Characteristics of polyurethane-based sustained release membranes for drug delivery

• Autorzy: Mihaela Mândru , Constantin Ciobanu , Stelian Vlad , Maria Butnaru , Laurent Lebrun , Marcel Popa
• Języki publikacji: EN

Abstrakty

EN

This paper is focused on the preparation and physicochemical characterization of two poly(ester ether urethane)s with rifampicin in their matrix and different molar concentrations of urethane groups. The polyurethanes with rifampicin were processed as asymmetrical microporous membranes by a phase inversion method and characterized by attenuated total reflection - Fourier transform infrared (ATR-FTIR) spectroscopy and differential scanning calorimetry (DSC). The influence of the surface morphology in the release of drug compounds was analyzed by scanning electron microscopy (SEM), atomic force microscopy (AFM), contact angle, and water uptake. The release of rifampicin depends on the molar concentration of urethane groups and also on the surface morphology of the polyurethane membranes. The antibacterial activity was evaluated with S. Epidermidis RP 62 A and P. Aeruginosa ATCC 1544. Finally, the biocompatibility of the polyurethane membranes was studied with human dermal fibroblasts (HDF) to evaluate the potential biomedical applications. [...]

Słowa kluczowe

EN

Surface morphology; Sustained release; Polyurethane membrane

• Czasopismo: Open Chemistry
• Rocznik: 2013
• Tom: 11
• Numer: 4
• Strony: 542-553

Daty

wydano

2013-04-01

online

2013-01-23

Twórcy

autor

Mihaela Mândru

• Faculty of Chemical Engineering and Environmental Protection, ”Gh. Asachi” Technical University, 700050, Iasi, Romania

autor

Constantin Ciobanu

• “Petru Poni” Institute of Macromolecular Chemistry, 700487, Iasi, Romania

autor

Stelian Vlad

• “Petru Poni” Institute of Macromolecular Chemistry, 700487, Iasi, Romania,

autor

Maria Butnaru

• Faculty of Medical Bioengineering, Gr.T.Popa” University of Medicine and Pharmacy, 700115, Iasi, Romania

autor

Laurent Lebrun

• University of Rouen UMR 6270 CNRS, Polymers, Biopolymersm, Surfaces, 76821, Mont Saint Aignan Cedex, France

autor

Marcel Popa

• Faculty of Chemical Engineering and Environmental Protection, ”Gh. Asachi” Technical University, 700050, Iasi, Romania

