PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Czasopismo
2011 | 9 | 2 | 417-422
Tytuł artykułu

Synthesis and characteristics of nanocrystalline materials in Ti, B, C and N containing system

Treść / Zawartość
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In this work, the results of investigations of manufacturing ceramic materials on the basis of Ti, B, C and N containing systems are presented. The nanocrystalline ceramics were synthesized using a non-hydrolytic sol-gel method. The process was carried out in two stages. In the first low-temperature stage the precursor was obtained. The synthesis of ceramic phases, however, was conducted in the second high-temperature stage, in an argon atmosphere. Depending on the initial composition of the mixtures, the temperature and the time, the following products were obtained: TiCx, TiCxN1−x, TiB2 and B4C. The course of the process was investigated by thermogravimetric and differential scanning calorimetry methods (TG-DSC) coupled with mass spectrometry (MS). The solid state products were identified with use of X-ray diffraction (XRD). The size of the crystallites was estimated by the Scherrer method. The structure and morphology images of nanocrystalline powders were obtained using scanning electron microscopy (SEM) and transmission electron microscopy (TEM).
Słowa kluczowe
Wydawca

Czasopismo
Rocznik
Tom
9
Numer
2
Strony
417-422
Opis fizyczny
Daty
wydano
2011-04-01
online
2011-02-20
Twórcy
  • Institute of Materials Science and Engineering, West Pomeranian University of Technology in Szczecin, Av. Piastow 19, 70-310, Szczecin, Poland, Anna.Biedunkiewicz@zut.edu.pl
  • Institute of Materials Science and Engineering, West Pomeranian University of Technology in Szczecin, Av. Piastow 19, 70-310, Szczecin, Poland
  • Institute of Materials Science and Engineering, West Pomeranian University of Technology in Szczecin, Av. Piastow 19, 70-310, Szczecin, Poland
autor
  • Institute of Materials Science and Engineering, West Pomeranian University of Technology in Szczecin, Av. Piastow 19, 70-310, Szczecin, Poland
  • Institute of Materials Science and Engineering, West Pomeranian University of Technology in Szczecin, Av. Piastow 19, 70-310, Szczecin, Poland
Bibliografia
  • [1] V.J. Tennery, C.B. Finch, C.S. Yust, G. Clark, In: R.K. Viswanadham, D.J. Rowcliffe, J. Gurland (Eds.), Science of Hard Materials (Plenum Press, New York, 1983) 891
  • [2] V.I. Matkovich, G.V. Samsonov, P. Hagenmuller, T. Lundstrom, Boron and refractory borides (Springer-Verlag, New York, 1977) http://dx.doi.org/10.1007/978-3-642-66620-9[Crossref]
  • [3] M.K. Ferber, P.F. Becher, C.B. Finch, J. Am. Ceram. Soc. 66, C2 (1983) http://dx.doi.org/10.1111/j.1151-2916.1983.tb09974.x[Crossref]
  • [4] L. Axelbaum, Metall. Mater. Trans. B28, 1199 (1997)
  • [5] L.S. Sigl, K.A. Schwetz, U. Dworak, Int. J. Refract. Met. Hard Mater. 12, 95 (1994) http://dx.doi.org/10.1016/0263-4368(93)90020-G[Crossref]
  • [6] R. Telle, L. Sigl, K. Takagi, In: R. Riedel (Ed.), Handbook of Ceramic Hard Materials (Wiley-VCH, New York, 2003) 927
  • [7] D. Vallauri, I.C. Atias Adrian, A. Chrysanthou, J. Eur. Ceram. Soc. 28, 1697 (2008) http://dx.doi.org/10.1016/j.jeurceramsoc.2007.11.011[Crossref]
  • [8] X. Zhou, S. Zhang, M. Zhu, B. Chen, Int. J. Self Propag. High Temp. Synth. 7, 403 (1998)
  • [9] D. Brodkin, S. Kalidindi, M. Barsoum, A. Zavaliangos, J. Am. Ceram. Soc. 79, 1945 (1996) http://dx.doi.org/10.1111/j.1151-2916.1996.tb08017.x[Crossref]
  • [10] A.K. Khanra, Bull. Mater. Sci. 30, 93 (2007) http://dx.doi.org/10.1007/s12034-007-0016-7[Crossref]
  • [11] A. Alizadeh, E.T. Nassaj, N. Ehsani, J. Eur. Ceram. Soc. 24, 3277 (2004)
  • [12] A. Sinha, T. Mahata, B.P. Sharma, J. Nucl. Mater. 301, 165 (2002) http://dx.doi.org/10.1016/S0022-3115(02)00704-3[Crossref]
  • [13] L.Z. Pei, H.N. Xiao, J. Mater. Process. Technol. 209, 2122 (2009) http://dx.doi.org/10.1016/j.jmatprotec.2008.05.003[Crossref]
  • [14] A.J. Li, Y.H. Zhen, Q. Yin, L.P. Ma, Y.S. Yin, Ceram. Int. 32, 849 (2006) http://dx.doi.org/10.1016/j.ceramint.2005.05.022[Crossref]
  • [15] A. Gursoy, K. Ferhat, T. Servet, J. Eur. Ceram. Soc. 23, 1243 (2003) http://dx.doi.org/10.1016/S0955-2219(02)00304-7[Crossref]
  • [16] S.H. Kang, D.J. Kim, J. Eur. Ceram. Soc. 27, 715 (2007) http://dx.doi.org/10.1016/j.jeurceramsoc.2006.04.053[Crossref]
  • [17] L. Shi et al., Solid State Commun. 1, 5 (2003) http://dx.doi.org/10.1016/S0038-1098(03)00627-6[Crossref]
  • [18] A. Biedunkiewicz, J. Sol-GelSci. Technol. (in press)
  • [19] A. Biedunkiewicz, M. Wysiecki, P. Noworol, Polish Patent P200978 (2008)
  • [20] J.I. Langford, A.J.C. Wilson, J. Appl. Crystallogr. 11, 102 (1978) http://dx.doi.org/10.1107/S0021889878012844[Crossref]
  • [21] A.S. Kurlo, A.I. Guse, Glass Phys. Chem. 33, 276 (2007) http://dx.doi.org/10.1134/S1087659607030169[Crossref]
  • [22] A. Biedunkiewicz, P. Figiel, M. Sabara, Mater. Sci. (in press)
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.-psjd-doi-10_2478_s11534-010-0121-x
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.