PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2018 | Vol. 63, iss. 2 | 987--992
Tytuł artykułu

Physical Modelling of Degassing Process by Blowing of Inert Gas

Treść / Zawartość
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This paper deals with the possibilities of using physical modelling to study the degassing of metal melt during its treatment in the refining ladle. The method of inert gas blowing, so-called refining gas, presents the most common operational technology for the elimination of impurities from molten metal, e.g. for decreasing or removing the hydrogen content from liquid aluminium. This refining process presents the system of gas-liquid and its efficiency depends on the creation of fine bubbles with a high interphase surface, uniform distribution, long period of its effect in the melt, and mostly on the uniform arrangement of bubbles into the whole volume of the refining ladle. Physical modelling represents the basic method of modelling and it makes it possible to obtain information about the course of refining processes. On the basis of obtained results, it is possible to predict the behaviour of the real system during different changes in the process. The experimental part focuses on the evaluation of methodical laboratory experiments aimed at the proposal and testing of the developed methods of degassing during physical modelling. The results obtained on the basis of laboratory experiments realized on the specific physical model were discussed.
Wydawca

Rocznik
Strony
987--992
Opis fizyczny
Bibliogr. 25 poz., fot., rys., tab., wykr.
Twórcy
autor
  • VŠB-Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Department of Metallurgy and Foundry and Regional Materials Science and Technology Centre, 17. Listopadu 15/2172, Ostrava-Poruba, Czech Republic, karel.michalek@vsb.cz
  • VŠB-Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Department of Metallurgy and Foundry and Regional Materials Science and Technology Centre, 17. Listopadu 15/2172, Ostrava-Poruba, Czech Republic
autor
  • VŠB-Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Department of Metallurgy and Foundry and Regional Materials Science and Technology Centre, 17. Listopadu 15/2172, Ostrava-Poruba, Czech Republic
autor
  • VŠB-Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Department of Metallurgy and Foundry and Regional Materials Science and Technology Centre, 17. Listopadu 15/2172, Ostrava-Poruba, Czech Republic
autor
  • Silesian University Of Technology, Faculty of Materials Engineering and Metallurgy, ul. Krasińskiego 8, Katowice, Poland, mariola.saternus@polsl.pl
  • Silesian University Of Technology, Faculty of Materials Engineering and Metallurgy, ul. Krasińskiego 8, Katowice, Poland
autor
  • Silesian University Of Technology, Faculty of Materials Engineering and Metallurgy, ul. Krasińskiego 8, Katowice, Poland
Bibliografia
  • [1] S. Kato, Sumitomo Light Metal Technical Report 34, 59-77 (1993).
  • [2] P. N. Anyalebechi, Light Metals Conference, TMS,857-872 (2003).
  • [3] M. Saternus, J. Botor, Metalurgija 48, 175-179 (2009).
  • [4] L. Zhang, X. Lv, A. Tryg Torgerson, M. Long, Mineral processing&Extractive Metall. Rev. 32, 150-228 (2011).
  • [5] C. J. Simensen, G. Berg, ALUMINIUM 56, 335-340 (1980).
  • [6] M. Hernández-Hernández, J. L. Camacho-Martinéz, C. Gonzáles-Rivera, M. A. Ramiréz-Argáez. Journal of Materials Processing Technology 236, 1-8 (2016).
  • [7] M. B. Taylor, M. C. G. Belanger, E. D. Adams, Light Metals, TMS 779-784 (2000).
  • [8] G. Mealand, E. Myrbostad, K. Vegas, Light Metals, TMS 855-859 (2002).
  • [9] J. M. Chateau, Aluminium Times 04/05, 34-35 (2003).
  • [10] P. Le Brun, Light Metals, TMS 869-875, (2002).
  • [11] K. A. Carpenter, M. J. Hanagan, Light Metals, TMS 1017-1020 (2001).
  • [12] Y. Liu, T. Zhang, M. Sano, Q. Wang, X. Ren, J. He,Trans. Of Nonferrous Metals Society of China 21, 1896-1904, (2011).
  • [13] J. W. Evans, A. Field, N. Mittal, Light Metals, TMS 909-913, (2003).
  • [14] E. Waz, J. Carre, P. Le Brun, A. Jardy, C. Xuereb, D. Ablitzer, Light Metals, TMS 901-907 (2003).
  • [15] J. L. Song, F. Chiti, W. Bujalski, A. W. Nienow, M. R. Jolly, Light Metals, TMS 743-748 (2004).
  • [16] E. R. Gomez, R. Zenit, C. G. Rivera, G. Trapaga, A. Ramirez-Argaez, Metallurgical and Materials Transaction B 44B, 974-983 (2013).
  • [17] J. L. Camacho-Martinez, M. A. Ramizrez-Argaez, A. Juarez-Hernandez, C. Gonzalez-Rivera, G. Trapaga-Martinez, Materials and Manufacturing Proces 27, 556-560 (2012).
  • [18] F. Kerdouss, P. Proulx, J. F. Bilodeau, S. Vaudreuil, Light Metals, TMS 793-795 (2004).
  • [19] A. Fjeld, S. Edussuriya, J. W. Evans, A. Mukhopadhyay, Light Metals, TMS 963-968 (2005).
  • [20] B. Panic, J. Janiszewski, Metalurgija, 53, 331-334 (2014).
  • [21] M. Warzecha, Metalurgija 50, 147-150 (2011).
  • [22] T. Merder, J. Pieprzyca, M. Saternus, Metalurgija 53, 155-158 (2014).
  • [23] K. Michalek, Využití fyzikálního a numerického modelování pro optimalizaci metalurgických procesů, VŠB Ostrava, 2001, ISBN 80-7078-861-5 (in Czech).
  • [24] M. Saternus, J. Botor, Archives of Metallurgy and Materials 55, 463-475 (2010).
  • [25] M. Saternus, Metalurgija 50, 257-260 (2011).
Uwagi
EN
1. The work was created under the support of the Czech Ministry of Industry and Trade within the frame of the programme TRIO in the solution of the projects reg. No. FV10080 “Research and Development of Advanced Refining Technologies of Aluminium Melts for Increase in Product Quality” and project No. LO1203 “Regional Materials Science and Technology Centre - Feasibility Program” funded by the Ministry of Education, Youth and Sports of the Czech Republic and from the support of “Student Grant
Competition” projects, No. SP2018/77 and SP2018/60.
This paper was created with the financial support of Polish Ministry for Science and Higher Education under internal grant BK-221/RM0/2018 for Faculty of Materials Engineering and Metallurgy, Silesian University of Technology, Poland.
PL
2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.baztech-33b4b378-8343-49a9-8044-912e09eafa8e
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.