Bibliografia

• [1] J.-P. Yu, G. Xin, S.-J. Yao, Z.-Q. Zhu, Ind. Eng. Chem. Res. 50, 13813 (2011) http://dx.doi.org/10.1021/ie201294u[Crossref]
• [2] J.E. Kim, S.R. Kim, S.H. Lee, C.H. Lee, D.D. Kim, Int. J. Pharm. 201, 29 (2000) http://dx.doi.org/10.1016/S0378-5173(00)00388-4[Crossref]
• [3] V. Ruggeri, I. Francolini, G. Donelli, A. Piozzi, J. Biomed. Mater. Res.B. 81, 287 (2007) [Crossref]
• [4] N.A. Salahuddin, A.A. El-Barbary, N.I. Abdo, Polym. Advan. Technol. 20, 122 (2009) http://dx.doi.org/10.1002/pat.1284[Crossref]
• [5] S.A. Deilami, M. Abdouss, S. R. Seyedi, Cent. Eur. J. Chem. 8, 687 (2010) http://dx.doi.org/10.2478/s11532-010-0035-x[Crossref]
• [6] J.M. Schierholz, H. Steinhauser, A.F.E. Rumps, R. Berkels, G. Pulverer, Biomaterials 18, 839 (1997) http://dx.doi.org/10.1016/S0142-9612(96)00199-8[Crossref]
• [7] B.S. Rao, K.V. R. Murthy, Int. J. Pharm. 231, 97 (2002) http://dx.doi.org/10.1016/S0378-5173(01)00874-2[Crossref]
• [8] P. Basak, B. Adhikari, I. Banerjee, T. K. Maiti, J. Mater. Sci.-Mater. M. 20, S213 (2009) http://dx.doi.org/10.1007/s10856-008-3521-3[Crossref]
• [9] D.P. Otto, H.C.M. Vosloo, W. Liebenberg, M. M. de Villiers, Eur. J. Pharm. Biopharm. 69, 1121 (2008) http://dx.doi.org/10.1016/j.ejpb.2008.02.004[Crossref]
• [10] G. Kidane, G. Burriesci, M. Edirisinghe, H. Ghanbari, P. Bonhoeffer, A.M. Seifalian, Acta Biomater. 5, 2409 (2009) http://dx.doi.org/10.1016/j.actbio.2009.02.025[Crossref]
• [11] L. Xue, H.P. Greisler, J. Vasc. Surg. 37, 472 (2003) http://dx.doi.org/10.1067/mva.2003.88[Crossref]
• [12] S. Rosenheck, Z. Sharon, D. Leibowitz, Europace 2, 60 (2000) http://dx.doi.org/10.1053/eupc.1999.0062[Crossref]
• [13] T.C. Lucas, R.L. Orefice, App. Surf. Sci. 256, 1419 (2009) http://dx.doi.org/10.1016/j.apsusc.2009.08.102[Crossref]
• [14] M. Mandru, C. Ciobanu, M.E. Ignat, M. Popa, L. Verestiuc, S. Vlad, Dig. J. Nanomater. Bios. 6, 1227 (2011)
• [15] B.A. Butruk, P.A. Ziętek, T. Ciach, Cent. Eur. J. Chem. 9, 1039 (2011) http://dx.doi.org/10.2478/s11532-011-0094-7[Crossref]
• [16] E.O. Batyrbekov, L.B. Rukhina, B.A. Zhubanov, N.F. Bekmukhamedova, G.A. Smailova, Polym. Int. 43, 317 (1997) http://dx.doi.org/10.1002/(SICI)1097-0126(199708)43:4<317::AID-PI741>3.0.CO;2-W[Crossref]
• [17] D.D. Kim, M.M. Takeno, B.D. Ratner, T.A. Horbett, Pharm. Res. 15, 783 (1998) http://dx.doi.org/10.1023/A:1011917224044[Crossref]
• [18] J.R. DesNoyer, A.J. McHugh, J. Control. Release 86, 15 (2003) http://dx.doi.org/10.1016/S0168-3659(02)00293-6[Crossref]
• [19] I.A. Paun, A. Moldovan, C.R. Luculescu, M. Dinescu, App. Surf. Sci. 257, 10780 (2011) http://dx.doi.org/10.1016/j.apsusc.2011.07.097[Crossref]
• [20] C. Ciobanu, X. Han, C.N. Cascaval, F. Guo, D. Rosu, L. Ignat, G. Moroi, J. Appl. Polym. Sci. 87, 1858 (2003) http://dx.doi.org/10.1002/app.11509[Crossref]
• [21] A. D. McNaught, A. Wilkinson, IUPAC Compendium of Chemical Terminology, Second Edition, Blackwell Science (1997) ISBN 0865426848
• [22] D. Macocinschi, D. Filip, S. Vlad, A.M. Oprea, C.A. Gafitanu, App. Surf. Sci. 259, 416 (2012) http://dx.doi.org/10.1016/j.apsusc.2012.07.060[Crossref]
• [23] D.S. Jones, C.P. McCoy, G.P. Andrews, Chem. Eng. J. 17, 1088 (2011) http://dx.doi.org/10.1016/j.cej.2011.05.024[Crossref]
• [24] S. Agrawal, Y. Ashokraj, P. Bharatam, O. Pillai, R. Panchagnula, Eur. J. Pharm. Sci. 22, 127 (2004) http://dx.doi.org/10.1016/j.ejps.2004.02.011[Crossref]
• [25] S.J. Asha, B.P.R. Sathesh, G. Divakar, K.J. Manoj, K.K. Purohit, J. Curr. Pharmaceut. Res. 1, 31 (2010)
• [26] S. Vlad, M. Butnaru, D. Filip, D. Macocinschi, A. Nistor, L.M. Gradinaru, C. Ciobanu, Dig. J. Nanomater. Bios. 5, 1089 (2010)
• [27] M. Stamm, Polymer Surfaces and Interfaces. Characterization, Modification and Applications, (Springer, Berlin, 2008) http://dx.doi.org/10.1007/978-3-540-73865-7[Crossref]
• [28] H.Y. Erbil, Surface Chemistry of Solid and Liquid Interfaces (Blackwell Publishing, England, 2006)
• [29] P. Alves, J.F.J. Coelho, J. Haack, A. Rota, A. Bruinink, M.H. Gil, Eur. Polym. J. 45, 1412 (2009) http://dx.doi.org/10.1016/j.eurpolymj.2009.02.011[Crossref]
• [30] H. Yasuda, E.J. Charlson, E.M. Charlson, T. Yasuda, M. Miyama, T. Okuno, Langmuir 7, 2394 (1991) http://dx.doi.org/10.1021/la00058a070[Crossref]
• [31] K.M. Zia, M. Barikan, M. Zuber, I.A. Bhatti, M. Barmar, Int. J. Biol. Macromol. 44, 182 (2009) http://dx.doi.org/10.1016/j.ijbiomac.2008.12.004[Crossref]
• [32] J.H. Park, K.B. Lee, I.C. Kwon, Y.H. Bae, J.Biomat. Sci.-Polym. E. 12, 629 (2001) http://dx.doi.org/10.1163/156856201316883458[Crossref]
• [33] H. van de Belt, D. Neut, D.R.A. Uges, W. Schenk, J.R. van Horn, H.C. van der Mei, H.J. Busscher, Biomaterials 21, 1981 (2000) http://dx.doi.org/10.1016/S0142-9612(00)00082-X[Crossref]
• [34] M. Ding, J. Li, X. Fu, J. Zhou, H. Tan, Q. Gu, Q. Fu, Biomacromolecules 10, 2857 (2009) http://dx.doi.org/10.1021/bm9006826[Crossref]
• [35] M. Lefebvre, C. Jacqueline, G. Amador, V. Le Mabecque, A. Miegeville, G. Potel, J. Caillon, N. Asseray, Int. J. Antimicrob. Ag. 36, 52 (2010) http://dx.doi.org/10.1016/j.ijantimicag.2010.07.008[Crossref]
• [36] J.J. Boelens, S.A. Zaat, J. Meeldijk, J. Dankert, J. Biomed Mater. Res. 50, 546 (2000) http://dx.doi.org/10.1002/(SICI)1097-4636(20000615)50:4<546::AID-JBM10>3.0.CO;2-Y[Crossref]
• [37] F. Esmaeili, M. Hosseini-Nasr, M. Rad-Malekshahi, N. Samadi, F. Atyabi, R. Dinarvand, Nanomed: Nanotechnol. Biol. M. 3, 161 (2007) http://dx.doi.org/10.1016/j.nano.2007.03.003[Crossref]

Identyfikatory

DOI

10.2478/s11532-012-0187-y