PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2006 | Special Issue S2 |
Tytuł artykułu

Influence of ship motion on waterway. Backward current velocity

Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In this work was presented an influence of bow form of inland waterways ship and waterway limitations on values of backward current velocity. The analysis was performed on the basis of results of calculations with the use of numerical modeling the flow around ship hull. The applied HPSDK computation system (a computer software developed by these authors) is based on using surface distribution of vorticity to analyze the velocity field and pressure distribution around ship hull. It was proved that the generated backward current velocity exceeded its permissible non-scouring values
Słowa kluczowe
Wydawca
-
Rocznik
Opis fizyczny
p.23-28,fig.,ref.
Twórcy
autor
  • Wroclaw University of Technology, Lukasiewicza 7/9, 50-371 Wroclaw, Poland
autor
  • Wroclaw University of Technology, Lukasiewicza 7/9, 50-371 Wroclaw, Poland
Bibliografia
  • 1. Arkuszewski A., Przyłęcki W., Symonowicz A., Żylicz A.: Use of waterways (in Polish). Arkady. Warszawa, 1971
  • 2. Górski W.; Kulczyk J.; Tabaczek T.: The effect of limited depth and with of waterway on performance of ducted propellers, Polish Maritime Research, No 4(46), vol.12, 2005.
  • 3. INBAT Working Documentation (in Polish), Wrocław University of Technology. Wrocław, 2004
  • 4. ITTC : Proceedings of the 23rd International Towing Tank Conference, Vol. I, 2002.
  • 5. Kulczyk J.: Numerical modeling the hydrodynamic interactions within propulsion system of inland navigation ship (in Polish). Research reports of the Institute of Construction and Operation of Machines, Wrocław University of Technology, No. 66, Series : Monographs No.17. Publishing House of Wrocław University of Technology (Wydawnictwo Politechniki Wrocławskiej). Wrocław, 1992
  • 6. Kulczyk J.: The influence of going ship on waterway bottom, 6-th Conference on Problems of Hydro-engineering, Institute of Geotechnics and Hydrotechnics, Wrocław University of Technology, Series : Conferences No. 38. Wrocław, 1996
  • 7. Kulczyk J., Tabaczek T.: Energy-saving devices in ship building and operating. Nozzles and half- nozzles for equalizing the velocity field. Principles of choice (in Polish). Institute of Construction and Operation of Machines, Wrocław University of Technology,Report No. S-026/93, Series : Reports. Wrocław, 1993
  • 8. Kulczyk J.; Popczyk Z.; Tabaczek T.; Zając P.: Numerical modeling the hydrodynamic interactions within steering gear of inland navigation ship (in Polish). Institute of Construction and Operation of Machines, Wrocław University of Technology, Report No. S-020/97, Series : Reports. Wrocław, 1997
  • 9. Kulczyk J.; Prokopowicz J.; Tabaczek T.; Werszko R.; Zawiślak M.; Zieliński A.: Numerical modeling the viscous flow around hull of inland navigation ship on limited waterway (in Polish). Institute of Construction and Operation of Machines, Wrocław University of Technology, Report No. S-043/03, Series : Preprints. Wrocław, 2003
  • 10. Kulczyk J.; Tabaczek T.; Werszko R.: Method of Describing Hull Shape of Generating Gird of HPSDK Software, 14th International Conference on Hydrodynamics in Ship Design, Szczecin, September 2001.
  • 11. Kulczyk J.; Winter J.: Inland waterways transport (in Polish). Publishing House of Wrocław University of Technology (Oficyna Wydawnicza Politechniki Wrocławskiej). Wrocław, 2003
  • 12. Skatula L.: Building-over rivers and mountain streams (in Polish). PWRL. Warszawa, 1964
  • 13. Zając P.: A method for determining values of sag and trim of inland navigation ship (in Polish). Doctoral thesis, Institute of Construction and Operation of Machines, Wrocław University of Technology, Report No.11/99, Series : Preprints. Wrocław, 1999
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.agro-b035297b-1bd9-4302-997a-a35efbbaa573
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.