PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2010 | 12 | 2 | 46-51
Tytuł artykułu

Synthesis of inorganic oxide composites with the use of postgalvanic waste solutions of copper(II) sulfate

Treść / Zawartość
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The study was undertaken to obtain an oxide composite (inorganic colourful pigment) in the method based on the use of postgalvanic waste solution of copper(II) sulfate. The conditions of the process of precipitation of synthetic CuOSiO2 were optimised by checking the effect of the concentration and the volume ratio of the reagents and the temperature on the physico-chemical parameters of the final product. The oxide composite obtained in the optimum conditions was characterised by high refinement of particles and large specific surface area BET of 326 m2/g.
Wydawca

Rocznik
Tom
12
Numer
2
Strony
46-51
Opis fizyczny
Daty
wydano
2010-01-01
online
2010-07-09
Twórcy
  • Institute of Chemical Technology and Engineering, Poznan University of Technology, M. Sklodowskiej-Curie 2 Sq., 60-965 Poznan, Poland
  • Institute of Chemical Technology and Engineering, Poznan University of Technology, M. Sklodowskiej-Curie 2 Sq., 60-965 Poznan, Poland
  • Institute of Chemical Technology and Engineering, Poznan University of Technology, M. Sklodowskiej-Curie 2 Sq., 60-965 Poznan, Poland
Bibliografia
  • Shu, C., Mingxia, X., Cailou, Z. & Jiaqi, T. (2002). Fabrication of cordierite powder for magnesium-aluminum hydroxide and sodium silicate: Its characteristic and sintering, Mater. Res. Bull. 37, 1333-1340. DOI:10.1016/S0025-5408(02)00759-6.[Crossref]
  • Varghese, S. & Karger-Kocsis, J. (2003). Natural rubber-based nanocomposites by latex compounding with layered silicates, Polymer 44, 4921-4927. DOI:10.1016/S0032-3861(03)00480-4.[Crossref]
  • Arroyo, M., López-Manchado, M. A. & Herrero, B. (2003). Organo-montmorillonite as substitute of carbon black in natural rubber compounds, Polymer 44, 2447-2453. DOI:10.1016/S0032-3861(03)00090-9.[Crossref]
  • Hedicke-Höchstötter, K., Lim, G. T., Altstädt, V. (2009). Novel polyamide nanocomposites based on silicate nanotubes of the mineral halloysite, Compos. Sci. Technol. 69, 330-334. DOI:10.1016/j.compscitech.2008.10.011.[WoS][Crossref]
  • Jo, B., Park, S. & Kim, D. (2008). Mechanical properties of nano-MMT reinforced polymer composite and polymer concrete, Constr. Build. Mater. 22, 14-20. DOI:10.1016/j.conbuildmat.2007.02.009.[Crossref]
  • Wieczorek, M., Krysztafkiewicz, A. & Jesionowski, T. (2004). Influence of modification by N-2-(aminoethyl)-3-aminopropyltrimethoxysilane on physicochemical properties of bentonite, J. Phys. Chem. Solids 65, 447-452. DOI:10.1016/j.jpcs.2003.09.016.[Crossref]
  • Krysztafkiewicz, A., Michalska, I. & Jesionowski, T. (2001). Zinc, chromium and iron silicates as fillers and inorganic colour pigments, Compos. Interfaces 8, 257-262. DOI: 10.1163/15685540152594730.[Crossref]
  • Zanetti, M. & Costa, L. (2004). Preparation and combustion behaviour of polymer/layered silicate nanocomposites based upon PE and EVA, Polymer 45, 4367-4373. DOI:10.1016/j.polymer.2004.04.043.[Crossref]
  • Upadhyay, R. D. & Kale, D. D. (2001). Properties of polypropylene filled with synthetic sodium aluminum silicate, J. Appl. Polym. Sci. 81, 2297-2303. DOI: 10.1002/ app.1670.[Crossref]
  • Ozyilmaz, G., Tukel, S. S. & Alptekin, O. (2005). Activity and storage stability of immobilized glucose oxidase onto magnesium silicate, J. Mol. Cat. B 35, 154-160. DOI:10.1016/ j.molcatb.2005.07.001.[Crossref]
  • Buczydło, E. (1972). Pickling and galvanizing plants waste utilization (in Polish), Wydanie 1, Wydawnictwo Śląsk, Katowice.
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.-psjd-doi-10_2478_v10026-010-0017-y
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.