CaZrO3-based powders suitable for manufacturing electrochemical oxygen probes

• Autorzy: Magdalena Dudek , Alicja Rapacz-Kmita
• Języki publikacji: EN

Abstrakty

EN

Calcium zirconate powders doped with a small amount of CaO were synthesised using the Pechini method. X-ray analysis revealed that solid solution was formed in the concentration up to 51.5% mol CaO. For synthesis of stoichiometric CaZrO3, the highest temperature was required (1150°C), but introduction of excess CaO from 50.5 to 51.5% mol enabled us to lower the synthesis temperature to 800°C. The sintering behaviour of such samples under non-isothermal conditions was studied by dilatometric methods. Deviations were found in stoichiometry; by increasing the CaO concentration in CaZrO3 sinterability improved in comparison to CaZrO3 with stoichiometric composition. The presence of CaO as second phase caused deterioration of the sinterability of the CaZrO3-based samples. Pellets sintered at 1500°C for 2 h reached 96–98% of theoretical density. SEM and TEM observations were used to characterise the microstructure of the prepared samples. The electrical properties of CaZrO3-based samples were investigated by the AC-impedance spectroscopy method. It was found that introduction of excess CaO into the CaZrO3 structure caused an increase in ionic conductivity up to the solubility limit. The possibility of using CaZrO3-based samples for constructing prototype electrochemical oxygen probes to determine activity of oxygen dissolved in molten copper is also demonstrated. [...]

Słowa kluczowe

EN

CaZrO3; Electrochemical oxygen probe; Ionic conductivity; Electrolyte

• Czasopismo: Open Chemistry
• Rocznik: 2013
• Tom: 11
• Numer: 12
• Strony: 2088-2097

Daty

wydano

2013-12-01

online

2013-09-26

Twórcy

autor

Magdalena Dudek

• Faculty of Fuels and Energy, AGH-University of Science and Technology, 30-059, Cracow, Poland,

autor

Alicja Rapacz-Kmita

• Faculuty of Materials Science and Ceramics, AGH-University of Science and Technology, 30-059, Cracow, Poland

