Czasopismo
Tytuł artykułu
Autorzy
Warianty tytułu
Języki publikacji
Abstrakty
Production of new catalysts requires effective analytical quality control. The study of trace element composition of heterogeneous catalysts, based on C+PdO, using atomic emission spectrometry (AES) was carried out. A new method for the direct solid-state analysis by means of AES with direct current arc discharge was developed. On the basis of the qualitative analysis of elements, Al, Fe, Ni, Si and Ti have been identified, and for these elements, the quantitative method of determination has been developed. Optimization of excitation parameters and validation of the analytical method are presented. Calibration samples of the following composition were prepared: graphite powder (as a matrix), 3% of PdO and increasing contents of determined element oxides (spectrally pure). Calibrations were calculated by means of the least squares method. Working range for element impurities was from 1% to 0.0003%, and the limits of quantification - LOQ, (10-σ criterion) varied in the range from 0.002% (Ti) to 0.0038% (Si). For the control of active component, palladium was calibrated (working range - 0.01%–10.00%; LOQ −0.027%). The developed method can be used, also, for the elemental determinations of the other carbon based catalysts with the different active components (of platinum group elements).
Czasopismo
Rocznik
Tom
Numer
Strony
678-686
Opis fizyczny
Daty
wydano
2014-06-01
online
2014-03-13
Twórcy
autor
- Pavol Jozef Šafárik University in Košice
autor
- Pavol Jozef Šafárik University in Košice, viera.vojtekova@upjs.sk
autor
- Technical University of Košice
autor
- Pavol Jozef Šafárik University in Košice
autor
- Technical University of Košice
autor
- Technical University of Košice
autor
- Technical University of Košice
Bibliografia
- [1] A.J. Lincoln, E.N. Davis, Anal. Chem. 31, 1317 (1959) http://dx.doi.org/10.1021/ac60152a020[Crossref]
- [2] B.E. Artz, X-Ray Spectrometry 6, 165 (1977) http://dx.doi.org/10.1002/xrs.1300060312[Crossref]
- [3] K. Van Meel, A. Smekens, M. Behets, P. Kazandjian, R. Van Grieken, Anal. Chem. 79, 6383 (2007) http://dx.doi.org/10.1021/ac070815r[Crossref]
- [4] Datasheet N3 8-306 05/2008, Analysis of Precious Metals in Automobile Catalytic Converters (Thermo Fisher Scientific Inc., 2008) www.thermo.com/niton
- [5] Datasheet 8-316 07/2012, Determination of Platinum, Palladium, and Rhodium in Spent Automotive Catalytic Converters (Thermo Fisher Scientific Inc., 2012)
- [6] F.M. Pennebaker, M. Bonner Denton, Appl. Spectrosc. 55, 504 (2001) http://dx.doi.org/10.1366/0003702011952037[Crossref]
- [7] S. Recknagel, Accred. Qual. Assur. 14, 277 (2009) http://dx.doi.org/10.1007/s00769-009-0508-9[Crossref]
- [8] N.M. Potter, Anal. Chem. 48, 531, (1976) http://dx.doi.org/10.1021/ac60367a016[Crossref]
- [9] M. Merdivan, R.S. Aygün, N. Külcü, Atomic Spectroscopy 18, 122 (1997)
- [10] F. Sánchez-Rojas, C. Bosh Ojeda, J.M. Cano Pavón, Ann. Chim. 95, 437 (2005) http://dx.doi.org/10.1002/adic.200590050[Crossref]
- [11] E.N. Gilbert, G.V. Veriovkin, V.I. Semenov, V.A. Mikhailov, J. Radioanal. Chem. 38, 229 (1977) http://dx.doi.org/10.1007/BF02520201[Crossref]
- [12] K.R. Williams, J. Radioanal. Nucl. Chem. 212, 361 (1996) http://dx.doi.org/10.1007/BF02162651[Crossref]
- [13] M.R. Winchester, S.M. Hayes, R.K. Markus, Spectrochim. Acta, Part B 46, 615 (1991) http://dx.doi.org/10.1016/0584-8547(91)80065-B[Crossref]
- [14] J.A. Brown Jr., F.W. Kuntz, R.K. Belitz, J. Anal. At. Spectrom. 6, 33 (1991) http://dx.doi.org/10.1039/ja9910600393[Crossref]
- [15] E.S. Beary, P.J. Paulsen, Anal. Chem. 67, 3193 (1995) http://dx.doi.org/10.1021/ac00114a015[Crossref]
- [16] O.V. Borisov, D.M. Coleman, R.O. Carter III, J. Anal. At. Spectrom. 12, 231 (1997) http://dx.doi.org/10.1039/a605142a[Crossref]
- [17] O.V. Borisov, D.M. Coleman, K.M. Oudsema, R.O. Carter III, J. Anal. At. Spectrom. 12, 239 (1997) http://dx.doi.org/10.1039/a605159f[Crossref]
- [18] D.M. Wayne, J. Anal. At. Spectrom. 12, 1195 (1997) http://dx.doi.org/10.1039/a701959i[Crossref]
- [19] L.A. Simpson, R. Hearn, T. Catterick, J. Anal. At. Spectrom. 19, 1244 (2004) http://dx.doi.org/10.1039/b403184a[Crossref]
- [20] A. Zhang, X. Liu, Spectroscopy Letters 39, 447 (2006) http://dx.doi.org/10.1080/00387010600820080[Crossref]
- [21] P. Lucena, J.M. Vadillo, J.J. Laserna, Appl. Spectrosc. 55, 267 (2001) http://dx.doi.org/10.1366/0003702011951876[Crossref]
- [22] V. Kanický, V. Otruba, J.M. Mermet, Talanta 48, 859 (1999) http://dx.doi.org/10.1016/S0039-9140(98)00102-7[Crossref]
- [23] C. Bosh Ojeda, F.S. Rojas, Talanta 71, 1 (2007) http://dx.doi.org/10.1016/j.talanta.2006.04.024[Crossref]
- [24] TJA AtomComp 2000 DC ARC Spectrometer, “Manual literature” (Operation manual) supplied with the instrument (Thermo Jarrell Ash Corporation, 1995)
- [25] M. Rossbach, P. Ostapczuk, H. Emons, Fres. J. Anal. Chem. 360, 380 (1998) http://dx.doi.org/10.1007/s002160050717[Crossref]
- [26] R. Nowka, H. Müller, Fres. J. Anal. Chem. 359, 132 (1997) http://dx.doi.org/10.1007/s002160050549[Crossref]
- [27] S. Kromidas, Validierung in der Analytik (Wiley-VCH, Weinheim, 1999) (In German)
- [28] M. Hamborská, Validation of non-standard methods of atomic spectrometry for long-term monitoring of heavy metals in the environment, PhD Thesis (Technical University of Košice, Košice, 2013) (in Slovak)
- [29] A. N. Zajdeľ, V.K. Prokofjev, S.M. Rajskij, V.A. Slavnyj, E. Ja. Šrejder, Tablici spektraľnych linij (Nauka, Moskva, 1969) (in Russian)
- [30] K. Flórián, K. Zimmer, Spectrochim. Acta B, 41, 1025 (1986) http://dx.doi.org/10.1016/0584-8547(86)80124-0[Crossref]
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.-psjd-doi-10_2478_s11532-014-0519-1