PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Czasopismo
2011 | 9 | 2 | 372-379
Tytuł artykułu

Mapping of mechanical properties of the surface by utilization of torsional oscillation of the cantilever in atomic force microscopy

Treść / Zawartość
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The measurement of the surface topography in dynamic mode (intermittent contact mode) is one of the most popular ways of imaging surfaces at nanoscale with atomic force microscopy. It also allows obtaining so called phase images which reveal the viscous-elastic non-homogeneities of the surface, therefore can be used for detecting the presence of different materials. It is, however, very difficult to interpret the phase map due to the origin of phenomena, method of signal detection and processing. Therefore one cannot determine whether the observed feature is caused by increase or decrease of any of specific mechanical properties of the surface. In this article we present the modified setup of commercially available AFM, where detection of torsional oscillation of the cantilever is used for the determination of mechanical properties such as: elasticity, adhesion, peak force and energy dissipation. By advanced signal processing, the reconstruction of the force spectroscopy curve and the calculation of mentioned parameters are performed. All the operations are done in real time regime. The developed method allows one to obtain much more complex information about measured surface. Test measurement results are also presented.
Wydawca
Czasopismo
Rocznik
Tom
9
Numer
2
Strony
372-379
Opis fizyczny
Daty
wydano
2011-04-01
online
2011-02-20
Twórcy
  • Electrotechnical Institute Division of Electrotechnology and Materials Science, ul. M. Skłodowskiej-Curie 55/61, 50-369, Wrocław, Poland , sikora@iel.wroc.pl
  • Electrotechnical Institute Division of Electrotechnology and Materials Science, ul. M. Skłodowskiej-Curie 55/61, 50-369, Wrocław, Poland
Bibliografia
  • [1] B. Anczykowski, D. Krueger, H. Fuchs, Phys. Rev. B 53, 485 (1996) http://dx.doi.org/10.1103/PhysRevB.53.15485[Crossref]
  • [2] A. San Paulo, R. Garcia, Phys. Rev. B 66, 041406 (2002) http://dx.doi.org/10.1103/PhysRevB.66.041406[Crossref]
  • [3] U. Rabe, K. Janser, W. Arnold, Rev. Sci. Instrum. 67, 3281 (1996) http://dx.doi.org/10.1063/1.1147409[Crossref]
  • [4] R. Garcia, A. San Palo, Phys. Rev. B 60, 4961 (1999) http://dx.doi.org/10.1103/PhysRevB.60.4961[Crossref]
  • [5] A. San Palo, R. Garcia, Phys. Rev. B 64, 193411 (2001) http://dx.doi.org/10.1103/PhysRevB.64.193411[Crossref]
  • [6] O. Sahin, Rev. Sci. Instrum. 78, 103707 (2007) http://dx.doi.org/10.1063/1.2801009[Crossref]
  • [7] S.B. Smith, Y. Cui, C. Bustamante, Science 271, 795 (1996) http://dx.doi.org/10.1126/science.271.5250.795[Crossref]
  • [8] E. A-Hassan et al., Biophys. J. 74, 1564 (1998) http://dx.doi.org/10.1016/S0006-3495(98)77868-3[Crossref]
  • [9] O. Sahin, S. Magonov, C. Su, C.F. Quate, O. Solgaard, Nat. Nanotechnol. 2, 507 (2007) http://dx.doi.org/10.1038/nnano.2007.226
  • [10] O. Sahin, C.F. Quate, O. Solgaard, A. Atalar, Phys. Rev. B 69, 165416 (2004) http://dx.doi.org/10.1103/PhysRevB.69.165416[Crossref]
  • [11] Y. Song, B. Bhushan, Ultramicroscopy 106, 847 (2006) http://dx.doi.org/10.1016/j.ultramic.2005.12.019[Crossref]
  • [12] R.W. Stark, G. Schitter, M. Stark, R. Guckenberger, A. Stemmer, Phys. Rev. B 69, 085412 (2004) http://dx.doi.org/10.1103/PhysRevB.69.085412[Crossref]
  • [13] O. Sahin, N. Erina, Nanotechnology 19, 445717 (2008) http://dx.doi.org/10.1088/0957-4484/19/44/445717[Crossref]
  • [14] O. Sahin, Phys. Rev. B 77, 115405 (2008) http://dx.doi.org/10.1103/PhysRevB.77.115405[Crossref]
  • [15] J. Legleiter, M. Park, B. Cusick, T. Kowalewski, P. Natl. Acad. Sci. USA 103, 4813 (2006) http://dx.doi.org/10.1073/pnas.0505628103[Crossref]
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.-psjd-doi-10_2478_s11534-010-0127-4
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.