Bibliografia

• [1] J. Szczerba, Z. Pędzich, Ceramic International 36, 535 (2010) http://dx.doi.org/10.1016/j.ceramint.2009.09.025[Crossref]
• [2] A. Obregón, J. L. Rodríguez-Galicia, J. L. Cuevas, P. Pena, C. Baudin, J. Eur. Ceram. Soc. 31, 61 (2011) http://dx.doi.org/10.1016/j.jeurceramsoc.2010.08.020[Crossref]
• [3] C. Gargori, S. Cerro, R. Galindo, A. García, M. Llusar, G. Monrós, Ceramic International 38, 4453 (2012) http://dx.doi.org/10.1016/j.ceramint.2012.02.019[Crossref]
• [4] J.E. Contreras, G.A. CastilloT, E.A. Rodrıguez, T.K. Das, A.M. Guzman, Materials Characterization 54, 354 (2005) http://dx.doi.org/10.1016/j.matchar.2004.12.005[Crossref]
• [5] M.A. Pena, J.L.G. Fierro, Chem. Rev. 101, 1981 (2001) http://dx.doi.org/10.1021/cr980129f[Crossref]
• [6] J.G. Cheng, J.S. Zhou, J.B. Goodenough, Y. Sui, Y. Ren, M.R. Suchomel, Phys. Rev. B 83 644 (2011)
• [7] V.M. Orera, J.I. Pena, R.I. Merino, J.A. Lazaro, J.A. Valles, M.A. Rebolledo, Appl. Phys. Lett. 71, 2746 (1997) http://dx.doi.org/10.1063/1.120200[Crossref]
• [8] R.I. Merino, R.A. Pardo, J.I. Pena, G.F. De la Fuente, A. Larrea, V.M. Orera, Phys. Rev. B56, 10907 (1997)
• [9] R. Balda, S. García-Revilla, J. Fernańdez, R.I. Merino, J.I. Penã, V.M. Orera, J. Luminescence 129, 1422 (2009) http://dx.doi.org/10.1016/j.jlumin.2009.01.024[Crossref]
• [10] Y. Suzuki, H.J. Hwang, N. Kondo, T. Ohji, J. Am. Ceram. Soc. 84, 2713 (2001) http://dx.doi.org/10.1111/j.1151-2916.2001.tb01079.x[Crossref]
• [11] Y. Suzuki, N. Kondo, T. Ohji, J. Am. Ceram. Soc. 86, 1128 (2003) http://dx.doi.org/10.1111/j.1151-2916.2003.tb03435.x[Crossref]
• [12] P. Stoch, J. Szczerba, J. Lis, D. Madej, Z. Pędzich, J. Eur. Ceram. Soc. 32, 665 (2012) http://dx.doi.org/10.1016/j.jeurceramsoc.2011.10.011[Crossref]
• [13] T. Yajima, K. Koide, N. Fukatsu, T. Ohashi, H. Iwahara, Sensors and Actuators B: Chemical, 14(1–3), 697 (1993) http://dx.doi.org/10.1016/0925-4005(93)85149-5[Crossref]
• [14] R.A. Davies, M.S. Islam, J.D. Gale, Solid State Ionics 126, 323 (1999) http://dx.doi.org/10.1016/S0167-2738(99)00244-1[Crossref]
• [15] R.A. Davies, M.S. Islam, A.V. Chadwick, G.E. Rush, Solid State Ionics 130, 115 (2000) http://dx.doi.org/10.1016/S0167-2738(00)00573-7[Crossref]
• [16] W. Englen, A. Buekenhoutd, Solid State Ionics 96, 55 (1997) http://dx.doi.org/10.1016/S0167-2738(96)00615-7[Crossref]
• [17] D. Janke, Metallurgical Transactions 13B, 227 (1982) [Crossref]
• [18] A. Weyl, S. Wei, D. Janke, Steel research 65, 167 (1994)
• [19] G. Róg, M. Dudek, A. Kozłowska-Róg, M. Bućko, Electrochimica Acta 47, 4523 (2002) http://dx.doi.org/10.1016/S0013-4686(02)00540-6[Crossref]
• [20] M. Dudek, E. Drożdż-Cieśla, J. Alloys Comp. 475, 846 (2009) http://dx.doi.org/10.1016/j.jallcom.2008.08.020[Crossref]
• [21] M. Dudek, Materials Research Bulletin 44 1879 (2009) http://dx.doi.org/10.1016/j.materresbull.2009.05.008[Crossref]
• [22] S. González-López, A. Romero-Serrano, R. Vargas-García, B. Zeifert, A. Cruz-Ramírez, Revista de Metalurgia 46, 219 (2010) http://dx.doi.org/10.3989/revmetalm.0927[Crossref]
• [23] M. Pollet, S. Marinel, G. Desgardin, J. Eur. Ceram. Soc. 24, 119 (2004) http://dx.doi.org/10.1016/S0955-2219(03)00122-5[Crossref]
• [24] X. Guo, Computational Materials Science 20, 168 (2001) http://dx.doi.org/10.1016/S0927-0256(00)00174-9[Crossref]
• [25] M.C. Martin, M.L. Mecartney, Solid State Ionics 161, 67 (2003) http://dx.doi.org/10.1016/S0167-2738(03)00265-0[Crossref]
• [26] M. Dudek, Advances in Materials Science 1,14 (2008).
• [27] M. Dudek, M. Bućko, Solid State Ionics 157, 183, (2003) http://dx.doi.org/10.1016/S0167-2738(02)00207-2[Crossref]
• [28] M. Dudek, W. Bogusz, Ceramics, Polish Ceramic Bulletin 91, 168 (2005)
• [29] M. Dudek, G. Róg, W. Bogusz, A. Kozłowska -Róg, M.M. Bućko, Ł. Zych, Materials Science-Poland 24, 253 (2006)
• [30] S.Ch. Hwang, G.M. Choi, Solid State Ionics 179, 1042 (2008) http://dx.doi.org/10.1016/j.ssi.2007.11.034[Crossref]
• [31] S.Ch. Hwang, G.M. Choi, Solid State Ionics 177, 3099 (2006) http://dx.doi.org/10.1016/j.ssi.2006.08.002[Crossref]

Identyfikatory

DOI

10.2478/s11532-013-0332-2