PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2010 | 12 | 3 | 10-14
Tytuł artykułu

Polyurethanes used in the endoprosthesis of joints

Treść / Zawartość
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The aim of the studies presented in this paper was the selection of the polyurethanes synthesized from different substrates in order to obtain i) ceramic - biodegradable polymer composite and ii) polyurethane resistant to abrasive wear. The polyurethanes were obtained from the crystalline prepolymers extended by water, because it may have a beneficial effect on the toxicity of the material. The properties of PUs were investigated using infrared spectroscopy, thermogravimetry, differential scanning calorimetry and scanning electron microscopy. In all the tested polyurethanes the peak from the reactive -NCO groups was not observed, which indicates that all the substrates are fully reacted. Such polyurethanes are characterized by interesting properties with the perspective use as components of ceramic-polymer joints endoprosthesis. The designed endoprosthesis should fulfill at least three functions: load bearing function (ceramic core), fastening and stabilizing endoprosthesis to the bone (composite ceramics - biodegradable polymer) and tribologic function allowing mating with parts of the prosthesis (polyurethane layer resistant to abrasive wear).
Wydawca

Rocznik
Tom
12
Numer
3
Strony
10-14
Opis fizyczny
Daty
wydano
2010-01-01
online
2010-09-27
Twórcy
  • Faculty of Materials Science and Engineering, Warsaw University of Technology, ul. Wołoska 141, 02-507 Warszawa, Poland
  • Faculty of Materials Science and Engineering, Warsaw University of Technology, ul. Wołoska 141, 02-507 Warszawa, Poland
  • Faculty of Materials Science and Engineering, Warsaw University of Technology, ul. Wołoska 141, 02-507 Warszawa, Poland
  • The Institute Ceramics and Building Materials, ul. Postępu 9, 02-676 Warszawa, Poland
  • Faculty of Materials Science and Engineering, Warsaw University of Technology, ul. Wołoska 141, 02-507 Warszawa, Poland
Bibliografia
  • Marciniak, J. (2002) Biomaterials. Gliwice, Poland: Wydawnictwo Politechniki Śląskiej, in Polish.
  • Łaskawiec, J. & Michalik, R. (2002) Theoretical and application in implants. Gliwice, Poland: Wydawnictwo Politechniki Śląskiej, in Polish.
  • Balcerowiak, W., Otfinowski, J. & Pawelec, A. (2000). Analysis of the causes of premature wear of polyethylene acetabulum hip-joint. Inżynieria Biomateriałów 8, 14-17, in Polish.
  • Schwart, Ch.J. & Bahadur, S. (2006). Development and testing of a novel joint wear Simulator and investigation of the viability of an elastomeric polyurethane for total-joint arthroplasty devices. Wear 262, 332-339. DOI: 10.1016/j.wear.2006.05.018.[Crossref][WoS]
  • Błażewicz, S. & Stoch, L. (2003). Biomaterials. Warszawa, Poland: Akademicka Oficyna Wydawnicza EXIT, in Polish.
  • Oledzka, E., Sobczak, M. & Kołodziej, W. L. (2007). Polymers in medicine-review of past achievements. Polimery 11-12, 793, in Polish.
  • Wirpsza, Z. (1991) Polyurethanes. Chemistry, technology, applications. Warszawa, Poland: WNT, in Polish.
  • Nair, L. S. & Laurencic, C. T. (2007). Biodegradable polymers as biomaterials. Prog. Polym. Sci. 32, 762-798. DOI:10.1016/j.progpolymsci.2007.05.017.[Crossref][WoS]
  • Elzein, T., Nasser-Eddine, M., Delaite, C., Bistac, S. & Dumas, P. (2004). Ftir study of polycaprolactone chain organization at interfaces. Journal of Colloid and Interface Science 273, 381-387. DOI:10.1016/j.jcis.2004.02.001.[Crossref]
  • Lee, K.-S., Kim, D. S. & Kim, B. S. (2007). Biodegradable Molecularly Imprinted Polymers Based on Poly(ε-caprolactone). Biotechnology and Bioprocess Engineering 12, 152-156.[WoS][Crossref]
  • PL Patent Application No. P-384883.
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.-psjd-doi-10_2478_v10026-010-0025-y
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.