PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Czasopismo
2011 | 9 | 5 | 1294-1300
Tytuł artykułu

Diffractometric examination of the structure of heat-resisting steel-based coatings in different measurement geometries

Treść / Zawartość
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Coatings of the composition of 310S heat-resisting steel dopped Al and Ir additions, deposited on a substrate of the same steel by the magnetron sputtering method, were examined. The measurements were made in the classical Bragg-Brentano geometry and by the GXRD method. With the fixed and different position of the coated sample by rotating the sample by angles ψ. The coating as deposited and after being soaked at 400°C for 15 minutes was subjected to examinations. The examination carried out have shown that coatings may have a unique, subtle structure which is metastable and undergoes irreversible changes in the temperatures up to 400°C. It has been found that in the outermost coating zones and zones closer to the substrate, areas occur in the coating structure, which have the different lattice parameter compared to the basic phase. Additionaly, the local period of the structure equal 5.9 nm was found.
Wydawca

Czasopismo
Rocznik
Tom
9
Numer
5
Strony
1294-1300
Opis fizyczny
Daty
wydano
2011-10-01
online
2011-09-15
Twórcy
  • Institute of Materials Engineering, Czestochowa University of Technology, 42-200, Czestochowa, Armii Krajowej 19, Poland, bratek@wip.pcz.pl
Bibliografia
  • [1] B.D. Cullity, Elements of X-ray diffractions (Addison-Wesley, Massachusetts, 1978)
  • [2] K.N. Stoev, K. Sakurai, Spectrochim. Acta B 54, 41 (1999) http://dx.doi.org/10.1016/S0584-8547(98)00160-8[Crossref]
  • [3] T.C. Huang, Adv. X-ray Anal. 33, 91 (1990)
  • [4] T. Noma, K. Takada, A. Iida, Adv. X-ray Anal. 42, 578 (2000)
  • [5] H. Wu, B. Li, W. Miao, X. Liu, K. Tao, Surf. Coat. Tech. 149, 198 (2002) http://dx.doi.org/10.1016/S0257-8972(01)01442-6[Crossref]
  • [6] T.C. Huang, P.K. Predecki, Adv. X-ray Anal. 40, 727 (1996)
  • [7] L Lhotka, R. Kužel, G. Cappuccino, V. Valvoda, Surf. Coat. Tech. 148, 96 (2001) http://dx.doi.org/10.1016/S0257-8972(01)01327-5[Crossref]
  • [8] B. Kucharska, E. Kulej, Arch. Metall. Mater. 55, 45 (2010)
  • [9] K. Tanner, T.P.A. Hase, T.A. Lafforf, M.S. Goorsky, Adv. X-ray Anal. 47, 309 (2004)
  • [10] K. Omote, J. Harada, Adv. X-ray Anal. 43, 192 (2000)
  • [11] Committe on Beam Technologies: Opportunities in Attanding Fully-Integrated Processing Systems, Commission on Engineering and Technical Systems, National Research Council, National Academies Press, Washington, D.C. 1992
  • [12] H. Geng, Semiconductor Manufacturing Handbook (McGraw-Hill Prof. Publ., Blacklick, OH, USA, 2005)
  • [13] A. Anders, Thin Solid Films 518, 4087 (2010) http://dx.doi.org/10.1016/j.tsf.2009.10.145[Crossref]
  • [14] J.A. Thornton, Thin Solid Films 107, 3 (1983) http://dx.doi.org/10.1016/0040-6090(83)90003-2[Crossref]
  • [15] R. Messier, A.P. Giri, R.A. Roy, J. Vac. Sci. Technol. A 2, 500 (1984) http://dx.doi.org/10.1116/1.572604[Crossref]
  • [16] A.D. Pogrebnjak, A.P. Shpak, N.A. Azarenkov, V.M. Beresnev, Phys.-Usp. 52, 29 (2009) http://dx.doi.org/10.3367/UFNe.0179.200901b.0035[Crossref]
  • [17] J. Musil, Surf. Coat. Tech. 100–101, 280 (1998) http://dx.doi.org/10.1016/S0257-8972(97)00633-6[Crossref]
  • [18] A.D. Pogrebnjak, A.P. Shpak, N.A. Azarenkov, V.M. Beresnev, Phys.-Usp. 175, 35 (2009)
  • [19] B. Window, N. Savvides, J. Vac. Sci. Technol. A 4, 504 (1986) http://dx.doi.org/10.1116/1.573869[Crossref]
  • [20] R. Messier, J. Vac. Sci. Technol. A 18, 1538 (2000) http://dx.doi.org/10.1116/1.582381[Crossref]
  • [21] M.J. Godbole, A.J. Pedraza, L.F. Allard, G. Geesey, J. Mater. Sci. 27, 5585 (1992) http://dx.doi.org/10.1007/BF00541627[Crossref]
  • [22] P.J. Grundy, J.M. Marsh, J. Mater. Sci. Lett. 13, 677 (1978)
  • [23] R.I. Bates, R.D. Arnell, Surf. Coat. Tech. 89, 204 (1997) http://dx.doi.org/10.1016/S0257-8972(96)02890-3[Crossref]
  • [24] S. Cusenza, C. Borchers, E. Carpene, P. Schaaf, J. Phys.-Condens. Mat. 19, 106211 (2007) http://dx.doi.org/10.1088/0953-8984/19/10/106211[Crossref]
  • [25] K.L Dahm, P.A. Dearnley, Surf. Eng. 12, 61 (1996)
  • [26] S. Inoue, T. Saeki, H. Uchida, K. Koterazawa, M. Iwasa, Vacuum 66, 257 (2002) http://dx.doi.org/10.1016/S0042-207X(02)00151-3[Crossref]
  • [27] A.A. Levin et al., J. Alloy. Compd. 347, 171 (2002) http://dx.doi.org/10.1016/S0925-8388(02)00773-9[Crossref]
  • [28] Z. Liu, G. Wang, W. Gao, Mater. Charact. 54, 466 (2005) http://dx.doi.org/10.1016/j.matchar.2005.02.001[Crossref]
  • [29] N. Merakeb, J.-P. Eymery, A. Finidiki, Ph. Goudeau, B. Bouzabata, Mater. Sci. 58, 711 (2004)
  • [30] X. Zhang et al., J. Mater. Res. 19, 1696 (2004) http://dx.doi.org/10.1557/JMR.2004.0215[Crossref]
  • [31] B. Kucharska, Mater. Sci.-Poland 26, 181 (2008)
  • [32] A.D. Pogrebnjak et al., Vacuum 81, 1243 (2007) http://dx.doi.org/10.1016/j.vacuum.2007.01.071[Crossref]
  • [33] M. Danielewski, B. Wierzba, Acta Mater. 58, 6717 (2010) http://dx.doi.org/10.1016/j.actamat.2010.08.037[Crossref]
  • [34] B. Kucharska, Sol. St. Phen. 163, 247 (2010) http://dx.doi.org/10.4028/www.scientific.net/SSP.163.247[Crossref]
  • [35] S. Bac et al., J. X-ray Sci. Technol. 5, 161 (1995) http://dx.doi.org/10.1016/S0895-3996(05)80001-1[Crossref]
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.-psjd-doi-10_2478_s11534-011-0027-2
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.