PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Czasopismo
2014 | 12 | 9 | 968-975
Tytuł artykułu

Morphology and thermal stability of bacterial cellulose/collagen composites

Treść / Zawartość
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The aim of this paper was to prepare composites of bacterial cellulose (BC) and collagen to evaluate both the effect of collagen on the morphological, mechanical and thermal properties of BC and the effect of BC on the thermal stability of collagen for designing composites with increased potential biomedical applications. Two series of composites were prepared, the first series by immersing BC pellicle in solutions of collagen obtained in three forms, collagen gel (CG), collagen solution (CS) and hydrolysed collagen (HC), followed by freeze drying; and the second series of composites by mixing BC powder in solutions of collagen (CG, CS and HC), also followed by freeze drying. The properties of obtained composites were evaluated by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), mechanical tests, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results revealed that BC acts as a thermal stabilizer for CS matrix, while with CG matrix it interacts synergistically leading to composites with improved properties. On the other hand, the BC sheet impregnated with collagen has a significantly improved thermal stability. Collagen (as HC, CS or CG) has also a positive influence on the mechanical properties of lyophilized BC sheet. A four times increase of modulus was observed in BC/HC and BC/CG composites. and an increase of 60 times for BC/CS. The spectacular increase of elastic modulus and tensile strength in the case of BC/CS composite was explained by the easier penetration of collagen solution in the BC network and impregnation of BC fibrils as revealed by SEM and AFM analyzes.
Słowa kluczowe
Wydawca

Czasopismo
Rocznik
Tom
12
Numer
9
Strony
968-975
Opis fizyczny
Daty
wydano
2014-09-01
online
2014-05-01
Twórcy
autor
  • National R&D Institute for Chemistry and Petrochemistry-ICECHIM
  • Center for Organic Chemistry “C.D. Nenitescu” of Romanian Academy
  • National R&D Institute for Chemical Pharmaceutical
  • National R&D Institute for Chemistry and Petrochemistry-ICECHIM
Bibliografia
  • [1] M. Shoda, Y. Sugano, Biotechnol. Bioprocess Eng. 10, 1 (2005) http://dx.doi.org/10.1007/BF02931175[Crossref]
  • [2] A.J. Brown, J. Chem. Soc. Trans. 49, 432 (1886) http://dx.doi.org/10.1039/ct8864900432[Crossref]
  • [3] J.R.M. Brown, I.M. Saxena, Cellulose: Molecular and Structural Biology (Springer, Netherlands, 2007) Chapter 17 http://dx.doi.org/10.1007/978-1-4020-5380-1[Crossref]
  • [4] P. Ross, R. Mayer, M. Benziman, Microbiol. Rev. 55, 35 (1991)
  • [5] F. Yoshinaga, N. Tonouchi, K. Watanabe, Biosci. Biotechnol. Biochem. 61, 219 (1997) http://dx.doi.org/10.1271/bbb.61.219[Crossref]
  • [6] P.R. Chawla, I.B. Bajaj, S.A. Survase, R.S. Singhal, Food Technol. Biotechnol. 47, 107 (2009)
  • [7] W. Czaja, A. Krystynowicz, S. Bielecki, R.M. Brown Jr., Biomaterials 27,145 (2006) [PubMed]
  • [8] J.D. Fontana, A.M. de Sousa, C.K. Fontana, I.L. Torriani, J.C. Moreschi, B.J. Gallotti, S.J. de Sousa, G.P. Narcisco, J.A. Bichara, L.F. Farah, Appl. Biochem. Biotechnol. 24, 253 (1990) http://dx.doi.org/10.1007/BF02920250[Crossref]
  • [9] D. Klemm, D. Schumann, U. Udhardt, S. Marsch, Prog. Polym. Sci. 26, 1561 (2001) http://dx.doi.org/10.1016/S0079-6700(01)00021-1[Crossref]
  • [10] A. Svensson, E. Nicklasson, T. Harrah, B. Panilaitis, D.L. Kaplan, M. Brittberg, P. Gatenholm, Biomaterials 26, 419 (2005) http://dx.doi.org/10.1016/j.biomaterials.2004.02.049[Crossref]
  • [11] O.M. Alvarez, M. Patel, J. Booker, L. Markowitz, Wounds 16, 224 (2004)
  • [12] Z. Cai, G. Yang, J. Appl. Polym. Sci. 120, 2938 (2011) http://dx.doi.org/10.1002/app.33318[Crossref]
  • [13] G. Molina de Olyveira, D.P. Valido, L.M.M. Costa, P.B.P. Gois, L.X. Filho, P. Basmaji, J. Biomater. Nanobiotechnol. 2, 239 (2011)
  • [14] H. Luo, G. Xiong, Y. Huang, F. He, Y. Wang, Y. Wan, Mater. Chem. Phys. 110, 193 (2008) http://dx.doi.org/10.1016/j.matchemphys.2008.01.040[Crossref]
  • [15] F.G. Torres, S. Commeaux, O.P. Troncoso, J. Funct. Biomater. 3, 864 (2012) http://dx.doi.org/10.3390/jfb3040864[Crossref]
  • [16] A.P. Mathew, K. Oksman, D. Pierron, M.-F. Harmand, Macromol. Biosci. 13, 289 (2013) http://dx.doi.org/10.1002/mabi.201200317[Crossref]
  • [17] V. Trandafir, G. Popescu, M. G. Albu, H. Iovu, M. Georgescu, Collagen based bioproducts (Ars Docendi, Bucharest, Romania, 2007) ISBN 978-973-558-291-3
  • [18] M.G. Albu, Collagen gels and matrices for biomedical applications (LAP LAMBERT Academic Publishing GmbH & Co. KG, Saarbrucken, Germany, 2011) ISBN 978-3-8443-3057-1
  • [19] L.J. Bellamy, The Infrared Spactra of Complex Molecules (John Wiley and Sons, Inc., New York, N.Y., 1966)
  • [20] S. Krimm, J. Bandekar, Adv. Protein Chem. 38, 181 (1986) http://dx.doi.org/10.1016/S0065-3233(08)60528-8[Crossref]
  • [21] B. Surma-Ślusarska, S. Presler, D. Danielewicz, FIBRES & TEXTILES in Eastern Europe, 16(4), 108 (2008)
  • [22] S. Yamanaka, K. Watanabe, N. Kitamura, M. Iguchi, S. Mitsuhashi, Y. Nishi, M. Uryu, J. Mater. Sci. 24, 3141 (1989) http://dx.doi.org/10.1007/BF01139032[Crossref]
  • [23] Y. Nishi, M. Uryu, S. Yamanaka, K. Watanabe, N. Kitamura, M. Iguchi, S. Mitsuhashi, J. Mater. Sci. 25, 2997 (1990) http://dx.doi.org/10.1007/BF00584917[Crossref]
  • [24] K-C. Cheng, J. M. Catchmark, A. Demirci, Cellulose 16, 1033 (2009) http://dx.doi.org/10.1007/s10570-009-9346-5[Crossref]
  • [25] Y. C. Hsieh, H. Yano, M. Nogi, S. J. Eichhorn, Cellulose 15, 507 (2008) http://dx.doi.org/10.1007/s10570-008-9206-8[Crossref]
  • [26] H. Sehaqui, Q. Zhou, L. A. Berglund, Compos. Sci. Technol. 71, 1593 (2011) http://dx.doi.org/10.1016/j.compscitech.2011.07.003[Crossref]
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.-psjd-doi-10_2478_s11532-014-0545-z
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.