Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2006 | 4 | 2 | 178-186
Tytuł artykułu

Changes of thermal, mechanical and magnetic properties of an amorphous Fe80Cr5B15 alloy during magnetic and structural phase transitions

Treść / Zawartość
Warianty tytułu
Języki publikacji
Thermal, mechanical and thermomagnetic properties associated with the magnetic and structural transition of an amorphous Fe80Cr5B15 alloy are described. The investigation was carried out in a simultaneous dilatometric and thermomagnetic experiment. An anomaly of the thermal expansion coefficient at the Curie point and a change in mechanical properties just before the onset of crystallization are observed. The results are compared with the thermal behavior obtained by differential scanning calorimetry.

Opis fizyczny
  • Research Institute for Solid State Physics and Optics, Hungarian Academy of Sciences, 1525, Budapest, POB 49, Hungary,
  • Vacuum Technology Transfer Center, Technical University of Koszalin, 75-620, Koszalin, Poland
  • [1] A. Lovas, L.F. Kiss, F. Sommer and É. Zsoldos: “Comparison of the thermal and thermomagnetic effects during devitrification of glassy Fe86B14 and Fe83.6Cr2.4B14 alloys”, In: P. Duhaj, P. Mrafko and P. Svec (Eds.): Suppl to the Proc 9 th Int. Conf. on Rapidly Quenched and Metastable Alloys, Bratislava, (Slovakia), 1996, Elsevier, Amsterdam, 1997, pp. 329–332.
  • [2] H.H. Liebermann, C.D. Graham and P.J. Flanders: “Changes in Curie Temperature, Physical Dimensions, and Magnetic Anisotropy During Annealing of Amorphous Magnetic Alloys”, IEEE. Trans. Magn., Vol. 13, (1977), pp. 1541–1543.[Crossref]
  • [3] H.S. Chen: “The evidence of structural relaxation as the origin of Curie temperature aging in metallic glass”, J. Appl. Phys., Vol, 49(8), (1978), pp. 4595–4597.[Crossref]
  • [4] M.A. Marcus: “Electrical resistometric detection of relaxation in an amorphous Pd-Si-Sb alloy”, Acta Metallurgica, Vol. 27, (1979), pp. 879–891.[Crossref]
  • [5] H.A. Brooks: “Thermal expansion of amorphous metal alloys”, J. Appl. Phys., Vol. 49(1), (1978), pp. 213–214.[Crossref]
  • [6] P. Kamasa, A. Buzin, M. Pyda, J. Kovac, Á. Cziráki, A. Lovas and I. Bakonyi: “Temperature-modulated thermal and magnetic analysis of amorphous alloys around magnetic and structural phase transitions”, J. Magn. Magn. Mater., Vol. 257, (2003), pp. 274–283.[Crossref]
  • [7] P. Myśliński, P. Kamasa and J. Vandlik: “Analysis of alloys using DTA and TD methods with simultaneous thermomagnetic studies”, J. Therm. Anal. Calorim., Vol. 56(2), (1999), pp. 233–238.[Crossref]
  • [8] P. Kamasa, L.K. Varga, É. Kisdi-Koszó and J. Vandlik: “Complex testing system for ferromagnetic materials by thermomagnetic measurement”, In: P. Duhaj, P. Mrafko and P. Svec (Eds.): Suppl to the Proc 9 th Int Conf on Rapidly Quenched and Metastable Alloys, Bratislava, (Slovakia), 1996, Elsevier, Amsterdam, 1997, pp. 280–283.
  • [9] P. Kamasa: Technical Note, Research Institute for Physics and Optics, Hungarian Academy of Sciences, Budapest, 2004,
  • [10] B. Wunderlich: Thermal Analysis, Academic Press, New York, 1990, Chapter 5.
  • [11] K. Fukamichi, K. Shirakawa, T. Kaneko and T. Masumoto: “Pressure effect on the Curie temperature and high-field susceptibility of FeCrB amorphous Invar alloy”, J. Appl. Phys., Vol. 53(3), (1982), pp. 2246–2248.[Crossref]
  • [12] B.S. Berry: “Elastic and anelastic behavior”, In: J.J. Gilman and H.J. Leamy (Eds.): Metallic Glasses, ASM, Metals Park, Ohio, 1978, p. 161–189.
Typ dokumentu
Identyfikator YADDA
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.