walls and Their Application in the Construction Industry - a Review. EJGE, 16, 1533-1541.
• 8. Skrabl, S. 2006. Interactional Approach of Cantilever Pile Walls Analysis. ACTA Geotechnica Slovenica, 1/2006, 47-59.
• 9. https://geotechnicaldesign.info/en12063-1999/g8-6.html
• 10. Skrzypczak, I., Kokoszka, W., Buda-Ożóg, L., Kogut, J. and Słowik, M. 2017. Environmental aspects and renewable energy sources in the production of construction aggregate. ASEE17, E3S Web of Conferences 22, 00160, 1-8.
• 11. Skrzypczak, I., Buda-Ożóg, L. and Pytlowany, T. 2016. Fuzzy method of conformity control for compressive strength of concrete on the basis of computational numerical analysis. Meccanica, 51(2), 383-389.
• 12. Skrzypczak, I. and Oleniacz, G. 2017. Serviceability Limit Verification for Structural Elements of Steel Hall. 10th International Conference on Environmental Engineering (10thICEE), Book Series: Environmental Engineering-Vilnius Spausdinta, UNSP enviro.2017.243.
• 13. Skrzypczak, I., Oleniacz, G., Leń, P. and Mika, M. 2017. Measurements of Displacements and Deformations and Reliability Analysis of Base Transceiver Station (BTS) Made of Steel. 10th International Conference on Environmental Engineering (10thICEE), Book Series: Environmental Engineering-Vilnius Spausdinta, UNSP enviro.2017.242
• 14. Oleniacz, G., Skrzypczak, I., Ślęczka, L., Świętoń, T. and Rymar, M. 2017. Survey of the Urban Bell in the Belfry of St. Trinity Church in Krosno. Reports on Geodesy and Geoinformatics, 103, 1, 38-45.
• 15. Mrówczynska, M., Sztubecki, J. and Greinert, A. 2020. Compression of results of geodetic displacement measurements using the PCA method and neural networks. Measurement, 158, 107693.
• 16. Mrówczynska, M. and Sztubecki, J. 2019. Group Method of Data Handling as a Tool to Determine Vertical Displacements. IOP Conference Series-Materials Science and Engineering, 471, 052-077.
• 17. Mrówczynska, M. and Sztubecki, J. 2019. The use of evolutionary algorithms for designing an optimum structure of a geodesic measurement and control network. MATEC Web of Conferences. 262, UNSP 07008.

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020)