PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Czasopismo
2012 | 10 | 2 | 447-453
Tytuł artykułu

Study of the thermal stability of Zerodur glass ceramics suitable for a scanning probe microscope frame

Treść / Zawartość
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The work presents measurements of the length stability of Zerodur glass ceramic with temperature change. Measurement of this thermal characteristic is necessary for determination of the optimal temperature at which the Zerodur glass ceramic has a coefficient of thermal expansion close to zero. The principle of the measurement is to monitor the length changes using an optical resonator with a cavity mirror spacer made from the Zerodur material to be studied. The resonator is placed inside a vacuum chamber with a temperature control. A tunable laser diode is locked to a certain optical mode of the resonator to monitor the optical frequency of this mode. A beat-note signal from optical mixing between the laser and a stabilized femtosecond frequency comb is detected and processed. The temperature dependence of the glass ceramics was determined and analyzed. The resolution of the length measurement of the experimental set-up is on the order of 0.1 nm.
Wydawca

Czasopismo
Rocznik
Tom
10
Numer
2
Strony
447-453
Opis fizyczny
Daty
wydano
2012-04-01
online
2012-03-31
Twórcy
  • Institute of Scientific Instruments of the ASCR, v.v.i. Academy of Sciences of the Czech Republic, Královopolská 147, 612 64, Brno, Czech Republic, ocip@isibrno.cz
autor
  • Institute of Scientific Instruments of the ASCR, v.v.i. Academy of Sciences of the Czech Republic, Královopolská 147, 612 64, Brno, Czech Republic
  • Institute of Scientific Instruments of the ASCR, v.v.i. Academy of Sciences of the Czech Republic, Královopolská 147, 612 64, Brno, Czech Republic
  • Institute of Scientific Instruments of the ASCR, v.v.i. Academy of Sciences of the Czech Republic, Královopolská 147, 612 64, Brno, Czech Republic
autor
  • Institute of Scientific Instruments of the ASCR, v.v.i. Academy of Sciences of the Czech Republic, Královopolská 147, 612 64, Brno, Czech Republic
Bibliografia
  • [1] H. Bach and D. Krause (Ed.), Low thermal expansion glass ceramics, 2nd edition (Springer-Verlag, Berlin Heidelberg, 2005)
  • [2] O. Lindig, W. Pannhorst, Appl. Optics 24, 3330 (1985) http://dx.doi.org/10.1364/AO.24.003330[Crossref]
  • [3] J. H. Burge, T. Peper, S. F. Jacobs, Appl. Optics 38, 7161 (1999)
  • [4] S. T. Cundiff, J. Ye, Rev. Mod. Phys. 75, 325 (2003) http://dx.doi.org/10.1103/RevModPhys.75.325[Crossref]
  • [5] R. ŠmÍd et al., 17th Slovak-Czech-Polish Optical Conference on Wave and Quantum Aspects of Contemporary Optics, Sep. 6–10, 2010, Janska Dolina, Slovakia (SPIE, 2010) 77460I
  • [6] J. Oulehla et al., Optical Measurement Systems for Industrial Inspection VII, May. 22–26, 2011, Munich, Germany (SPIE, 2011) 80823Q
  • [7] H. R. Telle et al., Appl. Phys. B 69, 327 (1999) http://dx.doi.org/10.1007/s003400050813[Crossref]
  • [8] M. Bellini, T. W. Haensch, Opt. Lett. 25, 1049 (2000) http://dx.doi.org/10.1364/OL.25.001049[Crossref]
  • [9] J. K. Ranka, R. S. Windeler, A. J. Stentz, Opt. Lett. 25, 25 (2000) http://dx.doi.org/10.1364/OL.25.000025[Crossref]
  • [10] R. Šmíd, O. Číp, J. Lazar, Meas. Sci. Rev. 8, 114 (2008) http://dx.doi.org/10.2478/v10048-008-0027-6[Crossref]
  • [11] R. Šmíd, O. Číp, M. Čížek, B. Mikel, J. Lazar, IEEE T. Ultrason. Ferr. 57, 636 (2010) http://dx.doi.org/10.1109/TUFFC.2010.1459[Crossref]
  • [12] K. Nakagawa, M. de Labachelerie, Y. Awaji, M. Kourogi, J. Opt. Soc. Am. B 13, 2708 (1996) http://dx.doi.org/10.1364/JOSAB.13.002708[Crossref]
  • [13] I. Mitra et al., Emerging Lithographic Technologies VIII, Feb. 24–26, 2004, Santa Clara, California, USA (SPIE, Bellingham, USA, 2004) 96
  • [14] J. Ye, J. L. Hall, S. A. Diddams, Opt. Lett. 25, 1675 (2000) http://dx.doi.org/10.1364/OL.25.001675[Crossref]
  • [15] W. Liu, J. J. Talghader, Appl. Optics 41, 3285 (2002) http://dx.doi.org/10.1364/AO.41.003285[Crossref]
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.-psjd-doi-10_2478_s11534-011-0112-6
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.