Liquid-solid interaction during formation of nanocomposite systems

• Autorzy: Ihor Shtablavyi , Stepan Mudry , Paweł Kajak
• Języki publikacji: EN

Abstrakty

EN

Structural changes in mixtures of liquid Bi with small Cu and Ni particles were studied at temperatures of 615 and 1145K. Microstructures of the composites were observed (SEM) and analyzed after treatment at different temperatures and various durations of stirring. The structure of the mixtures of Bi with Cu(Ni) particles was investigated by means of X-ray diffraction, both in the solid and liquid state.

Słowa kluczowe

EN

composite materials; liquid metals and alloys; metallic powders; microstructure; short-range order.

• Czasopismo: Polish Journal of Chemical Technology
• Rocznik: 2012
• Tom: 14
• Numer: 4
• Strony: 42-45

Daty

wydano

2012-12-01

online

2013-01-12

Twórcy

autor

Ihor Shtablavyi

• Ivan Franko National University of Lviv, Department for Metal Physics, Kyrylo and Mephodii 8, Ua-79005 Lviv, Ukraine,

autor

Stepan Mudry

• Ivan Franko National University of Lviv, Department for Metal Physics, Kyrylo and Mephodii 8, Ua-79005 Lviv, Ukraine

autor

Paweł Kajak

• Gdansk University of Technology, Department of Solid State Physics, Faculty of Applied Physics and Mathematics, ul. Narutowicza 11/12, 80-233 Gdańsk, Poland

Bibliografia

• 1. Kainer, U. (2006). Metal Matrix Composites. Wiley.
• 2. Krishan, K. Chawla. (1998). Composite Materials Science andEngineering. (2nd ed.). Springer Science + Business Media Inc.
• 3. Clyne, T.W. & Withers, P.J. (1993). An Introduction to MetalMatrix Composites. Cambridge: Cambridge University Press.
• 4. Rohatgi, P.K., Asthana, R. & Das, S. (1986) Solidification, structures, and properties of cast metal-ceramic particle composites. International Metals Reviews. 31, 115-139.
• 5. Prasad, S.V. & Asthana, R.(2004). Aluminum Metal Matrix Composites for. Automotive Applications: Tribological Considerations. Tribol. Lett. 17(3), 445-453.[Crossref]
• 6. Srivatsan, T.S., Sudarshan, T.S. & Lavernia, E.J. (1995). Processing of discontinuously-reinforced metal matrix composites by rapid solidification. Prog. Mater. Sci. 39 (4-5), 317-409. DOI: 10.1016/0079-6425(95)00003-8.[Crossref]
• 7. Lavernia, E.J. & Wu, Y. (1996). Spray atomization anddeposition. Chichester: John Wiley Publishing Ltd.
• 8. Mei, Q.S. & Lu, K. (2007) Melting and superheating of crystalline solids: From bulk to nanocrystals. Prog. Mater. Sci. 52(8), 1175-1262. DOI: 10.1016/j.pmatsci.2007.01.001.[Crossref][WoS]
• 9. Rinaldi, C., Chaves, A., Elborai, S., He, Xiaowei (Tony) & Zahn, M. (2005) Magnetic fluid rheology and flows. CurrentOpinion in Colloid & Interface Science 10(3-4), 141-157. DOI: 10.1016/j.cocis.2005.07.004.[Crossref]
• 10. Massalsky, T. (1998). Binary alloy phase diagrams. Ohio: American Society for Metals: Metalls Park.
• 11. Kaban, I. & Hoyer, W. (2002). Interplay between atomic and electronic structure inliquid noble-polyvalent metal systems. Journal of Non-Crystalline Solids. 312-314, 41-46. DOI: 10.1016/S0022-3093(02)01647-2.[Crossref]
• 12. Okajima, K. & Sakao, H.(1983). Densities of Liquid Bismuth-Silver and Bismuth-Cadmium Alloys. Mater. Trans. JIM 24, 216-222.

Identyfikatory

DOI

10.2478/v10026-012-0100-7